Tom King Posted October 5, 2018 Report Posted October 5, 2018 We've have a room to finish, when we have some fill-in time to kill. The owner won't be back until probably next Easter, so no hurry. With the high heat yesterday, and today, we decided to work in air conditioning, and go spray the paint. The ceiling, sheetrock walls, and trim have been finished for a good while, and my airless sprayer has been sitting in there waiting for us. The owner said to just semi-gloss white the whole room, so there wouldn't be so much time cutting in different colors. Three sides of the 16 x 24 foot room, with cathedral ceiling, are covered by windows, so there would have been a LOT of cutting in. I decided to use Sherwin Williams Pro Classic, since it's probably the best paint available at our non-pro SW store. I laid out several extensions, so I wouldn't have to use a ladder. The guys had blown out the extensions with compressed air before they brought them in the room, but they've been laying there for several weeks, and we didn't check. Some insect was in one of the extensions, and I got a major clog, which blew slobbers all over the wall above a window, as well as on the casing. The room was zipped up, and I was using supplied air, so didn't want to stop for long. The only brushes in there were some cheap chip brushes that we use to clean off runs of paint down the sides of paint cans from pouring. I brushed out the slobbers, but it left LARGE streaks from the cheap brush. I knew we'd have to go back later, and sand that part out to respray. I was anxious to see how bad it was this morning, so we rode back over there to check. I had planned a different days work today, but wanted to see how bad it was, so I could think about it. There was absolutely no sign of any defect!!! It had completely self-leveled, and we won't have to do anything to it! You can't even tell that a brush had ever hit it! This was my first time using the newest low pressure tips, since it's been a few years since we did any painting. I used a Graco 310 FFLP tip to hit the window extensions, and casing, and a 614 FFLP tip for the walls. It looks like an automotive finish, or at least as good as the IKEA white stuff. I might put one more coat on it, but it looks awfully good for one coat on top of SW Premium Wall and Wood Primer. 1 Quote
wdwerker Posted October 5, 2018 Report Posted October 5, 2018 Careful prep and primer contribute greatly to a quality finish. The ML Campbell finishes I spray are made by the same parent company. Glad to hear it turned out so well. I think the majority of the paint and finish brands are owned by about 3 big conglomerates. Quote
Jfitz Posted October 6, 2018 Report Posted October 6, 2018 Nice! I continue to hear good things about SW stuff.... Quote
Tom King Posted October 6, 2018 Author Report Posted October 6, 2018 The thing that amazed me the most was the self-leveling of those heavy brush streaks. Quote
AceHoleInOne Posted October 6, 2018 Report Posted October 6, 2018 That is the beauty of the water-based finishes. -Ace- Quote
wdwerker Posted October 6, 2018 Report Posted October 6, 2018 When I spray Agualente any “orange peel” gradually self levels. It’s a fairly recent improvement in their formula. “Better Living Through Chemistry “ always loved the phrase, recently found out it’s an old “DuPont” ad tagline. Quote
Coop Posted October 7, 2018 Report Posted October 7, 2018 We just had our kitchen cabinets refinished with ProClassic and it a beautiful finish. Someone mentioned an auto finish and I agree. However, we were displaced for 3 days and my wife for an additional 3 days due to the smell. The painters left the remainIing paint and I did some baseboards with it via brush and the odor dissipated within hours. If you can put up with the odor, it’s the best paint on the market, IMO. 1 Quote
Chip Sawdust Posted November 2, 2018 Report Posted November 2, 2018 We have a little SW shop here and I have had really good service from them. I usually had been buying my stains and finishes from HD or Ace or Amazon, but these guys actually KNOW what each product is like, what it can and can’t do, and other info I may not know to ask. I’m no Flexner! Their prices are competitive and even if they were a bit higher, the knowledge of the people who work there is worth the extra. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.