Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Wood shop is starting to take shape.

Featured Replies

4 minutes ago, mustanggt said:

I've been doing that starting today with those gummy type bars to clean it. I'll change the paper and start again. Thank you.

Yep, that's what I use..  Light bites and clean the paper.  The drum sander isn't meant to reduce thickness, it's to sand a surface.

  • Replies 57
  • Views 12.3k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • I have the Kreg perfect fence, very quickly adjustable for drift.  Works very well!

  • And for those bandsaw newbies I will present an alternate view.  Please read this with a positive, good natured tone ;-) I'm from the other camp; I do not acknowledge DRIFT.  In my world it is a

  • Actually, slowing the feed helps..  I run mine on the lowest setting most of the time.

Posted Images

  • Author

I made a mistake by not making the boards less thick with the planer before I got to this point. I do need to get it a little thinner. I've also found out it doesn't take much to make the drum to get real warm which is part of my problem too.

9 minutes ago, mustanggt said:

I made a mistake by not making the boards less thick with the planer before I got to this point. I do need to get it a little thinner. I've also found out it doesn't take much to make the drum to get real warm which is part of my problem too.

Yep..  If you're trying to use it to thickness, you're overloading the paper and that caused the burn and deep grooves.

Great dust collection will also help with the heat (really a must have for drum sander to work), as will speeding up the conveyor.  Also worth checking how much height 1/4 turn is on your machine that you mentioned doing - you may be going to aggressively for the drum sander.

I've also noticed that passing through the stock at an angle helps with heat too, rather than straight through (also spreads the wear out across paper more evenly).  Now I just do the final pass or two straight to keep the sanding marks with the grain, but all others are at an angle.

  • Author

I have an 800cfm Shop Fox DC. I will also speed up the feed. I'm at 3 now but can go up to 6. The end grain cutting board is pretty wide but can be sent through at a bit of an angle.

It all depends on how hard the wood is and how fine the abrasive is. You can take off a half turn if your using 36 grit on a narrow soft board.  If you use 180 a quarter turn will cause burns especially on maple or cherry, even at a slow feed rate.

Cleaning between passes can be nessasary if the wood is resinous or hard. Some of the more expensive abrasives don't build up w resin as fast. The blue or purple stuff is pricey but lasts longer if you keep it clean.

Just now, mustanggt said:

I have an 800cfm Shop Fox DC. I will also speed up the feed. I'm at 3 now but can go up to 6. The end grain cutting board is pretty wide but can be sent through at a bit of an angle.

Actually, slowing the feed helps..  I run mine on the lowest setting most of the time.

1 minute ago, mustanggt said:

I'm sanding purple heart and maple. I can go down to 80 grit if need be.

80 is what I run on mine 90% of the time.

  • Author

Thanks TIODS. About the feed belt speed. I've read that fast or slow is  best to keep from burning the paper. I'm confused.

I run slow feed, super light bites, clean the paper between passes, and have no real issues.

The dust collection on that machine is horrible at best.  This does not help the cause!  I have that machine and just giving you what's worked for me.

I think a drum sander is the most underrated piece of equipment in the shop!  However, that one is on my short list to be replaced with an upgrade!

If you have any burns after cleaning the abrasive go with a very light  1/16 of a turn and a slow feed rate. With experience you can figure out how much faster or heavier or a turn you can get away with. It changes with each grit.

  • Author

Yes I agree. It is a piss poor design and am disappointed in myself for not going better. However it fit into my budget as I have been buying tools like a drunken sailor and I committed to making cutting boards for my mom and aunt in three weeks. I started two months ago thinking I've got plenty of time and because of the steep learning curve with these machines I'm behind the 8 ball now.

4 minutes ago, mustanggt said:

Yes I agree. It is a piss poor design and am disappointed in myself for not going better. However it fit into my budget as I have been buying tools like a drunken sailor and I committed to making cutting boards for my mom and aunt in three weeks. I started two months ago thinking I've got plenty of time and because of the steep learning curve with these machines I'm behind the 8 ball now.

Just take super light bites and slow the feed rate down - Yes, you're going to be there for a while if you have a lot of flattening to do.  But, that's a learning lesson and a mistake you probably won't make again ;)

I can do end grain cutting boards with inlays in about 2 days.  You can too, once you get it all figured out..  Feel free to drop me a pm if you have specific questions on them.

1 minute ago, mustanggt said:

Thanks a lot for the help and the offer. I sure do appreciate it.

Always happy to help

I have the same sander, and while it is not the greatest, it is better than none at all.  Like Kev said slow down the feed rate, and I never go over a 1/8th turn on the wheel.  (Read someplace that 1/128th is the max cut for a drum sander.)  This sander also has some built in backlash, so lowering the feed table and then raising it for the first cut will remove the backlash (slop) in the feed table.  Hope this helps.

