Bob Ross 2.0 Posted March 23, 2016 Report Posted March 23, 2016 Hello. I am just posting a couple videos I did of my 2’nd and 3’rd bandsaw boxes I EVER made. The video for the redheart one is in 3 parts and the Zebrawood box is in a single video. A word of caution/warning…. Get your popcorn ready LOL! These are long tutorial/videos. I kinda realize they are a bit lengthy and will not be for everyone, and I am not any master woodworker by ANY means… and I am most certainly not trying to sell anything, if anyone is interested, I have posted the links below… ** If you find that the videos stink, please refrain from making negative comments. I am struggling enough with putting these out there, I do not like looking like I am trying to brag or sell something, but my family insists that I ask for opinions from others to see if there are suggestions that may help me in the future.. Thank you all for being understanding. This is the 2’nd bandsaw box |I have ever made. I made it from Chatke-Kok (Redheart), Ash and African Blackwood. I even put a challenge to Scott Phillips in there somewhere! (But I doubt he will respond LOL!) https://youtu.be/g0C6CQww72U This one is the 3’rd bandsaw Box I have ever made and I made it from Zebrawood and Poplar. https://youtu.be/VQskQjD5Bq8 Quote
Popular Post Brendon_t Posted March 23, 2016 Popular Post Report Posted March 23, 2016 54 minutes ago, Bob Ross 2.0 said: On , but my family insists that I ask for opinions from others to see if there are suggestions that may help me in the future Advice, come around more, make some friends THEN share your videos. 3 Quote
wtnhighlander Posted March 24, 2016 Report Posted March 24, 2016 What Brendon said. I did peruse through both videos, just hitting the high spots. My advice consists of only two suggestions, priced at $0.01 each. First, we don't have time for feature-length films about bandsaw boxes. Second, most folks find more appeal in a talking face, rather than hands with a disembodied voice. Make a connection with your audience by facing the camera and talking to them whenever possible. I hope you take these comments as constructive suggestions, not negatives. Keep it up, and keep improving! Quote
..Kev Posted March 24, 2016 Report Posted March 24, 2016 Same here.. I just didn't have time to watch them full length. Suggest cutting down the repetitive steps which could cut a lot of time out. It's not easy to film what you're doing and explain at the same time. That's where the magic of editing comes in. Welcome to the forums and please consider this all as constructive.. Quote
Bob Ross 2.0 Posted March 24, 2016 Author Report Posted March 24, 2016 No worries, i'm taking it all as constructive criticism. Thank you. I know they are long, I need to learn better editing. Quote
Popular Post Eric. Posted March 24, 2016 Popular Post Report Posted March 24, 2016 Yeah there's no possible way I'd spend three hours on those videos...I could have built my own box by then. For such a simple project, you should be shooting for ten minutes or so. Look up the Drunken Woodworker's videos on bandsaw boxes for a basic template. I do like your designs and your final products though. Just WAAAY too long. Please make this your avatar or I'll have to do it for you. Thanks. 5 Quote
mds2 Posted March 24, 2016 Report Posted March 24, 2016 I like the designs they are good looking boxes. I'll reiterate what others have said about the length. Presonnally I dont care about a smiling face, I like seeing the work being done. Quote
Bob Ross 2.0 Posted March 25, 2016 Author Report Posted March 25, 2016 Thank you for the Avatar Picture Eric. Thank you all for the constructive criticism. I know they are way too long, but these are also my first videos so I need to figure out what is really not important that can be chopped out. Problem I have is trying to figure out what is not important. I have alot to say and show for the steps, my problem is picking what is "Necessary" and what is not but still be enough that the steps get shown. I need to learn and find that balance without being ... Boring or overdoing it... If anything, I am rather unique.... I guess just not in a great way. But I am learning. I know these videos are not for the experienced woodworkers or even the intermediate level woodworkers either, I guess I am trying to over do the teaching portion. I really thank you for your input guys... And the time you took Eric to post my new avatar pic! 2 Quote
mkrusen Posted March 25, 2016 Report Posted March 25, 2016 Yeah there's definitely a fine grey line between too short and too long. Watch some videos by Down to Earth Woodworker. In my opinion, while informative at times, they are entirely too long and drawn out. You may get a good idea of what "too long" or "too much detail" is and you can adjust your videos accordingly. As for bandsaw boxes, I agree with Eric that Drunken Woodworker's videos are great for that kind of thing. Good luck with your youtube endeavor! Quote
Bob Ross 2.0 Posted March 26, 2016 Author Report Posted March 26, 2016 Again, Thank you to everyone. I hope you all have a great and very Happy Easter Holiday! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.