Seth Clayton Posted January 22, 2017 Report Posted January 22, 2017 I don't "need" a cnc setup by any means, but definitely *WANT* one. What're the ballpark startup costs to get up and running? I'd prefer a prefab kit of some sort, and would want to be able to put panels around 30"x24" into it. Sent from my iPhone using Tapatalk Quote
Woodenskye Posted January 22, 2017 Report Posted January 22, 2017 Seth, pricing for CNC can run from $1500 to $100,000 or more. For a hobbiest you will be somewhat limited in what you can do in terms of size and speed with lower priced machines. For Starters, the Xcarve is good, but if you want more robust, CNC Router Parts will give you a lot of information and kits. Frank Howarth just did a video of one he built and then the one he swapped with from CNC Router Parts. 1 Quote
TerryMcK Posted January 22, 2017 Report Posted January 22, 2017 Search for The Woodpecker on Youtube. Alain uses an Xcarve and has a few videos about it. Quote
AstroDave Posted January 23, 2017 Report Posted January 23, 2017 I can vouch for cncrouterparts... I have 4x8 system and it's great. Total all in cost was about 11 grand. However they make smaller units and without all the extras. Definitely check out their website. Sent from my SM-G930V using Tapatalk Quote
Tom Cancelleri Posted January 23, 2017 Report Posted January 23, 2017 I've been running an Xcarve 1000mm since September. I've cut more than 100 different items from plaques, to sides for boxes, large inlays, cutting boards. Some people say it's not overly reliable, but I beg to differ. For my needs in the shop it's adequate and then some. I just finished up an order for 45 6.5" x 10" plaques and running the machine for 7-9 hours a day for a few days in a row with no issues. The newest version for 2016 with the X-Controller is even more capable than the previous 2015 version. You can cut a piece 31"x31" on the 1000mm version. Will take 1/4" shank and 1/8" shank bits. I do recommend getting the precision machined collet for 1/8" bits. I've cut, wood, acrylic, aluminum, MDF, UHMW. Setup you're looking at around $1500 for the machine. I bought my bits from DrillBitsUnlimited. I get 1/32" upcut spiral bits, 1/16" and 1/8" for about $2.75 - $3.49 each. I cut my own clamps, made my own wasteboard, and such. 2 Quote
ben_r_ Posted January 23, 2017 Report Posted January 23, 2017 Or go with a pre-built and very tried and true unit like those from ShopBot. Quote
Elroy Skimms Posted January 24, 2017 Report Posted January 24, 2017 I did a "Build Your Own CNC" (https://buildyourcnc.com/) kit for a 5'x10' monster. Total cost was under $6,000 for everything including the computer and software to run it. However, I'm dealing with some flex issues that a lot of other users don't seem to have a problem with. Some people are able to cut 3/4" cabinet ply with a single pass but I have to take 2-3 passes, which really slows down the process. If I could do it again, I would stick with something with a more rigid aluminum frame. -E Quote
Mick S Posted January 26, 2017 Report Posted January 26, 2017 I would also suggest Fineline Automation- https://www.finelineautomation.com/products/saturn-series-2-x-4-cnc-router?taxon_id=54 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.