Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Wood shop is starting to take shape.

Featured Replies

I finally got my Laguna 14 twelve set up and working. Right out of the box it didn't have the two of the four sideplates for making the base. I called them and got those plates here within the week. Got the base together with the mobility kit, had my SIL help me upright it and started tuning it. The throat plate was bulged around the throat. It was easy to discern in the right light so no matter what I did I couldn't level it. The fence slot for the tall fence was bent so I couldn't slide it on to use it. Called Laguna again and they put the whole team on it it seemed and they got me squared away with both parts. I had three separate people helping me which was very nice. I received the parts in two days and was back in business. Their customer service is outstanding. My only concern is what I surmise to be screwed up parts being packed in Taiwan and no one knows it happened till the customer opens the box. However at least the customer service more than makes up for this situation to make the customer whole.

It is a fairly steep learning curve for me but am getting more and more up to speed with it. Getting the blades coiled back up again sure is a pain in the ass!!!(watched all the videos)

I got it finally all tuned today. I had to put two layers of electrical tape on the fence to get it to square up to the blade and table. I am really enjoying the power of this saw and how effortlessly it cuts pine. The real test of course will come with the hardwoods I will cut in some upcoming projects. So far I like it.

  • Replies 57
  • Views 12.3k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • I have the Kreg perfect fence, very quickly adjustable for drift.  Works very well!

  • And for those bandsaw newbies I will present an alternate view.  Please read this with a positive, good natured tone ;-) I'm from the other camp; I do not acknowledge DRIFT.  In my world it is a

  • Actually, slowing the feed helps..  I run mine on the lowest setting most of the time.

Posted Images

  • Author

Brendon, it's not just Laguna that has that happening. I bought a Jet 9"/ 6x48 sander that had the aluminum disk broken all the way around where it attached to the shaft. They sent me a new disk and I was back in business. Common denominator is Chinese manufacturing. I've never had a Chinese anything that I was totally happy with. There always seems to be issues.

I'm curious why you had to use the electrical tape?  The fence should be adjustable for that exact reason.

Do some looking on youtube to see how to adjust for the drift.  I've never had the fence square to my blade on either of my band saws because of the adjustment for drift.

I think Marc has a band saw set up video on the free side as well.

I could be wrong Kev but I think what he was doing with the tape was using it as a shim between the fence support and fenceto get the fence 90 degrees to the table. 

Yep I had to shim the fence on my 1412 as well to get it square to the table.  I used aluminum foil.  That's quality control baby!

1 hour ago, Chet K. said:

I could be wrong Kev but I think what he was doing with the tape was using it as a shim between the fence support and fenceto get the fence 90 degrees to the table. 

Ah, ok..  That makes more sense.. 

  • 2 months later...

Hmmmm ... I got a Laguna 1412 in December 2015. On mine the fence is adjustable to make it parallel to the miter slot using three hex head bolts on the fence carriage. The fence also can be adjusted so it's 90 degrees to the table using two hex head screws on the fence carriage. Nice. I really like this saw!

7 minutes ago, highdesertdreams said:

Hmmmm ... I got a Laguna 1412 in December 2015. On mine the fence is adjustable to make it parallel to the miter slot using three hex head bolts on the fence carriage. The fence also can be adjusted so it's 90 degrees to the table using two hex head screws on the fence carriage. Nice. I really like this saw!

I see the three for the drift alignment (BTW...those three are so you can set your fence to the DRIFT, not the miter slot...that adjustment would be next to useless) but I don't see the two screws for the 90* fence-to-table alignment...you got a pic by chance?

Eric, here is a photo of mine, on my 1412,  it is two set screws one above the other, between the two knobs.  In the photo you can see the bottom one with locktite on it, but the top one is hard to see in the photo because of the cast iron texture.  The bottom one came with the locktite on it, and I don't know why and I have only had to use the top one anyway.  Its a minor process because you have to loosen the knobs adjust the set screw and tighten the knobs then check for square, rinse and repeat.

IMG_4844.jpg

Well I'll be a son of a biscuit head.  Mine does not have those two set screws.  That's BS.

Hey-oh, wow! This is great info. Don't think it was in the manual.  I ended up dialing my fence in with a few pieces of blue masking tape, but like this set screw option more for sure. thanks for posting.

   I have the Kreg perfect fence, very quickly adjustable for drift.  Works very well!

On March 27, 2016 at 11:29 AM, Eric. said:

I see the three for the drift alignment (BTW...those three are so you can set your fence to the DRIFT, not the miter slot...that adjustment would be next to useless) but I don't see the two screws for the 90* fence-to-table alignment...you got a pic by chance?

