Beechwood Chip Posted September 12, 2025 Report Posted September 12, 2025 On 9/12/2025 at 10:01 AM, Mark J said: @gee-dub, just for my curiosity, the bungees cord ends look like they wrap around and secure on the bottom side of the sled. If that's true, how does the sled sit flat on the planer bed? I think the bungee cord is attached to dowels on the top of the sled. 1 Quote
Popular Post gee-dub Posted September 12, 2025 Popular Post Report Posted September 12, 2025 Correct. There is a dowel driven through the upper and lower beds at each end and the bungee stretches mildly between them. The purpose is to retain the cleats in position while you load or unload the material. There is a screw-hook between each cleat position as well. This just provides a bit of downward pressure on the cleats. It is a very simple system that has worked well for nearly 2 decades so I guess it works OK 2 1 Quote
gee-dub Posted September 12, 2025 Report Posted September 12, 2025 On 9/12/2025 at 7:01 AM, Mark J said: Interesting, I just realized the sled is a torsion box. I think that would be stiffer than MDF. @gee-dub, just for my curiosity, the bungees cord ends look like they wrap around and secure on the bottom side of the sled. If that's true, how does the sled sit flat on the planer bed? Correct. MDF has no grain and therefor no linear stability to speak of. It does have thickness consistency so if that is what you are after you are good to go. To create a flat surface similar to that provided by a jointer you need rigidity; ergo torsion box and plywood 2 Quote
Woodworking_Hobby Posted September 12, 2025 Author Report Posted September 12, 2025 1 hour ago, Ron Swanson Jr. said: @gee-dub i would love that plan! I think the plans are still available in one of the posts at the start of this thread. I downloaded them again this morning and they seemed to work. 1 Quote
Woodworking_Hobby Posted September 12, 2025 Author Report Posted September 12, 2025 3 hours ago, gee-dub said: I know I keep pushing this agenda but the 4 hours you will spend making a decent adjustable planer sled will pay you back for years and years. Do as you will. I have the original plans if you would like them. This is definitely on my to do list for shop projects! I am still glad I made this (working on ) this table built buy it has shown me at this point I really enjoy making smaller things! Boxes, small tables, cutting boards, etc. With my current skill level, tools, and jigs the parts that are this long start to get a little unruly and it is much harder to get them squared up and flat without any bowing. 1 Quote
BillyJack Posted September 12, 2025 Report Posted September 12, 2025 What is the need for this sled? Quote
Ron Swanson Jr. Posted September 12, 2025 Report Posted September 12, 2025 On 9/12/2025 at 12:03 PM, BillyJack said: What is the need for this sled? Removing twist and cupping with a planer, reducing snipe, etc. Quote
BillyJack Posted September 12, 2025 Report Posted September 12, 2025 Why not use straight flat wood? 1 Quote
Ron Swanson Jr. Posted September 12, 2025 Report Posted September 12, 2025 On 9/12/2025 at 1:32 PM, BillyJack said: Why not use straight flat wood? Because not all wood is straight and flat. Or stays straight and flat over time. So in the event you have wood that's neither of those, it's good to have options. Quote
BillyJack Posted September 12, 2025 Report Posted September 12, 2025 The key word is stay flat. Last time I worked with twisted wood was the 80’s. The shop I worked for bought everything in the rough and was bought 1000-2000 feet at a time.At that time we weren’t buying common woods in the rough, just the uncommon. Now if we had a project that took 300 ft of walnut, everything got ran through the planer. Now fast forward. How do you have a twisted piece of lumber? Quote
Ron Swanson Jr. Posted September 12, 2025 Report Posted September 12, 2025 On 9/12/2025 at 1:51 PM, BillyJack said: Now fast forward. How do you have a twisted piece of lumber? Im betting a man of your experience understands full well the predictable ways that wood moves. 1 1 Quote
BillyJack Posted September 12, 2025 Report Posted September 12, 2025 I understand it, but even back in the day we didn’t use sleds. Let’s say I have. a 10’ board I want to use for drawer fronts and I want the grain to match. Now there’s. a 50/50 chance It will pull out when I screw it to the drawer box, but not guaranteed. I will lock one side down, a stop on the other end and belt sand that twist out on the one side. Now put the sanded side down and run thru the planer. Quote
Ron Swanson Jr. Posted September 12, 2025 Report Posted September 12, 2025 On 9/12/2025 at 2:00 PM, BillyJack said: I understand it, but even back in the day we didn’t use sleds. Let’s say I have. a 10’ board I want to use for drawer fronts and I want the grain to match. Now there’s. a 50/50 chance It will pull out when I screw it to the drawer box, but not guaranteed. I will lock one side down, a stop on the other end and belt sand that twist out on the one side. Now put the sanded side down and run thru the planer. Different path, same destination. Carry on, sir! 2 Quote
Coop Posted September 13, 2025 Report Posted September 13, 2025 My hw dealer saves all of his twisted boards for me and I get a huge discount. 1 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.