Pwk5017 Posted May 31, 2016 Report Posted May 31, 2016 All this talk of venting outside the last year never impacted me much. It just didnt seem worthwhile to exhaust conditioned air outside. Then, I finally cleaned my filter stack after a year and a half of use. For those that havent properly done this before, it sucks beyond belief. After 2-3 hours of cleaning, I was blown away by how much air I was moving. So much so that it made my subconscious revisit the exhaust idea. I dont know that I would want to exhaust outside 100% of the time though. I have a window 5' from my cyclone that slides open, but it is 25-30' from my neighbor. I also dont know how i feel about throwing AC out the window at 1600cfm when its 95 and 80% humidity outside. Conversely, when its 10° outside. Has anyone ever seen a split exhaust system to where you could choose to vent outside if it was a nice day during non-sleeping hours, versus filtering the air during off hours/unseasonable weather? It would involve some type of Y off the cyclone with blast gates etc, i assume. Dunno if this sounds like a dumbass idea fraught with issues or not. I worry about my DS clogging my filter the most. Jointer/Planer could always be dedicated to internal filtering. Table saw would be a split decision. Quote
Tom Cancelleri Posted May 31, 2016 Report Posted May 31, 2016 You could do it. It's going to require custom fabrication for your exhaust piece. If you draw it up a sheet metal shop can make it. Sent from my Nexus 6P using Tapatalk Quote
Janello Posted June 1, 2016 Report Posted June 1, 2016 Cars have that knob on the dash. Sounds like a great idea, and i may just steal it when i put in a new system. Just don't ever forget to have at least one gate open or you'll crush your piping system. Quote
shaneymack Posted June 1, 2016 Report Posted June 1, 2016 12 minutes ago, Janello said: . Just don't ever forget to have at least one gate open or you'll crush your piping system. I think youd have to have some cheap pipe for that to happen. Ive done it a few times and nothing happened. Quote
Pwk5017 Posted June 1, 2016 Author Report Posted June 1, 2016 6 minutes ago, Janello said: Cars have that knob on the dash. Sounds like a great idea, and i may just steal it when i put in a new system. Just don't ever forget to have at least one gate open or you'll crush your piping system. Yeah, that was one of my fears. I would need to print out a giant warning sign to check a blast gate is open. I primarily want to exhaust outside for when I drum sand. That damn machine kills filters. The cyclone does a great job at separation, but even 2-5% of the total mass is a ton of dust for the filters to handle. Furthermore, the filters on the grizzly are low on surface area compared to the clearvue. About half if I'm not mistaken. it would be two fold to exhaust the fines outside, and boost air flow without the filter resistance. I'm going to look into it a bit more. Quote
Mick S Posted June 1, 2016 Report Posted June 1, 2016 Most quick clamp type pipe manufacturers have diverter valves available that do exactly what you're talking about. Not cheap, but it is a readily available option. I've seen people just vent through a 6" or so pipe connected to a 90 degree elbow that can be rotated 180 degrees with a pipe clamp to do the same thing. Quote
krtwood Posted June 1, 2016 Report Posted June 1, 2016 You'd want to be really sure you aren't leaking any air there. Leaks on the positive pressure side send the dust back into the shop. I don't know if I'd trust my blast gates for that. Quote
pkinneb Posted June 1, 2016 Report Posted June 1, 2016 1 hour ago, shaneymack said: I think youd have to have some cheap pipe for that to happen. Ive done it a few times and nothing happened. Agreed I do this quite frequently not for long periods but when I am switching machines no issues. I did use the thicker pipe (not spiral) that Onieda air sells. Quote
Pwk5017 Posted June 1, 2016 Author Report Posted June 1, 2016 8 hours ago, krtwood said: You'd want to be really sure you aren't leaking any air there. Leaks on the positive pressure side send the dust back into the shop. I don't know if I'd trust my blast gates for that. You mean if i leak exhaust outside without makeup air then the dust will come back in? Something to think about. I know for sure my blast gates arent air tight, which is why i dont worry about pipes collapsing with all of them shut. I would worry about the filter gates getting destroyed when i forget to open one, and i have gates open on the sucking end. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.