Yes. You are correct. DRIFT. Thanks for the clarification. I was trying to present the info for a bandsaw newbie who might not know what drift is, but would know what a miter slot is. Having re-sawed 1000s of lineal feet of hardwood I'm all too familiar with drift. Unfortunately.

And for those bandsaw newbies I will present an alternate view.  Please read this with a positive, good natured tone ;-)

I'm from the other camp; I do not acknowledge DRIFT.  In my world it is a mythical entity. :D  I align my saws to cut straight and just go ahead and use them that way.  I have setup 10", 14" and a couple of 17" saws and change blades on all of them with impunity.

The solution seems to be coplaner wheels among other things. I know, I know, some experts made passing remarks about this being unimportant and anyone who didn't want to bother putting out the effort jumped on the bandwagon ;).  Proper blade tension (probably less than you think) is also key as is table alignment (I use my miter gauge on the bandsaw sometimes).

I can run a 3/4" blade and swap to a 1/4" blade with the only adjustments being the guides and where the blade rides the wheel.  I slice fat 1/16" veneers off of slabs and resaw tall material with pretty reasonable thickness consistency.  I'm not boasting; I just want to present an opposing viewpoint :).

Here's a slice off a random piece of scrap.  This blade happens to be a 3/4" Timberwolf 2-3 tooth.  Not my first choice for veneer work but, it was what happened to be on the saw:

 

Veneer resaw.jpg

52 minutes ago, gee-dub said:

 

The solution seems to be coplaner wheels among other things. I know, I know, some experts made passing remarks about this being unimportant and anyone who didn't want to bother putting out the effort jumped on the bandwagon ;). 

 

I hope this works just as well for me, cause I spent at least a day getting the wheels coplanar on my Rikon 10-325. What a bitch it was! I haven't used it to resaw or rip yet though.

Hey gee-dub,

Thanks for the heads-up on coplaner wheels. This is news to me. Think I'll give it a try. Why do the "experts" say it is unimportant ? Is there a downside to having wheels coplaner ? My experience has been that different blades and different levels of blade sharpness affect drift, but you're saying that it all boils down to having wheels coplaner ? How is table alignment different than adjusting the fence for drift or do you mean aligning the table to align the miter gauge to the blade? This is all very interesting. I love learning new stuff. Thanks again.

I said "The solution seems to be coplaner wheels among other things" ;).  Damaged blades (through wear or misadventure) can certainly make things track poorly.  Other incorrect situations can also contribute to poor tracking.  I have just found that all other things being correct, wheels out of plane can still cause you to chase a solution till the end of time (or until you spend money on some solution in search of a problem) :).

The "experts" I mention are popular demonstrators or magazine article subject who are indeed knowledgeable and talented. Other experts state that coplaner wheels are part of the tool's design and should certainly be present just as belt pulleys should be coplaner on belt driven tools or any other similar mechanical example.  I was just being my typical dry-humored self when I touched on the fact that some "experts" don't agree with other "experts".

In speaking to table alignment, I use jigs and a miter gauge on the bandsaw; not everyone does.  For me having the miter slot aligned with the blade on the bandsaw is just as important as on the tablesaw.  Having the table aligned perpendicular to the blade is also important in some operations as far as blade tracking goes.

Since I apparently cannot be brief :D I will talk about non coplaner wheels on crowned tire machines.  Picture the blade riding appropriately on the drive wheel but, being too far forward or behind on the idler wheel due to being out of plane.  You can see from the pic below how this would cause tracking issues.

 

Blade Track 1.JPG

Blade Track 2.JPG

I better wander off now before I get the reputation of being a blabbermouth.

  • Author

I'm pleasantly surprised this thread is still going all these months later. Since that time my shop has gotten more crowded with new tools. I finally got a table saw and that has really made up for lost time in the projects I have planned for completion in a few weeks. I am still struggling with that damn Grizzly G0458 drum sander. It really is a poor design but I have gotten used to its quirks and am able to move forward with the work. The only thing I can't figure is how it burns the wood. I am not dialing in any more than a quarter of a turn or less in order to mitigate this and I still get it. Any ideas?

1 minute ago, mustanggt said:

I'm pleasantly surprised this thread is still going all these months later. Since that time my shop has gotten more crowded with new tools. I finally got a table saw and that has really made up for lost time in the projects I have planned for completion in a few weeks. I am still struggling with that damn Grizzly G0458 drum sander. It really is a poor design but I have gotten used to its quirks and am able to move forward with the work. The only thing I can't figure is how it burns the wood. I am not dialing in any more than a quarter of a turn or less in order to mitigate this and I still get it. Any ideas?

Leave the hood screw loose and clean the paper between passes.

  • Author

I've been doing that starting today with those gummy type bars to clean it. I'll change the paper and start again. Thank you.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.