Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Warning for others and a problem to fix

Featured Replies

I applied the first caot of shellac (brush) to a box that is made of several species (inlay in a interwoven pattern).  The shellac appears to have pickup up color from the paduk and spread it onto the adjacent wood.  Most obvious on the maple.

1) How could I have avoided this?  Sprayed the first coat? Rubbed some acetone of the paduk first?

2) How do I fix it.  Seems like th only possible solution is to sand it down and go to step 1.?????

Help please.

Yeah spray or use anything that's not alcohol-based.  The alcohol is why the color leached out.

Sand or scrape & start over. Hopefully I'd didn't soak in very far, maple isn't prone to that.

Thats good info to know. Spraying thin coats might not do it because shellac dries so fast especially when sprayed.

  • Author

I really want to use shellac for this project so I grabbed a piece of maple and a piece of paduk and duplicated my mistake - the maple got all pink-ish.  I let it dry and then sanded with 150 grit.  I had to basically remove all the shellac but the maple did return to its original color (or very close). 

So it appears that most of the paduk color remained in the varnish and did not get absorbed into the maple.  Could have been worse with an open grained wood. Off to Home Depot for some spray shellac for the new first coat on my box.  I plan to go back to brushing after a spray coat but I will test it first. I'll post pics when it is done.

Lesson: Test your finishes and be especially carefull with oily exotics.  Multiple species side by side can create problems that would never occur in a typical project.  Thankfully my veneer was 1/16" thick so the sanding didn't bust through.

3 minutes ago, wdwerker said:

Thats good info to know. Spraying thin coats might not do it because shellac dries so fast especially when sprayed.

could you expand on that.....Why it might not work?

Mis typed that !  Spraying thin coats will dry so fast little chance of color migration. Brushing dies slower and the brush can pull any color from one wood to the next. 

  • Author

I will add a precaution for spraying,  Your first coats(s) in this situation need to very thin or the colot will migrate. When I sprayed the first end of the box after sanding this happened (Have to re-sand again.)  But, for the other end I set the piece so the end was up (flat) and kept the coat thin - no migration.

If very project is a learning experience........I should get a degree for this box.

I have also gotten this from not spraying down the work piece with compressed air before final finishing. Padeuk has long open pores that kindly grab an hide the thin dust while sanding. That dust will get picked up by your tag or brush while finishing. A quick blast with air is a cheap insurance policy

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.