MHRestorations Posted December 28, 2016 Report Posted December 28, 2016 I've had an M18 Driver Drill for nearly 2 years that just stopped working correctly. A fully charged battery would not start up the drill, but it would cause the LED light to come on when the trigger is pulled. After taking it apart, going through some trouble shooting, and putting it back together, I was back at square one. I purchased a refurbished Milwaukee M18 Red Lithium Hammer Drill but did not purchase any batteries due to my batteries working fine on my friend's drill (as of now I'm assuming my batteries are not the issue). Here is my current issue: The batteries, when fully charged, and put on the refurbished Hammer Drill do NOT cause anything to happen. No LED light, nothing. However, when I put the battery on my old M18, pull the trigger (the LED light comes on, nothing else happens) and immediately put the battery on the refurbished drill, it will work as it should. As long as I use the drill once every 4 minutes or so, I don't have to put the battery on the old drill and pull the trigger for the battery to start up the new drill. If it sits for longer than that, I have to start the process over. I hope I am explaining this clear enough. Please let me know if I need to clarify anything else. Thanks in advance! Quote
drzaius Posted December 28, 2016 Report Posted December 28, 2016 Sounds like a job for the Milwaukee service center. BTW, the warranty on those tools is 5 years, so why not take it in & let them have a look? Quote
Chet Posted December 28, 2016 Report Posted December 28, 2016 4 minutes ago, drzaius said: Sounds like a job for the Milwaukee service center. BTW, the warranty on those tools is 5 years, so why not take it in & let them have a look? Yup. Quote
BonPacific Posted December 28, 2016 Report Posted December 28, 2016 24 minutes ago, drzaius said: Sounds like a job for the Milwaukee service center. BTW, the warranty on those tools is 5 years, so why not take it in & let them have a look? 3 years on the batteries, but still within time. Quote
drzaius Posted December 28, 2016 Report Posted December 28, 2016 I even if the batteries were out of warranty, they can do diagnostics for you. Quote
Ronn W Posted December 28, 2016 Report Posted December 28, 2016 I like chords on my tools. AKA Knuckle Dragger Quote
MHRestorations Posted December 29, 2016 Author Report Posted December 29, 2016 7 hours ago, drzaius said: Sounds like a job for the Milwaukee service center. BTW, the warranty on those tools is 5 years, so why not take it in & let them have a look? I agree, unfortunately the nearest service center listed on their website is about a 3 hour drive for me. Thanks for the reminder on the warranty! That will be my next plan of attack. Quote
drzaius Posted December 29, 2016 Report Posted December 29, 2016 13 hours ago, MHRestorations said: I agree, unfortunately the nearest service center listed on their website is about a 3 hour drive for me. Thanks for the reminder on the warranty! That will be my next plan of attack. Ya, just last week I got my circ saw half way apart before I though to check the warranty. So it's off to the service center, which for me, is only 10 min away. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.