11 hours ago, wdwerker said:

If you have any burns after cleaning the abrasive go with a very light  1/16 of a turn and a slow feed rate.

Hi Guys-

I am confused by slowing the feed rate if you have heat or burning... That to me would cause more heat build up as the drum is moving the same speed while the conveyor is slower and therefore more chance to build up heat with slower feed rate.  This seems to be supported by instructions for drum sanders. 

This is an excerpt from Jet's 2244 manual:

"Also try a faster feed rate or less depth of cut if the stock you are working begins to show burn marks. With cherry, hard maple or other hardwoods, using a shallower depth of cut and a faster feed rate will help minimize burn marks. Slightly angling the stock as it is fed into the machine will also help prevent burning the stock."

And from the Powermatic PM2244 almost the exact same thing - "Also try a faster feed rate or less depth of cut if the stock you are working begins to show burn marks. With cherry, hard maple or other hardwoods, using a shallower depth of cut and a faster feed rate will help minimize burn marks."

I am curious about your experience on this - as it sounds like you guys experience the opposite on the feed rate. After reading the above when I got my own drum sander, I started moving the conveyor at a higher rate and I can feel how less warm the stock is when it passes through, even after a bunch of passes. Not saying the manuals have all the answers, but want to hear from you guys who've been using these for a while.

I can appreciate it is a balance of depth of cut (this is probably most important) and speed rate, but wondering specifically on the speed rate, thanks

  • Author

That is why I have been confused about this. I've been splitting the difference and leaving it on 3.

1 hour ago, cjtboy said:

Hi Guys-

I am confused by slowing the feed rate if you have heat or burning... That to me would cause more heat build up as the drum is moving the same speed while the conveyor is slower and therefore more chance to build up heat with slower feed rate.  This seems to be supported by instructions for drum sanders. 

I agree generally.

However, at least with the Supermax and any other model that has "Intellisand" or other similar governing mechanisms, the critical factor ends up defaulting to depth of cut, regardless of your speed, because if you try to take off too much in one pass, the governor kicks in and slows down the belt to a crawl.

So, ultimately, the key is light light LIGHT passes.  I tend to keep higher grits on my DS so my max turn is usually 1/8 or less...extremely light passes.  Otherwise it's burn city for me and one heavy pass can ruin an entire strip of paper.  I don't misuse my DS as a planer like some other guys, so it's not a problem for me.  It's a SANDER, not a THICKNESSER!

I haven't had my drum sander for long, but found out quickly. The higher the Janka value the more course the paper needs to be. 120 seems to work fine on Walnut and Cherry, but even 80 grit is too high for cocobolo. Cocobolo is like trying to sand a boulder !

6 minutes ago, Janello said:

I haven't had my drum sander for long, but found out quickly. The higher the Janka value the more course the paper needs to be. 120 seems to work fine on Walnut and Cherry, but even 80 grit is too high for bocote. Bocote is like trying to sand a boulder !

FTFY

The slower speed can allow the abrasive to remove what might otherwise stall the drum and or cause a burn. It takes some experience and intuition to run a drum sander. Just remember the finer the grit the lighter the pass needs to be. I have found with fine grits I can leave the setting where it is after a pass, spin the board end for end and run it again and get an improvement in the quality of the surface. I just barely bump the crank and run at high speed, but I also keep an eye on the abrasive for resin building up.

I often run batches of parts through the drum sander to get them all the identical thickness. These come off the tablesaw all cut at the same setting but the calipers will show some as being thinner due to having less than perfect pressure to the fence. This also removes any saw marks. I run a pencil line down each strip and sand until the lines are all gone. 120 grit and full speed with less than a 1/16 of a turn cleans up the edges of Baltic birch strips but sometimes it takes 2 passes.

A quick crosshatch pattern with a soft 2B lead in my pencil lets me know when I have taken off just the minimum to clean up and flatten a board while removing the least thickness.

1 hour ago, Janello said:

I haven't had my drum sander for long, but found out quickly. The higher the Janka value the more course the paper needs to be. 120 seems to work fine on Walnut and Cherry, but even 80 grit is too high for cocobolo. Cocobolo is like trying to sand a boulder !

Totally true (although I do find 80 grit on a DS to be coarse enough to sand a boulder).  But 150 or 180 ain't gonna last long on something super dense like bubinga or cocobolo...bocote, that is.  The higher oil content is also a factor I believe.

150 -180 on oily woods take the lightest pass possible and clean between every pass. When I recently was cleaning up some 1/4" X 1/4" cocobolo I ran it then moved over and ran it again just barely bumping the handle each time. A white colored pencil shows up well on dark woods. I was rolling the piece to keep it square. After I traveled across the total width I cleaned the abrasive. 120 -150 is plenty w padauk , cocobolo , teak any finer is just asking for trouble .

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.