Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Harvesting white pine

Featured Replies

Hi,
I have a couple of tall, very straight, pretty large fairly large pine trees that I am thinking of having taken down.  They shade the house too much and are also present broken branch dangers in heavy wet New England snow.  I look at those beautifu straight trunks and think, man, that would make some nice lumber.   Then again it's just pine.   I haven't investigated how much it would be to have these dropped and sawn into boards or flitches.  Is it even worth investigating?  I suspect that for what it would cost to process these 3 or 4 trees I could buy a lot of white pine.....bur thoxe trunks are so tall and pretty, and straight....

Any thoughts?  anyone ever do anything like this?

George

IMG_0051.JPG

IMG_0053.JPG

IMG_0055.JPG

If you are taking them down anyway, you can subtract that price from the cost. A few years ago I had a couple of walnut trees milled and it cost me $100 per hour for the labor and 2.5 years anxiously watching them dry. It was well worth it but it’s walnut;)! 

We have a few acres of woodland here and last year had a load of trees cut down. I concluded it was best just to sell the lumber (a mix of pine and birch) and buy the wood I need as I need it, rather than trying to do anything with the wood myself. I kept a couple of small bits of birch just so I can make something using wood from my own trees, but basically concluded it is not worth the effort and is an expensive way to get wood.

Unless these trees have symbolic value it is probably not worth it to try to have them milled. Pine is not worth much and residential trees have increased chance of a nail being in there somewhere. A saw mill hitting a nail is not much better than your table saw hitting a nail. 

The standard mill rate around me is 125 an hour  and 150, one time setup and blade charge if they bring the mill to you. Is it worth it is a you question. I happen to enjoy using wood from trees I've milled. It presents some unique problems and has its up sides. I'm currently working on a hanging cabinet make all from bookmatched panels of walnut I cut a few Summers ago. 

Even if you don't get them milled now, but think you may want the lumber some day, I would still save the trunks somewhere out of the way. In the future, you may find a buddy with a chainsaw mill and you can get a few cool slabs from one.

  • Popular Post

None really large enough to get excited over.  The second one is going to have stress in it, and the last one looks like it would be mostly all twisted grain.  Simplest to pay someone to take them down, if you really have to, and buy what lumber you need.

We had 150 acres of timber thinned this Spring.  We also have a three acre point on the lake adjoining the timberland, but you have to go under a low power line to get down to the point.  The timber crew that did the thinning would have had to set their loader up down on the point, but it wouldn't go under the powerline.  The point has some nice, large hardwoods, and had about 50 large Pine trees on it.  The Pine trees were mature enough that the ground was covered with seedlings every year, so I wanted to leave the best hardwoods, and get rid of all the Pines.  The large timber outfit didn't want to get those Pines even if I gave them to them.

Long story short, I finally found someone to give the Pine trees to, who would come get them.  They piled the laps (limbs and other leftover scraps) in burning piles for me.  I'll let them dry out, and burn them when we get a good snow.  In a few years, it will be mostly only nice White Oak trees on the point.

That was probably ten truckloads (single rear axle) of nice logs that I had to give away.  No one will come after 3 average sized trees just for the logs.

Here's a sunset panorama off the end of our point.  It's really not as closed in as it looks, since this is a combination of multiple pictures covering about 180 degrees.  All those trees have grown a lot since I took that picture.

sunset_pan_4.JPG

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.