Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Rockwell Delta 10" almost new but old

Featured Replies

Hi

I "inherited" a 10" Rockwell Delta table saw, 220v and has very very little use on it.

I have a ranch in Wyoming and need to start rebuilding cabins so need a table saw. Is this saw worth putting a good miter on it and proper vacuum attachment with saw guard? 

Or should I sell and get a new one?  I am on a budget so cannot afford a very nice one. 

 

Thanks 

Jock

It should be fine.   I'm using one very similar.  It wasn't made for dust collection, but it is possible.  Here's a picture of mine.

post-14184-0-89380200-1387045541_thumb.jpg

I bought one and rehabbed it. Amazing saw. If you've got the saw, spend a bit of time cleaning it up, tube it up, Then spend your money on a fence and good blades if you must. Dont bother trying to find a better saw for a better price. There isn't one. Those things will run forever when maintained.

  • Author
17 minutes ago, Tom King said:

It should be fine.   I'm using one very similar.  It wasn't made for dust collection, but it is possible.  Here's a picture of mine.

thanks for the responses, mine is a 10" Unisaw and similar to yours, will clean it up and get it going

 

 

That fence will fetch a penny too if you choose to upgrade. ( W which I would, but I'm in the minority I've found)

Wow that's a nice looking saw. Consider yourself lucky to have inherited such a nice tool.

13 hours ago, Brendon_t said:

That fence will fetch a penny too if you choose to upgrade. ( W which I would, but I'm in the minority I've found)

I'll add on as I have experience with that fence.  It can be fussy and require double checking much of the time depending on the amount of use it has had.  It has a wear issue over time but, try it out before you just throw money at it.  It could be fine.  If it will not consistently lock down true to the blade you can have a kickback hazard.

I had plenty of experience with the original fence like yours too. If you double check each time it is functional but fussy. I replaced mine with a Vega aftermarket fence. If it was my project I would clean and adjust the saw first. There are 4 bolts on the outside corners that allow you to remove or adjust the cast iron top. Makes for easy access to change belts & clean & lube inside the saw. The top needs to be adjusted parallel to the blade, spend time to get that very exact. Use the saw with the old fence and consider replacing the fence when the budget allows. 

The Unisaw is a fine saw. I restored mine this summer.

20180904_194920.thumb.jpg.17e05b6192ed013571a232e70ae90f97.jpg

 

As mentioned above, the fence can be a bit to get used to. A lot of the time the problem with them not locking square is because of a worn rubber bushing inside the locking mechanism. That and if they aren't adjusted properly with regard to how the rear hook clamps the rail. Always leave the fence unclamped when you are done using it. The bushings take a set when they are left locked up. If I run across a deal on a used US made Bies or the like, I will consider changing the fence, but it serves me well as-is.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.