Popular Post gee-dub Posted August 12 Popular Post Report Posted August 12 I have been using a Rubbermaid plastic bin to hold odd cutoffs near the jointer/planer perpendicular intersection. I assumed this would be temporary and go away through normal shop activity attrition. It has been . . . years!!! The plastic bin has performed admirably but has become shape distorted and the bottom is nearly worn through since it has no wheels and just gets dragged back and forth when I need to move it. Being a card-holding member of the Dumpster-Divers-Guild I have some nasty old plywood scrounged (with permission) from a construction site nearby. Apparently some formally trained professionals were planing to use it for concrete forming until someone made them aware of phenolic coated plywood and one of its many uses in the concrete industry. They yanked all this sub-standard stuff and were tossing it. Fortunately they had not yet applied the concrete release agent so I was able to gather up a bunch of it for just such an occasion. I drag out the foam insulation board I use for cutting sheet goods. These fellas have earned their way. A great sub-$1000 investment and I should have done it sooner. Like many I use a straight edge to align my rails when joining them. And away we go. I break down over-sized panels for the parts for this simple rectangular bin. I know a lot of folks use the track saw to cut to final dimensions but I normally don't. The tablesaw and sled come into play for accurate final dimensions. The bottom will be a couple of sub-5/8" pieces laminated together. Bowed cauls come into play here along with some yard sale weight plates. I think I have everything I need but, just in case there is another 4x8 sheet of garbage plywood waiting in the wings. 5 Quote
Mark J Posted August 12 Report Posted August 12 This will be an interesting project to see. Looks like it will be heavy; are you going to put it on casters? Quote
gee-dub Posted August 12 Author Report Posted August 12 @Mark J - Yes. Ergo . . . "Rolling" . Part of the problem is that where this "temporary" bin sets can get in the way every now and then when I am doing things like using the planer sled or planing thick pieces. I need to stand in that position to manage the weight of the material during the operation. This is a now and then thing but, the poor Rubbermaid bin has been moved enough to start to fail. A box on casters will serve me better and the plywood was free . My eyeballs are not up to doing any precision work yet but this is pretty rough stuff. I may even just use glue and a brad nailer. 2 Quote
Popular Post gee-dub Posted August 12 Author Popular Post Report Posted August 12 I cut the doubled up bottom panel to final size. I dig out my "tackle box-o-lag screws". The casters will just lag in with 1/4" x 1" lags and washers. I want some reinforcement at the corners so I rip some construction grade material at the bandsaw. No need for super-precision here; it's just a scrap bin. I picked up the term "dummy block" for the blade safety block at the rear of a sled from Gary Rogowski years ago. The reason is that some day, some dummy, may saw too far while using the sled. I'll back fill that with leftover epoxy next time I stir up a batch. I also use any leftover epoxy to back-fill my ZCI slots if they are due. So I've got the bottom laminated, the sides and ends cut to size . . . moving forward. I am using the typical force to position, glue, and screw method. I'm making a scrap bin . . . not a blanket chest. Just to make the process complete I am sure to use drywall screws. See you in a while. 4 Quote
Popular Post wtnhighlander Posted August 12 Popular Post Report Posted August 12 @gee-dub, all your talk about dragging the bin around made me think of additional uses it could fulfill. Assuming the bin is below work surface height, add a hinged (or sliding, for multiple heights) panel to one side, and it becomes a moveable feed support for long stock. Probably want locking casters for that, though. At least the waste inside serves as ballast. 2 1 Quote
Von Posted August 13 Report Posted August 13 12 hours ago, wtnhighlander said: @gee-dub, all your talk about dragging the bin around made me think of additional uses it could fulfill. Assuming the bin is below work surface height, add a hinged (or sliding, for multiple heights) panel to one side, and it becomes a moveable feed support for long stock. Probably want locking casters for that, though. At least the waste inside serves as ballast. The idea of coordinating heights of things in the workshop is one I've learned from this forum and wish I had gleamed much earlier. 1 Quote
