Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Antique varnish finish ?

Featured Replies

Seeking guidance on a pie safe that has been in the family about 100 years.  Whatever I tell you is coming from a relative amateur, so if I get it wrong, I apologize.  The cabinet appears to be poplar.  The shelves, top and bottom are each single 16" wide planks.  Seems to be in good shape except for the finish and the top. I would like clear up the finish. 

I believe the finish is varnish with some type of die (walnut) in the varnish.  It is incredibly thick, 1/16 to maybe 1/8".  It is checked like actual alligator skin.  I tried alcohol and with much effort managed to  level a small area.  It looks like thick, shiny plastic.  With enough alcohol I can remove the finish and the underlying wood has no stain.  All the interior surfaces are raw and have never been finished.  That includes the top, which is only finished on the edges and the overhang. 

I have never seen this before, is it common?    Any suggestions?  Thanks. 

 

Given the age, and the fact that it can dissolve in alcohol, my money is on shellac as the finish. If applied very thick, it is not unusual to see it crack like a dry lake bed. I don't know about what colorant may have been added, but the lack of finish in "unseen" areas is common.

 

Are you looking to completely refinish, or just refresh certain areas?

Shelllac comes in different grades and colors. The lightest colors are the most costly. Some of the darkest can be much cheaper and contain impurities . Shellac is made from insects molted shells. You buy it by the pound in flake or granule form and dissolve it in alcohol. You can use an alcohol soaked rag and a putty knife to remove the old finish. Fumes and flammability are dangers that need to be addressed . You can spray or brush the new finish on. 

Old shellac finishes can darken with age and dirt between layers over the years.

  • Author

I hate to say refinish, it sounds like a lot of work, but I think it all needs to be uniform.  So that would be all of the exterior.  The back sides and doors are frame and panel.  I foresee it being a mess getting it all off.  

I imagine it could be shellac and some of the darkening could be natural.  I just didn't think shellac could be put on that thick.  When I have used it, it was barely noticeable.   

It sounds like the kind of finish that a lot of old pianos have.  We have a couple of old pie safes that were refinished back to natural wood decades ago by my Grandmother (died in 1969)   Sorry, I don't have any suggestions about how to save the finish you have, but it wouldn't be sacrilege to strip it and redo it on a pie safe. 

  • Author

Saving the finish is not a high priority.  I am more interested in the easy way out.  I imagine a gallon or more of alcohol and a shovel to get it all off.  The back is maybe six horizontal framed panels.  This is going to take a while.  

I am not crazy about plain poplar.  Any suggestions on finishing?  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.