Recommended Posts

Posted

Anybody got one?

I've seen a great deal on one and the reviews say it is as good as the obvious green one but it is slightly cheaper in cost. Oh and it is also made in Germany - just like the green one.

Posted

I have a 60% rule.  If something is 60% of the cost of the known "good one" I just save a for a bit and get the "good one".  That being said, no one says the the green one is the "good one" in every category.  Festool scores overall in the middle of the pack often enough.  If legendary dust collection performance is high on your list then, they are the de facto "good one".  In other areas, not always.  Is there a feature on the Bosch besides price that would make it your choice?

Posted

 

13 minutes ago, gee-dub said:

I have a 60% rule.  If something is 60% of the cost of the known "good one" I just save a for a bit and get the "good one".  That being said, no one says the the green one is the "good one" in every category.  Festool scores overall in the middle of the pack often enough.  If legendary dust collection performance is high on your list then, they are the de facto "good one".  In other areas, not always.  Is there a feature on the Bosch besides price that would make it your choice?

I do have a few Bosch blue tools already and find them very good. The reviews of the tracksaw seem to show that it is very good (although I'm not too sure who wrote them) and my opinion generally get swayed by reviews.

After hearing a few Festool reports on here I'm not so sure that their tracksaw is as much of a game changer that the Domino is.

Posted

Bosch has a track saw?  I had no idea.  I think the consensus is the Dewalt and Making track saws are very nice, and offer comparable quality to the FS.  I'm sure Bosch is in thaw that category as well.

Posted

I have several Bosch blue tools and they're great performers. I don't know about GKT 55 though.

My only complaint about Bosch is their online users... Seems to me that most of them are professionals/contractors and they're not always willing to share their solutions when you post inquiries. It happened to me with my Bosch jobsite table saw when I was trying to get information about the arbor.

Posted

I wish this was sold in the US.  It's as if Bosch does not market their "professional" tools to the US at all.  Or at least they don't make the distinction between professional and consumer tools here.

Anyway, they use the same tracks as Mafell, which go together much more nicely than the Festool ones.

Posted

I'm surprised that the Bosch track saw is not available in the US. I looked at the Festool (they make quite a few now), the Dewalt, the Makita and the Bosch in store. The Bosch is not cheap and normally is around the same price as the Festool TS55 and HK55.

I liked the tracks as the two supplied are 1.6m long instead of the 1.4m ones with the FS and the 1.5 metre Dewalt. That means for the Bosch there is about 7.5" overlap either side of a 4 foot sheet. Also the track is more substantial than the FS and the locking plate uses cams instead of grub screws. I'm led to believe it is the Mafell track as that was mentioned by the guy in store too. However it does have an insert plate on the base of the saw that can be removed. That enables it to fit other brands of track. The blade changing was as easy as the FS and the plunge mechanism was the same single pivot as the FS with a nicely weighted spring return.

There are soft start electronics preventing that startup lurch you normally see on cheaper circular saws. The saw was as well made as the FS and cut quality was excellent both on the keeper and the waste.

It has positive stop locking angles of 0 and 45 degrees when bevelling. It will also has an override button that allows -1 and 47 degrees to allow overcut/undercut.

The other differences were a slightly more powerful motor and a transparent retractable dust shroud that could be pushed down on the non track side of the blade. This improved the dust collection. Also my brand of dust collector fitted the output nozzle (it didn't fit on the Festool without some duct tape). 

However what nailed it for me was the L-Boxx that it comes with. As I already have a few Bosch blue power tools they also have L-Boxx containers and, like the Festool Systainer system, clip together. I guess once you start buying into a system the containers they come in affect your choice.

So there it is I ordered one based upon the plastic box it comes with ! :DLOL seriously I would have bought the Festool if I didn't already have Bosch power tools and the problem with my dust collector hose not fitting the Festool.

I won't bother with a review as it looks for the time being that it can't be obtained in the USA.

Posted
34 minutes ago, TerryMcK said:

 

I'm surprised that the Bosch track saw is not available in the US. I looked at the Festool (they make quite a few now), the Dewalt, the Makita and the Bosch in store. The Bosch is not cheap and normally is around the same price as the Festool TS55 and HK55.

I liked the tracks as the two supplied are 1.6m long instead of the 1.4m ones with the FS and the 1.5 metre Dewalt. That means for the Bosch there is about 7.5" overlap either side of a 4 foot sheet. Also the track is more substantial than the FS and the locking plate uses cams instead of grub screws. I'm led to believe it is the Mafell track as that was mentioned by the guy in store too. However it does have an insert plate on the base of the saw that can be removed. That enables it to fit other brands of track. The blade changing was as easy as the FS and the plunge mechanism was the same single pivot as the FS with a nicely weighted spring return. The saw was as well made as the FS and cut quality was excellent both on the keeper and the waste.

It has positive stop locking angles of 0 and 45 degrees when bevelling. It will also has an override button that allows -1 and 47 degrees to allow overcut/undercut.

The other differences were a slightly more powerful motor and a transparent retractable dust shroud that could be pushed down on the non track side of the blade. This improved the dust collection. Also my brand of dust collector fitted the output nozzle (it didn't fit on the Festool without some duct tape). 

However what nailed it for me was the L-Boxx that it comes with. As I already have a few Bosch blue power tools they also have L-Boxx containers and, like the Festool Systainer system, clip together. I guess once you start buying into a system the containers they come in affect your choice.

So there it is I ordered one based upon the plastic box it comes with ! :DLOL seriously I would have bought the Festool if I didn't already have Bosch power tools and the problem with my dust collector hose not fitting the Festool.

I won't bother with a review as it looks for the time being that it can't be obtained in the USA.

 

A short review would still be appreciated by some of us, even if just out of curiosity :)

  • Like 1
Posted

Correct

Thanks for confirming, Terry. I wasn't 100% sure it wasn't just a poor photo of the bosch.

I'd love a review of the Bosch once you've given her a spin. Looks like a nice saw.

Sent from my SM-N910W8 using Tapatalk

Posted

I'm just asking the question on the Bosch forum as to whether anybody has experienced an issue due to the lack of a riving knife when ripping particularly lively case hardened woods. I'll do a review when I've had chance to try it out in the shop (it arrived about a couple of hours ago but I'm still working).

 

I think most people would use it on man made sheets goods though.

 

  • Like 1
Posted
40 minutes ago, TerryMcK said:

I'm just asking the question on the Bosch forum as to whether anybody has experienced an issue due to the lack of a riving knife when ripping particularly lively case hardened woods. I'll do a review when I've had chance to try it out in the shop (it arrived about a couple of hours ago but I'm still working).

 

I think most people would use it on man made sheets goods though.

 

Yeah, I've seen your thread.

Welcome to the Bosch Professional forums, the most useless woodworking forums in the inter webs! :P

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 66 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined