Recommended Posts

Posted

Have a Elu plunge router( made by Black  & Decker ) model 3338. While attempting to rout by hand the motor stalled and quit. I think the problem is in the switch. I need to know if I can bypass the switch by hooking power directly to the black and white wires on the switch. The on switch is activated by pulling up on the lever which all I can see is that it lifts up the switch assembly a little on one corner with no mechanical connection that I can see. It is a single pole double throw switch and the contacts are made. Trying to get info from Black and Decker is not easy.

Posted

Why would you want to bypass the switch.  How would you safely power it on and off that way?  Is there some place on the body were you could drill the appropriate hole for a simple toggle switch that you can operate will holding the router safely?

Posted

If you’re just wanting to diagnose the issue, set your multimeter to check for continuity across the wires. If engaging the switch closes the circuit, it’s not a faulty switch. Depending on the wiring, you might have to try a couple times to get the right wires/pins. 
No need to play with live power to diagnose the switch. 

Posted

What you describe sounds like a bad mechanism for activating the switch, not necessarily a bad switch. I would ONLY consider bypassing the switch for testing purposes, with no bit installed. Attempting to operate the machine without a proper switch is an invitation for injury.

That said, I can't comment on what wires to manipulate, as I have no diagram for that machine. In that situation, I would use an ohmmeter to determine which wires are connected to what components, and draw the diagram before proceding further.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 37 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined