Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Can anyone help?

Featured Replies

Hi everyone and thanks in advance for any feedback.

 

The project in question is a covered patio beam. The beam is going to be wrapped in maple veneer plywood. The goal is to keep the color as natural/white as possible with no color enhancement.

 

I intended to use Sherwood CAB acrylic lacquer Dull rubbed finish with a vinyl non catalyzed sealer as a base. I may forgo the vinyl sealer if it's not needed.

 

The question is that is this system ok for this application. The wood will not see rain, only the outdoor ambient humidity. I live in the northeast so it will go through all four seasons of temperates and humidity but will not be directly exposed.

If there is a better water-white sealer for this application please let me know.

 

Thanks!

Josh

 

I have no idea if it's the fight finish.But I find it's always a good idea to use a sealer with water based finish.You can use the finish as a sealer but it will not power out like a sealer.Sanding the first coat or two helps to build a nice base.

Aj

That's a solvent based lacquer. You must use Sherwood vinyl sealer with it. The finish is rated for interior use only. I'm thinking the heat, humidity and cold won't be kind to it over the years.

General Finishes exterior 450 is water white.  

  • Author

I was considering the general finishes 450. I'm not very familiar with it though. Does that need a primer/sealer?

 

The maple plywood is not exterior grade. I know the CAB acrylic is interior rated but I'm assuming this is because the sealer is brittle and can't withstand expansion and contraction from the increase in MC due to RH.

With that said, I'm thinking because it's a plywood and there is about 1/10th the movement compared to typical lumber the sealer may be ok in this application. 

 

Of course this theory could be flawed. Lol

your ply will delaminate.  guaranteed 

It would be interesting to see how long interior grade plywood last outside.Sometimes i pile up scraps out in the weather and they  puff up when they get wet.  I agree with Mike eventually it will delaminate.

General makes very good finish always follow their instructions they know their stuff!

Aj

40 minutes ago, Aj3 said:

It would be interesting to see how long interior grade plywood last outside.Sometimes i pile up scraps out in the weather and they  puff up when they get wet.

I've been performing a little experiment (sounds better than just being lazy) over the last year. I ordered one more sheet of OSB (cheap 7/16th) than I needed when redo'ing my shop, and have left it leaning against a fence in the weeds. One year in and its grey, but hasn't buckled or flaked apart yet. Compared to a chunk of Home Center Oak Ply which started falling apart in about a week.

  • Author

I Agree. Exposed to rain it pretty much gets demolished immediately. I've also had large unsealed scrapes laying around a unheated gargage for 10 years and they look no different than the day they were purchased. I guess there's a little more protection in a garage as opposed to a covered patio but I can't imagine much more. 

I guess there is only one way to truely find out. Lol

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.