Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Need help with my music box

Featured Replies

Hi Everyone, I'm new here so forgive me if this is covered somewhere and I just haven't found it.  Also new to inlay which I am doing with a small music box.  The wood is simple pine (I think) and I carved out stars on each side.  I then mixed blue glow in the dark powder with epoxy and filled the star cavities.  Have sanded down the dry glow epoxy to be level with the surface. But I'm at a stuck place now and hoping someone might have some suggestions.

I would like to stain the box so it is a darker color, I think it would cause the glow stars to pop out a little more.  But will the stain dull/cover my filled in stars?  

 

Also I would like to add a small amount of glow in the dark glitter (that preferably glows white or really light blue) onto the music box, so it kind of looks like tiny stars.  Do I do this step after I've stained the box and add some of the glitter to a final epoxy coat?  

 

Not sure the order in which to do this so the glow is still vibrant, despite the stain.  I've attached some photos of the project; again, it is my first run at this so it lacks professional quality.  But I want to give it to a star-gazing, sky loving friend of mine.

 

Oh, also the top of the little box has a window in which I found a silver (blue) glowing crescent moon to put into that window.  What would be the best way to keep the mood "stuck" in the window in one spot?  The little window has a think pine wood backing so that is what the crescent moon will be mounted on. You'll see in the photo that I've already stained that backing.

 

Thanks in advance for any and all input.  This has been a looooong project but I'm getting excited as I see it coming together finally.  It's far from perfect but that will be part of its charm, yes? :)

 

Take care to all and hope to hear back soon!

Smont

 

2018-06-21 13.34.25.jpg

2018-06-21 13.34.33.jpg

2018-06-21 13.34.38.jpg

2018-06-21 13.34.42.jpg

2018-06-21 13.34.48.jpg

2018-06-21_13_35_04.jpg

2018-06-21 13.35.51.jpg

I think you could mask off the stars with blue tape and then apply a wiped-on stain or dye, then put a finish over the top of it all. You could try putting a little glitter in the first coat of top coat, but no guarantees that will work well. 

Another option for your "tiny stars" might be to clip off short (!) sections of brad nail and epoxy them into shallowly-drilled holes.

Masking off the stars before staining is a good idea. Cover each star with masking tape then trim the tape with an xacto knife . You might try adding the glitter on top of the first coat of finish while it is wet, then a second coat to protect the glitter. I would practice this on some scrap before you try it on your box.

Experiementl experiment.  do as many sample (practice pieces as you need to satisfy yourself.

A good practice to apply to all of your future projects is to plane & sand the scraps just as you prepare the actual parts. Then start with practicing any inlays, stains and finishes on your scraps. Keep notes on what grit sanding, stain and how many coats of finish especially if you are trying different combinations.  Then you can use a proven path to finish the actual project.  I keep favorite samples to follow on future jobs. More extensive notes come in real handy years later when trying to duplicate the same results. Brand & color names, grits etc.

Even poor results samples are good examples of what not to do. Skipping from 80 grit to 220 grit shows up after you stain as tons of scratches that are difficult to remove.

  • Author
  • Popular Post

Thank you, everyone, for your kind suggestions.  I was doing a practice run on a scrap piece of wood but I was just curious for tips from more seasoned artists!  If you have any more ideas I'd love to hear them.  I appreciate the feedback I did get.  Thanks again, and you're right Practice Practice Practice! My hands are just so shaky it was really hard to do the carving part.  I just used a small dremel  bit and then tried to clean up the stars with a carving tool.  Still difficult.

 

 

I bet your friend will be as excited to receive this box as you are in making and giving it. Well done bud! Be sure and post a pic of the finished product. And welcome to the forum. Looking forward to more of your projects. Also, if you haven’t completed the top yet, a dab of hot glue will keep the moon in place. And as @wdwerker will tell you, sign and date it. And being a music box, what will be the music? 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.