Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Board Room

Featured Replies

I figure I mind as well throw my hat in the ring and do a shop tour. I plan to document the changes that will be as time goes on.

 

We bought the house back in April, and this is the first real dedicated space that can be setup as a functional shop. I have been slowly collected tools over the years, but am ready to setup a dedicated woodshop. I grew up in my Dads and Granddads woodshops. Woodworking is in my blood, or so I'm told. 

Specs:

-2 car garage ~400sqft

-Furnace and hot water heater in the corner

-And my nemesis is a support post in the middle

 

Looking in from the door to the house

IMG_1978.JPG

I also have to store lawn equipment and childs toys in here. When we redo the backyard I plan on a tools shed and they will live there. 

Planning on a miter station along this wall. 

IMG_1979.JPG

From the back of the garage. Just noticed the saw blade is up in this picture. I was cutting french cleats before I took the picture. I am pretty OCD about retracting blades and unplugging machines. I have a 4 year old that spends alot of time in the shop with me. He knows what he can and cant touch, but you can never be too safe.

IMG_1980.JPG

I need to figure out a heating solution. The other night it was a little chilly in there so I turned on the halogens and pointed a fan at them. Worked OK but not very energy efficient. 

IMG_1981.JPG

Hung those cabinets this weekend. House two doors was flipped and I snagged these when the were gutting in. 

IMG_1982.JPG

Scored three of these light fixtures from work. They were being thrown out. never even turned on. 8ft 4 bulb T8 florescent. Also the pole that I just freaking love. 

IMG_1983.JPG

I cant decide if I want the where it is now, or swap it to the other side of the pole. I have it there for now and has been working fine. I cut down sheet goods with a circular saw and homemade guide. 

Any suggestions on a more efficient layout are welcomed. 

More to come as the shop evolves

Looks like a great space, Matt. I look forward to following along as you work on your shop.

Sent from my SM-N910W8 using Tapatalk

Cool, thanks for sharing.  I don't have much good feedback on layout, depends on you and what kind of stuff you like to build, how you like to work, etc.

400 sq feet would feel huge. I like the space.   I bought a cheap floor heater a while ago and it does just fine when the night makes the shop too cold.

  • Author

I didnt mention it in my initial post, but I am planning on a new workbench at some point. Will be going in the empty space beside the assembly/outfeed table. I am not sure what kind of bench yet. I love the Roubo, but cant justify $2k on a bench. 

8 hours ago, MattF said:

I didnt mention it in my initial post, but I am planning on a new workbench at some point. Will be going in the empty space beside the assembly/outfeed table. I am not sure what kind of bench yet. I love the Roubo, but cant justify $2k on a bench. 

I'll suggest something taboo, make it out of pine. Personal opinion but good hardware and a pine bench could lead to a hardwood bench in the future that uses your still good hardware. A few of the guys on this site make great stuff on pine benches.

8 hours ago, MattF said:

I didnt mention it in my initial post, but I am planning on a new workbench at some point. Will be going in the empty space beside the assembly/outfeed table. I am not sure what kind of bench yet. I love the Roubo, but cant justify $2k on a bench. 

Do like The "nut" said... Pine.. but where you plan to put your dog holes, get a piece of hardwood in that position, that way the holes will last a hell of a lot longer, oak or above.  And I make decent stuff on a poplar bench, but the dogholes will elongate, I'm seeing signs of that happening on mine.  Use something hard in your doghole  line.

  • Author
3 hours ago, Chestnut said:

I'll suggest something taboo, make it out of pine. Personal opinion but good hardware and a pine bench could lead to a hardwood bench in the future that uses your still good hardware. A few of the guys on this site make great stuff on pine benches.

I have been contemplating doing this. Was thinking pine or douglas fir. I really like the Benchcrafted hardware. I am a manufacturing engineer and design alot of tooling. Their stuff just seems top notch, very well made and held to somewhat tight tolerances. Quite pricey, which will be the limiting factor.

2 hours ago, RichardA said:

Do like The "nut" said... Pine.. but where you plan to put your dog holes, get a piece of hardwood in that position, that way the holes will last a hell of a lot longer, oak or above.  And I make decent stuff on a poplar bench, but the dogholes will elongate, I'm seeing signs of that happening on mine.  Use something hard in your doghole  line.

Good call on the dogholes. I read that somewhere else also. It may have been you.. 

One more point, if you plan to use Benchcraft's hardware, plan for , again, hardwood for your vises.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.