Popular Post Ronn W Posted October 29, 2017 Popular Post Report Posted October 29, 2017 I got this woould from Richard A when I was in TN. Here's what I did with it. Thanks Rick. I resawed part of the wood to amke veneer for the 4 sides. Mitered the corners with splines. Top is solid. Walnut trim, 1/8" plywood bottom and shellac finish. Used my home made shooting board for the first time to true up all the miters for the trim. (Something new every project) Unsofisticated veneer gluing. Veneered pieces. Slot for the bottom. Sorry that I did not take a pick of my miter sled. Used the tape trick to fold the sides into a box and inserted the splines last. Rabbet arounf the top of the sides and trim hold lid in place. There is also trim under the top on the "open end". 9 1 Quote
wtnhighlander Posted October 29, 2017 Report Posted October 29, 2017 Those flames belong on tbe side of a drag racer! Really cool! Quote
RichardA Posted October 30, 2017 Report Posted October 30, 2017 You're welcome. Now that's a hot box. 2 Quote
treeslayer Posted October 30, 2017 Report Posted October 30, 2017 Flame On Ronn, very nice and time spent with that old man Rick isn't bad either Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.