gee-dub Posted August 13 Author Report Posted August 13 On 8/12/2026 at 4:55 PM, wtnhighlander said: @gee-dub, all your talk about dragging the bin around made me think of additional uses it could fulfill. Assuming the bin is below work surface height, add a hinged (or sliding, for multiple heights) panel to one side, and it becomes a moveable feed support for long stock. Probably want locking casters for that, though. At least the waste inside serves as ballast. Definitely a clever idea. I already have a lot of adjustable work supports. If I was lacking I would go with your idea in a heartbeat. I always like to make things that take up space in the shop do double duty. 2 Quote
gee-dub Posted August 13 Author Report Posted August 13 Hating life right now. AFTER I already started assembly I noticed some things were not quite right, panels not square. I thought "OK, the dimensions on this thing are not critical I will just make it a bit smaller and move forward". I adjusted all the panels . . . still not square . . . "uh-oh". I checked my sled. It had gotten knocked out of adjustment. Take a bad perpendicular angle and compound it and things get ugly fast. I came in to take a break before I go out and true up the sled. Fortunately I have done this enough that I can do it pretty quick. It's just that now I have to go through all the panels and true them up . . . again, resize the base, re-drill the caster holes, etc. I have fallen all the way back to step 2 with the added difficulty of things being partially assembled. Why do I ever try to work with sheet goods? It never ends well for me. Some people make it look so easy (???). Oh well, I needed something to keep me busy while my eyes adjust anyway . . . right? Somebody who works with plywood would have had this thing done by lunch . . . and would have done a better job . . . rant off 1 4 Quote
gee-dub Posted August 13 Author Report Posted August 13 Dialed the sled back in and am back to the assembly phase. Again, sorry for the rant 2 Quote
Popular Post gee-dub Posted August 15 Author Popular Post Report Posted August 15 I have railed against my attackers and emerged triumphant . I cut hand holds in each end and one end had some serious voids in the plywood. I cannot blame the plywood as it has set between an outbuilding and a wall, outdoors, for a couple of years. By all rights it should actually be unusable. Anyway, I filled in the gaps with some epoxy. For quick fixes like this my favorite is West G5. I am not trying to make it beautiful but, a little less splintery would be nice. Enter the Bosch Sander of Death . . . When I am using rattle cans I tend to stop when the levels get low. This avoids the sputtering "last gasp" effect that can cause you headaches. The end result is that you have a collection of cans with just a little finish in them. This is the perfect project to empty these buggers. I can feel it . . . I am going to finish this thing off today . . . It ain't purdy but it is functional. I'll post a completed pic in a while. 3 Quote
Popular Post gee-dub Posted August 15 Author Popular Post Report Posted August 15 OK, made it. Having casters will be nice. Here's the old and the new. Much better. I take pride in having made this thing out of full-on dumpster diver stuff. Old plywood out of the yard, old dimensional lumber, old Harbor Freight casters from I-don't-know-what but obviously used. For full disclosure I did have to use a little bit of spray shellac when I ran the three "last gasp" lacquer cans dry. I also use about a half a dozen new screws when I ran out of old reclaimed drywall screws of the right length. Other than that this is a total scrounge project 5 Quote
Popular Post Dave H Posted August 15 Popular Post Report Posted August 15 I did something similar a few years ago it helps keeping the mess organized. Mine is bigger and I ended up putting a lower bungy retainer in I like the open front... easier to see, for me. 4 Quote
Mark J Posted August 16 Report Posted August 16 Looks good, gee-dub. Seems to nestle into that space just right. Maybe it's fortuitous that you had to downsize twice. 2 Quote
gee-dub Posted August 16 Author Report Posted August 16 On 8/16/2026 at 7:09 AM, Mark J said: Looks good, gee-dub. Seems to nestle into that space just right. Maybe it's fortuitous that you had to downsize twice. I can see that you are a "silver lining" guy like me. Whenever something odd or unplanned happens I try to look for the advantage . . . although sometimes I have to rant a bit first. 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.