nlwoodworker Posted July 21, 2011 Report Posted July 21, 2011 Anyone out there using the Veritas Router Plane - http://www.leevalley.com/en/wood/page.aspx?p=52609&cat=1,41182,48945,52609 I'm considering purchasing and would be interested in any feedback, experience that you may have with this router plane. Quote
ChetlovesMer Posted July 21, 2011 Report Posted July 21, 2011 Marc uses one all the time in the latest series of guild builds. He's got me convinced I need one. Quote
mlingenfelter Posted July 21, 2011 Report Posted July 21, 2011 I own and use the Veritas Router plane. It is a very nice plane and is very useful. Of the "specialty" planes, it might be the one I use the most. Mike Quote
RenaissanceWW Posted July 21, 2011 Report Posted July 21, 2011 Easily one of the best planes to have in your tool cabinet. While there are many specialty planes for joinery I find the router to be the utility player that can handle them all. This is coincidentally why I included it in the starting group of tools for my Hand Tool School. Dado, grooves, rabbets, tenons, sliding dovetails you name it this plane will help you. The smaller models by LV and LN are also helpful but the larger model is imperative for joinery refinement. I don't have much time wit the LN model but I really like the Veritas for ease of set up and use. In other words, run, don't walk to get one. Quote
RenaissanceWW Posted July 21, 2011 Report Posted July 21, 2011 This post got me looking at the new depth collar. I didn't know they had one and this was the only feature about the Veritas I didn't like. I also wasn't aware they had thinner blades available. I found myself wanting a 3/32 blade just the other day. So thanks nlwoodworker, you just cost me $13 for a blade, but the depth collar was free! Quote
nlwoodworker Posted July 21, 2011 Author Report Posted July 21, 2011 This post got me looking at the new depth collar. I didn't know they had one and this was the only feature about the Veritas I didn't like. I also wasn't aware they had thinner blades available. I found myself wanting a 3/32 blade just the other day. So thanks nlwoodworker, you just cost me $13 for a blade, but the depth collar was free! Hey that's what we're here for -- to help each other rationalize our new tool purchases Quote
Southwood Posted July 21, 2011 Report Posted July 21, 2011 Handy tool to have. I have 2 Stanley 71's that I picked up at flea markets. I there is something you need worse, I would buy it first. If not, pick one up. Quote
PaulC Posted July 21, 2011 Report Posted July 21, 2011 Love mine. Don't use it all the time, but when I do, it's the only tool for the job. Quote
Jim Heinbuch Posted July 21, 2011 Report Posted July 21, 2011 Anyone out there using the Veritas Router Plane - http://www.leevalley.com/en/wood/page.aspx?p=52609&cat=1,41182,48945,52609 I'm considering purchasing and would be interested in any feedback, experience that you may have with this router plane. I certainly am not an experienced woodworker (yet) but I purchased the router plane a while ago and I do use it regularly. It is expecially helpful in cleaning out the bottoms of dadoes. -Jim Quote
ChrisG Posted July 22, 2011 Report Posted July 22, 2011 Possibly my favorite tool. Its one of those tools that you constantly find new uses for. It is the first specialty plane I would recommend anyone get - before a shoulder plan, before a plow, before a rabbet plane. I've said it before and I'll say it again - from my cold dead hand... Quote
PaulMarcel Posted July 22, 2011 Report Posted July 22, 2011 This post got me looking at the new depth collar. I didn't know they had one and this was the only feature about the Veritas I didn't like. I also wasn't aware they had thinner blades available. I found myself wanting a 3/32 blade just the other day. So thanks nlwoodworker, you just cost me $13 for a blade, but the depth collar was free! Definitely order the new stop collar; works well. I was also happy about the narrow blades although I hoped for a 1/16". The old stop was a set of jam nuts, but when they 'jam' another nut, all they do is all turn together. I thought that was a mistake when I first got it so glad to see the change. So, in the instructions for the new stop collar it says something like "this new design eliminates the need for an Allen wrench to lock the collar". In a long chat last night with FlairWoodworks, neither of us had an Allen wrench or any set screws on ours. The jam nuts, though, had two lateral holes each that I'm hypothesizing were, in later versions, threaded with a set screw; that would accomplish the same thing as the new stop collar. Anyone confirm that? Mostly curious. Quote
ChrisG Posted July 22, 2011 Report Posted July 22, 2011 So, in the instructions for the new stop collar it says something like "this new design eliminates the need for an Allen wrench to lock the collar". In a long chat last night with FlairWoodworks, neither of us had an Allen wrench or any set screws on ours. The jam nuts, though, had two lateral holes each that I'm hypothesizing were, in later versions, threaded with a set screw; that would accomplish the same thing as the new stop collar. Anyone confirm that? Mostly curious. The hole in the jam nuts just allowed you to stick the end of an allen wrench in each and use the wrenches as leverage to tighten the nuts together. It is more effective then finger tightening, but really not worth the trouble. I've had my router plane for about a year and as far as I know they never put or intended to put set screws in them. I still haven't ordered the new stop collar, but it looks like a huge improvement. Quote
PaulMarcel Posted July 22, 2011 Report Posted July 22, 2011 Oh, that's what they meant. To me, "Allen wrench" meant a set screw somewhere. I never got an Allen wrench with the plane; neither did FlairWoodworks. Yeah, that would be so hokey that I wouldn't expect it from Veritas. My only concern with the new stop is: will it damage the threads over time? I haven't looked inside to see how it presses. Quote
tombuhl Posted August 3, 2011 Report Posted August 3, 2011 I am very fond of my Veritas Router Plane. Do not use it as often as block plane and the other basic models, but a joy to have in the arsenal. Today I used it for a new-to-me task. Had watched video using a dedicated groove cutting wooden plane. Thought it would be cool for cutting grooves to capture drawer bottoms. Then realized the Veritas Router Plane could do the same thing, if you have the optional (I believe) fence. Gave it a try. Easier to set up than a corded router, much quieter, more satisfying. Takes longer, but all that much for a single drawer or two. Straight forward and so very groovy. That and my Grammercy bow saw are the two tools that make me smile the most when I use them. I'll second others' opinion to buy a quality block plane. Much easier to get going with and not all that expensive compared to comparable smoother or jointer. Many, many uses. Quote
Vic Posted August 3, 2011 Report Posted August 3, 2011 Oh, that's what they meant. To me, "Allen wrench" meant a set screw somewhere. I never got an Allen wrench with the plane; neither did FlairWoodworks. Yeah, that would be so hokey that I wouldn't expect it from Veritas. My only concern with the new stop is: will it damage the threads over time? I haven't looked inside to see how it presses. I think they could've easily been tapped to have a set screw. But, no mine doesn't have threads in the holes either. Quote
baok Posted August 9, 2011 Report Posted August 9, 2011 I have anvils Stanley # 71. I never quite gotthe hang of it and wished for an easier adjustment for the iron like the Veritas has. I also don't thinking ever sharpened it well enough. Quote
Hans_Christopher Posted August 12, 2011 Report Posted August 12, 2011 as always a sharp blade solves just about anything Quote
Texfire Posted August 12, 2011 Report Posted August 12, 2011 Thanks to this thread, I think I'm going to get a router plane before getting a rabbet or shoulder plane and see if I find a need for either of those. Quote
nlwoodworker Posted August 16, 2011 Author Report Posted August 16, 2011 Thanks everyone for your input. I picked up one of these last week at the Lee Valley Burlington, ON store. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.