Popular Post gee-dub Posted November 25, 2016 Popular Post Report Posted November 25, 2016 Calling this a Project Journal is a bit optimistic. Between work and life in general folks will not be getting the usual cornucopia of goodies from my shop this year. The one exception is my MIL who has been wanting, of all things, a key holder made by her favorite son-in-law. The wife ran interference and I got a few hours yesterday and today in the shop. Maybe this will help some other poor soul who has to make a quick last minute gift . . . I was really taken with the combination of cherry and bubinga in Eric's media cabinet. I would never have thought to put those materials together but, they looked great. Duly inspired, I headed to the shorts bins and dug out some cherry and bubinga. I'm kinda making this up as I go along nourished by mom's many requests/descriptions throughout the year ;-) I like sliding dovetails on small cabinets because it makes easy, strong joinery and they are quick to do. To assure alignment I "gang" the top and bottom for routing. The parts are different thicknesses but, I just use packing tape to "gang" them on the reference surface. I use the same bit and the tenoning jug for the side pieces. And here's the basic blanks. Long ago when I thought I was going to do a different type of woodworking I made a coping sled. Amazingly, I actually found it and put it to use. I use a little apron plane to smooth the end grain. Other parts get a kiss from a hand plane as well. This saves surface prep time and I am in a hurry . . . The "box" will hang on the wall so I use keyhole slots. I will use cherry dowels for the pegs and cut them to length on my oh-so-sophisticated crosscut station. Having a DP table that tilts easily and reliably is not a mainstay in my shop but, when I need that function it is nice to have. The little guy mounts to the wall. A bit of shellac and it looks like so. There are some shallow grooves and "dots" milled into the front edge of the top and bottom to give the thing a little character. These do not show well in the flash pics so you'll have to take my word on that A key holder is not for everybody. I personally prefer to keep my keys out of site. But, for mom and at the last minute I think this will do. 3 Quote
treeslayer Posted November 25, 2016 Report Posted November 25, 2016 way to knock one out in a hurry gee-dub, looks great and full credit from the wife and MIL will go a long way to a happy life. Quote
Eric. Posted November 25, 2016 Report Posted November 25, 2016 Very cool GD. And a damn fine combo of woods ya got there, if I may say so... ...if you inlayed the groove and dots with pillowed bubinga....?....pow! Quote
Popular Post ..Kev Posted November 26, 2016 Popular Post Report Posted November 26, 2016 That face palm moment when you realize that you never considered your tenoning jig to make the sliding dovetails Very cool! Nice work! 3 Quote
wdwerker Posted November 26, 2016 Report Posted November 26, 2016 I picked up on that as well ! Great idea ! 1 Quote
gee-dub Posted November 26, 2016 Author Report Posted November 26, 2016 18 hours ago, Eric. said: Very cool GD. And a damn fine combo of woods ya got there, if I may say so... ...if you inlayed the groove and dots with pillowed bubinga....?....pow! Thanks All. My particular thanks to Eric . . . again. Proud inlay was in my original plan. I became so obsessed with the time crunch that I failed to realize that I had gotten done so quickly that I had plenty of time to do this. 1 Quote
pkinneb Posted November 26, 2016 Report Posted November 26, 2016 Wow for a "quick Christmas gift" there is a lot going on there, thanks for sharing! Turned out great! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.