Mick S Posted June 7, 2018 Report Posted June 7, 2018 Had a couple of hours to play around with our CNC router this morning to do some carving and inlay on the side panels for the Morris chair I'm finishing up. Mesquite with turquoise inlay. 1/16" diameter end mill for the inlay, 1/4" ball nose for the carving using Aspire. Quote
pkinneb Posted June 7, 2018 Report Posted June 7, 2018 32 minutes ago, Mick S said: Had a couple of hours to play around with our CNC router this morning to do some carving and inlay on the side panels for the Morris chair I'm finishing up. Mesquite with turquoise inlay. 1/16" diameter end mill for the inlay, 1/4" ball nose for the carving using Aspire. That is really cool Mick! Great use of new and old technology as well as multiple materials in the same project. 1 Quote
Chet Posted June 7, 2018 Report Posted June 7, 2018 Pretty cool and it adds a different touch to the Morris chair design. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.