Recommended Posts

Posted

ok thinking about geting a good system for sharpening my tools.

i was thinking of three different methods.

1. the scary sharp method with a sheet of glass and sand papers.

2. a spinning sharpening system that will allow me to sharpen my tools on a spinning disc of sand paper.

3. a set of stones that i would have to change?

the question is will the scary sharp method make me run out of sand paper super fast? is the spinning system flawed in any way? what kind of stones should i get?

this will be for my chisles, planes, carving tools, and miniture lathe tools. im a weekend warrior but i also teach a wood shop class we dont use chisle very often because of the type of kids i teach but i still have to sharpen the tools. what do you use and recomend? something that is a good product for the price.

Posted

Scary sharp works fine, but fine grit sandpaper is sometimes tough to find, and it's long term expensive.

Spinning systems are pricey up front, and the media is an ongoing expense, as well.

I think the Norton 1000/8000 is a good stone at a reasonable price.

The Eclipse jig is inexpensive, and will do all you need of it.

See here, build this, this is the method we teach at Hand Tool Events, and what I use in my shop.

Posted

SSDD (Same Situation, Different Day):

This topic has, and will continue to be, frequently discussed and discussed often. There's a plethora of articles, tutorials, books, videos and group discussions on this topic that are waiting at the end of the Google rainbow. A good place to start is to Google the learned words of our host. Books by Lee, Hock or Schwarz are classics and well worth reading.

I could tell you how I've been doing it for 40+ years (stones; some oil and some water; and a hand cranked grinding wheel for axes, adzes and froes), but that's just me.

Acquire skills, not tools.

  • Like 1
Posted

:( you ever try a finish made from korn syrip? or making your own glue

woops yep sorry oh well doing 4 things at once and i make errors......stage diving new one on me

Posted

thanks onboard realy helpfull. i was afraid i would have to buy like 8 stones for anywhere between 40-70 dollers each plus get a jig and a guide ect.......i think that i will go with darnel sugestion and get the stone plus a jig and get some glass for lower and in between grits. have 220-900 on one side and 1200-7500 on the other side. that way i can both learn and teach the kids how to do two seperate methods. right now im just using a grind wheel and a old worn out stone so i have lots of room to improve

just trying to decide if i want to try water, oil or ceramic seems like everyone has there preference.

i also was thinking of converting a old virtical sander into a sharpening system. (just for fun)

Posted

I don't have much to add except a story. I spent an afternoon with a guy to learn the art of hand planing. He had one of every type of sharpening system. His favorite was one he had built himself that looked a lot like the worksharp system that is sold now. He recommended I buy one of those but instead I bought two oil stones because I isn't want to set myself up for having to buy consumables the rest of my life.

(null)

Posted

Last week I went to a "Hand Plane Revival" seminar with Rob Cosman. A good deal of it was spent on sharpening. His preferred setup (which I think I'll also use) is the 1000 and 16000 Shapton stones, and he used the Shapton diamond lapping plate. I was pretty impressed with the results. At one point he was getting end-grain shavings off of about a 2" x 16" piece of maple. He of course uses the "Rob Cosman Trainer" to get the angles right.

Posted

A friend has a Tormek and lets me use it freely. I must say that it is a wonderful thing but holy cow - the price is way out of my reach (especially after you acquire all the various jigs for different tool types). Plus, he has to dedicate a space for it - he keeps in in his kitchen near the sink.

It does do a wonderful job though - if I was a professional, i'd definitely invest in one. Until then though, it's just the basic stones and a jig.

Posted

actuly vic im thinking that some day down the line i will build something similar for the classroom. maybe not as big or have a water heater but some kind of tub to connect a hose to to put water strait from tap into tub to sharpen my stuff on. something smaller and mobile im thinking.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.