Woodworking_Hobby Posted April 18, 2021 Report Posted April 18, 2021 I have not used hand planes too much in the past but I have been trying to use them in my work. I inherited a wood river block plane and wood river 4.5 smoothing plane, any recommendations on resources for how to tune them up and get them ready for use and best ways to use them? Also the block plane has an adjustable mouth and was looking for any advice on how you set the opening based on what you are doing with the plane. Quote
wtnhighlander Posted April 18, 2021 Report Posted April 18, 2021 Marc has a recent video about tuning up a block plane: 1 1 Quote
Woodworking_Hobby Posted April 18, 2021 Author Report Posted April 18, 2021 3 minutes ago, wtnhighlander said: Marc has a recent video about tuning up a block plane: Ha...should have looked their first...thanks for the post! 1 Quote
Chet Posted April 18, 2021 Report Posted April 18, 2021 The most recent issue of Fine Woodworking Magazine has an article on this very subject. 1 Quote
pkinneb Posted April 18, 2021 Report Posted April 18, 2021 Also check out Rob Cosman on YouTube. While his video's can get a little long winded (he doesn't edit them down, or least didn't) I pretty much learned how to sharpen, tune, and use hand planes exclusively from his video's. I actually belonged to his paid service early on but once I felt comfortable with planes they were a little long for my liking so now just follow the free site. 2 Quote
Mark J Posted April 19, 2021 Report Posted April 19, 2021 Christopher Schwarz has written at least one book on hand planes. My public library actually has it. 1 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.