legenddc Posted November 20, 2025 Report Posted November 20, 2025 Interesting to see everyone's thoughts. I'm having some issues with my Ridgid planer and was thinking about upgrading to the Dewalt 735. Naturally I started thinking of adding a helical head too but the price puts it awfully close to a lot of these new benchtop helical ones like this Grizzly. 1 Quote
Popular Post gee-dub Posted November 20, 2025 Popular Post Report Posted November 20, 2025 The Grizzly G0453Z is on sale right now. It is an order of magnitude more money than you are talking about but, how long will you use it? I bought mine in 2010. I have used it for 25 years and am only just now on the last edge of the four sided inserts. Divide the "price" by the number of months you plan to use the tool and you will get an idea of what the "cost" is. Remember that I have never purchased or sharpened knives over the last 25 years. 3 Quote
legenddc Posted November 20, 2025 Report Posted November 20, 2025 On 11/20/2025 at 1:06 PM, gee-dub said: The Grizzly G0453Z is on sale right now. It is an order of magnitude more money than you are talking about but, how long will you use it? I bought mine in 2010. I have used it for 25 years and am only just now on the last edge of the four sided inserts. Divide the "price" by the number of months you plan to use the tool and you will get an idea of what the "cost" is. Remember that I have never purchased or sharpened knives over the last 25 years. Sadly 220v tools are out at the moment. They require a new electrical panel as ours is full and lacks a main breaker so no one will install a sub-panel. 1 Quote
Tpt life Posted November 20, 2025 Report Posted November 20, 2025 Should that say 2001? Struggling to make the math work. @gee-dub 1 1 Quote
Popular Post gee-dub Posted November 20, 2025 Popular Post Report Posted November 20, 2025 On 11/20/2025 at 2:05 PM, Tpt life said: Should that say 2001? Struggling to make the math work. @gee-dub You are correct sir; thank you! Bad math on my part. It was 2010 and has NOT been 25 years . . . so embarrassing . Funny that I was amazed it had been so long . . . it hasn't . I guess with the corrected math the darn thing has cost me about $10 a month. Still cheaper than my gas bill and just as useful . I knew those inserts didn't last that long. 2 2 Quote
Beechwood Chip Posted November 20, 2025 Report Posted November 20, 2025 If I were going to spend that kind of money I'd want a helical cutter head, not spiral. Has anyone done a head to head comparison? Maybe spiral is almost as good? 1 Quote
Popular Post gee-dub Posted November 21, 2025 Popular Post Report Posted November 21, 2025 On 11/20/2025 at 3:30 PM, Beechwood Chip said: If I were going to spend that kind of money I'd want a helical cutter head, not spiral. Has anyone done a head to head comparison? Maybe spiral is almost as good? We can all only report from our own experience. I used a spiral head jointer right next to a helical head jointer. I could perceive no difference in the surface result. Both machines were new and running on the first face of the cutters with only a few hours of use. I didn't actually chalk-smear the surfaces but, running your hand over them and using a raking light for a visual there was no difference. 5 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.