Nyles Posted December 5, 2016 Report Posted December 5, 2016 Just couldn't handle it any longer and had to take the plunge. A picture of my old stock miter gauge a picture of my new after market one... Quick setup question. When setting this up how close do I want the edge of the fence to the blade? The manual doesn't really specify a distance, only to give enough clearance? I am assuming as close as possible with making sure the blade while moving cant make any contact with the aluminum fence? This would be for a left miter slot setup if that matters... Thanks again! 1 Quote
Popular Post shaneymack Posted December 5, 2016 Popular Post Report Posted December 5, 2016 Remember that when you set it close to the blade at 90° that it will hit the blade when you angle it. Put it next to the blade and turn it to left and right to where it isnt hitting anywhere then lock it in. Then add a sacrificial fence to it. Now you will see your kerf, have zero clearance and never accidentally run it through the blade after you angle it. . Sent from my SM-N910W8 using Tapatalk 3 Quote
pkinneb Posted December 5, 2016 Report Posted December 5, 2016 Nice upgrade! I did the same thing mine will be here tomorrow 1 Quote
Nyles Posted December 5, 2016 Author Report Posted December 5, 2016 Thanks shaneymack! Had to step out of the shop for the evening but will check that out tomorrow. Super excited to use it asap! Quote
..Kev Posted December 5, 2016 Report Posted December 5, 2016 Great upgrade for sure! I love mine! Shane is correct about checking it at the blade before you make your cut! 1 Quote
Chet Posted December 5, 2016 Report Posted December 5, 2016 You will definitely like that model. 1 Quote
ben_r_ Posted December 5, 2016 Report Posted December 5, 2016 Nice! Excellent choice! I have the same one. 1 Quote
drzaius Posted December 5, 2016 Report Posted December 5, 2016 Ya, it's a beaut. I've got the same one & like it a lot. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.