Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Danger working by furnace or water heater?

Featured Replies

Hello,

 

So my workshop is in my garage. I do a lot of sanding and some staining and finishing. In the garage is the furnace and water heater. Is it dangerous to be sanding near this appliances?

 

Nic

I'm not going to tell you it's ok!

My workshop is in my basement near the furnace and hotwater heater. I'm very anal in keeping my area clean and blown out with compressed air around the hot water heater. In addition, I keep my gas furnace clean and blown out with compressed air.  If I'm doing dusty operations, I flip the switch off on the furnace so not to pull dust into the furnace and through the house.

That's what I do. Be smart and keep your shop clean. 

 

-Ace-

 

  • Author
4 minutes ago, AceHoleInOne said:

I'm not going to tell you it's ok!

My workshop is in my basement near the furnace and hotwater heater. I'm very anal in keeping my area clean and blown out with compressed air around the hot water heater. In addition, I keep my gas furnace clean and blown out with compressed air.  If I'm doing dusty operations, I flip the switch off on the furnace so not to pull dust into the furnace and through the house.

That's what I do. Be smart and keep your shop clean. 

 

-Ace-

 

Thank you, after almost every time I do any sanding I will blow off both the hot water heater and the furnace. 

4 minutes ago, NIC said:

Thank you, after almost every time I do any sanding I will blow off both the hot water heater and the furnace. 

With regards to the furnace, In addition to what you do, I will pull the panel and blow out around the burners. Dust can lay flat and collect. Doing more is better. The hot-water heater around the burner, I do the same. Not sure if you have a pilot light? You may have to re-light.

 

-Ace-

  • Author
10 minutes ago, AceHoleInOne said:

With regards to the furnace, In addition to what you do, I will pull the panel and blow out around the burners. Dust can lay flat and collect. Doing more is better. The hot-water heater around the burner, I do the same. Not sure if you have a pilot light? You may have to re-light.

 

-Ace-

Okay not sure how to do that. Where is the burner on the furnace? 

I don't know. Get your furnace manual out. Should show you that. Or call a heating and cooling professional. ;)

 

-Ace-

  • Author
21 minutes ago, AceHoleInOne said:

 

 

Do you have an air filter system? Is that something that would be helpful? 

Nic I've done a lot of woodworking in close proximity to my furnace and water warmer. Be diligent at keeping the dust away. Fumes are less of a worry. If your getting concentrations of those enough to be dangerous you'll die from the fumes before the fire probably.

Do you appliances have sealed combustion chambers? If so it's even less of a worry.

Removing as much dust from the space via dust collector or air filter as possible will always help.

  • Author
30 minutes ago, Chestnut said:

Nic I've done a lot of woodworking in close proximity to my furnace and water warmer. Be diligent at keeping the dust away. Fumes are less of a worry. If your getting concentrations of those enough to be dangerous you'll die from the fumes before the fire probably.

Do you appliances have sealed combustion chambers? If so it's even less of a worry.

Removing as much dust from the space via dust collector or air filter as possible will always help.

Not sure on the sealed combustion chambers. How do I know if it does? 

If your furnace has 2 pvc pipes running to it that's a good indicator. For the water heater my burner is literally behind glass, i light the pilot with a built in ignitor. Otherwise google the model and year.

 

9 hours ago, Chestnut said:

Nic I've done a lot of woodworking in close proximity to my furnace and water warmer. Be diligent at keeping the dust away. Fumes are less of a worry. If your getting concentrations of those enough to be dangerous you'll die from the fumes before the fire probably.

Do you appliances have sealed combustion chambers? If so it's even less of a worry.

Removing as much dust from the space via dust collector or air filter as possible will always help.

I will echo this. My shop is in the garage, along with the furnace and water heater. My water heater has a sealed combustion chamber, furnace does not. I vacuum the dust off the furnace regularly. 

 

I am not concerned with airborne particles. From my understanding, you wouldn’t be able to breathe if you created a dust cloud thick enough to ignite.

Nic, like Matt said, I don’t think you can intentionally create enough wood dust to cause an explosion problem without being overcome and as others have said, settled dust might be a bigger concern. In all fairness, it might be a good idea to get a hvac guy to come out and have a look see and to also familiarize you with you furnace. As it wasn’t mentioned in your post, I’m assuming you do not have a dust collection system. One, if only minimal, will be a good investment.

On 11/2/2017 at 10:36 AM, NIC said:

Okay not sure how to do that. Where is the burner on the furnace? 

On 11/2/2017 at 9:16 PM, K Cooper said:

In all fairness, it might be a good idea to get a hvac guy to come out and have a look see and to also familiarize you with you furnace.

If you are unsure on how to clean out the burners, then you should definitely have an HVAC guy come out and show you what to clean out. 

If it possible, comider enclosing the water heater and furnace in their own closets.  Use large furnace filters on the vents you will install on the closet to keep the dust out, but still allow adequate air movement. 

I'd recommend setting up a regular service contract with your HVAC service company, so they come out and do annual cleanings and inspections.  The service I've used before applied the cost of the yearly fee to any repairs you might encounter outside of the regular service calls.   In doing so, they should be more than willing to help you plan an enclosure for the burners, as it will be very difficult for us on the net to do it safely for you.  The fire and monoxide risk to is too great.  

 

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.