Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Acceptable moisture content range

Featured Replies

I picked up the lumber for my knockdown Nicholson workbench today. Im using 2x12 SYP. When I got them home I checked the MC and they range from 7 to 8.5. I have another 2x12 board in my shed that I'm also using in the project. It's been in the shop since last summer so I'm using it to judge the equilibrium value for the shed. That board is around 10.5%.

Is the difference between the new lumber and the equilibrium value too great to start working on the bench?

Sent from my iPad using Tapatalk

It is not about the difference at all. Readings will vary from board to board based on salinity and mineral content. It is better just to wait a few days to see if the meter changes. Wait until it stops changing. Better yet, weigh a board if you are able. Meters I can afford are only a rough measure tool. 

6 hours ago, C Shaffer said:

. Meters I can afford are only a rough measure tool. 

That's the darn truth.  A buddy of mine that cuts wood for a living carries around a $4-500 meter. No thanks.  $40 amazon special for this guy. 

30 years ago I built a huge outfeed table from SYP. I didn't know much about wood movement or moisture content back then. As some of the boards dried out they shrunk & cupped. Fast forward 30 years the table had a hump in the middle and all 4 edges were curled downwards. It was oversized for its new location when I moved the shop. Cutting it down, replacing the top and getting everything flat and straight took several days that I really needed to be doing other things. 

Once SYP has dried and cured it's incredibly harder, stiffer stuff. At a minimum make sure it's all pretty close in moisture content before you start working it. Dress your boards when the moisture content has stabilized and sticker them then give them a few days to relax and react to the stock removed to square them up. Re dress & re-square the stock then you can start selecting which pieces to use for the top slabs & leg blanks.

The time , effort and material you remove dressing the boards now will benefit you for the life of the bench.

Steve, when you say "dress" is that synonymous with "mill"?  Or is it a more specific term?

 

sorry for the dumb Q.

 

thanks, Matt 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.