Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Turned Bowl with a miter saw

Featured Replies

My Spidersense went into overdrive watching this, but he finished the project with no accidents.  Damn.

 

  • Popular Post

I'm inferring what they did from the thumbnail... I'll just say that because something can be done, doesn't mean it should be done.

  • Popular Post
On 4/28/2026 at 5:53 AM, Von said:

I'm inferring what they did from the thumbnail... I'll just say that because something can be done, doesn't mean it should be done.

Ding, ding, ding.  Cool result but I have seen folks over on the router forums try to brush their teeth with a router just to show it can be done (sarcasm). Sphincter = Snare Drum on some of that stuff.

I don't want to even watch this lest I add to the number of views. :o

  • Popular Post

This sort of work must be treated as 'machining'. In metal work, jigs & fixtures are required work holding because the forces involved are simply too great to manage by meat power. Wood machining demands the same, because the risk of injury is high.

For example, my efforts made use of a custom jig to hold the work rigidly, and spin it over the TS blade, keeping me well out of the danger zone.

 

  • Popular Post

Just added this to the list of things i won't be trying, ever. 

I would have one of 3 outcomes:

Bad

Really bad

Horrific. 

  • Popular Post

I had a small wood 'machining' task today, so thought I would share.

I cut some clamp knob blanks with a hole saw in the drill press, but needed a shoulder to keep fingers off the clamping surface. I used the hole blank like so:

IMG_20260430_050218150.thumb.jpg.96438debaf608fd016ff0c9b217fd349.jpg

Raising the saw blade into it to the desired depth. With the knob blank attached to a piece of all-thread and chucked into my hand drill, I spun the blank in reverse and lowered it slowly into the hole. With the blade offset to the right side of the hole, and the drill spinning reverse, the wood was feeding IN to the cut, and also keeping the lock nut tight. Here is the result.

IMG_20260430_050342442.thumb.jpg.a789a41ca79f013a4935d4c3dfb839f6.jpg

Perfect shoulder. I considered a similar method with the router table, but the saw seemed less likely to catch and tear out the wood, given tooth size and cut direction. A fast spin and slow plunge made this go pretty smoothly. I tried a slow spin at first, but that let the saw start to cut, rather than 'grind'.

Here is an assembled clamp (no finish yet).

IMG_20260430_052102826.thumb.jpg.ce029049a853a3eea3d27714dab83a7c.jpg

  • Popular Post

Personally, I'm too lazy.  I would have just bought a threaded knob. :)

  • Popular Post
On 4/30/2026 at 4:46 PM, wtnhighlander said:

I don't blame you, this would be 'wasted' time if I had anything better to make. As it is, I'm just puttering with shop accessories and putting scraps to good use.

At least you're puttering. I sat all winter chomping at the bit and now that warmer weather is here, the only thing I've made in my shop so far is an impressive amount of coffee grounds. Just haven't been able to get into gear.

On 5/1/2026 at 9:15 AM, Ron Swanson Jr. said:

Just haven't been able to get into gear.

Good time for a shop project to build a little momentum.

That video seemed off, almost AI looking. Either way it seems like something I won't be doing!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.