Recommended Posts

Posted

YES!! Another Kev build! This better work in my shop :) 

Questions already ... 

1) What Festool drill did you get?

2) What will the drawers actually hold in the back?

3) Is this just sitting on your counter over there or are you planning on hanging it somehow?

 

.... if you answered any of those in the video sorry, I had to watch on low volume at work haha.

  • Like 1
Posted
35 minutes ago, bushwacked said:

YES!! Another Kev build! This better work in my shop :) 

Questions already ... 

1) What Festool drill did you get?

2) What will the drawers actually hold in the back?

3) Is this just sitting on your counter over there or are you planning on hanging it somehow?

 

.... if you answered any of those in the video sorry, I had to watch on low volume at work haha.

1.  CXS

2.  Stay tuned, maybe nothing ;)

3.  It will sit on the counter but, would be super simple to hang as well.

  • Like 2
Posted
8 minutes ago, K Cooper said:

Kev, when you used the track saw, what did you use to support the off cut?

I used a couple of roller stands..

  • Like 1
Posted

Very cool!

 

More questions

 

1) do you enjoy clicking the dust collector power after each informative section. Some of those it looked like you did

 

2) maple face frame? Seems blasphemous after everything else got walnut.

 

3) are you using pre-finished ply on purpose or had it left over?

 

Keep up the great videos can't wait to see the final one. How long are you in town this time?

  • Like 1
Posted
2 hours ago, bushwacked said:

Very cool!

More questions emoji1.png

1) do you enjoy clicking the dust collector power after each informative section. Some of those it looked like you did emoji1.png

2) maple face frame? Seems blasphemous after everything else got walnut.

3) are you using pre-finished ply on purpose or had it left over?

Keep up the great videos emoji106.png can't wait to see the final one. How long are you in town this time?

Thanks!

1.  No, just a required evil at this point. 

2.  Yes, maple for the face frames.  Actually, everything else in the shop is maple FF with walnut accents.

3.  Prefinished ply because it's shop furniture and most everything else in the shop was done that way as well.

I'm actually back on the road for work now.  I've grabbed some project footage in Chet's shop that I'll put out after I get these out.  Some more fun/cool projects coming!  June and July could get really slow on the project front as that will be the busy time at work - no shop time.

  • Like 1
Posted
22 minutes ago, bushwacked said:

How much more $$ is your prefinished ply over .. say shop grade Maple? (if you have that option)

I don't have an option of "shop grade Maple" where I am.  The prefinished ply that I get is currently running about 55 bucks a sheet if that helps you put it in perspective.

 

Posted

I am somewhere around $55 also for prefinished and if it's  going in the shop the difference isn't enough to make me want to spend time slapping finish on shop cabinets.

Posted
1 minute ago, bushwacked said:

also is yalls prefinished ply china birch or non china birch?

No clue to be honest..  I'll check next time I'm there and let you know.

  • Like 1
Posted

Very nice! Maybe I missed it but just curious .. what do the dowels actually do?

 

Also was talking to a buddy. Is pre finished ply tough to transport and use without scratching the finish or as long as you are not banging it around it holds up decently well?

  • Like 1
Posted
15 minutes ago, bushwacked said:

Very nice! Maybe I missed it but just curious .. what do the dowels actually do?

 

Also was talking to a buddy. Is pre finished ply tough to transport and use without scratching the finish or as long as you are not banging it around it holds up decently well?

The dowels give a little support to the drill tray and add a little separation.  Other than that, they just look kind of cool.

As for the ply, it holds up ok..  They do get scratched from time to time but, ultimately hold up better than one would expect.  My issue is that I have to leave my tail gate open to transport them and they're super slick when stacked on top of each other.  I always have to tie them in. 

Posted
1 hour ago, TIODS said:

they're super slick

This is a nice feature when you are using them for the top on a miter station, your work slides easier.  Also the dried glue just pops of.

Drew,  I was at my local lumber yard this past Saturday and the price difference here was $11 for the finished vs. un-finished.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 54 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined