Recommended Posts

Posted

I see so many threads on what tools to purchase... I figured I'd add one more. I know what I want to purchase, just need a little feedback from some of you.

I have about $1000 right now available to spend on a new tool. I know I could use a jointer and I want to get a good one. I see grizzly makes some at a fairly low cost. However, I know nothing about grizzly, and the reviews I read tend to be all over the map - either people are happy or hate them. I could save up longer and get something like a powermatic, or... I can get the grizzly now. What would you do? Are grizzly tools that bad or low quality? I can't imagine they would be that horrible or people would stop buying them. Would you save for the better part of a year for the higher priced powermatic? I guess I don't need one right away, as I can make do with other methods and tools...but a new jointer would sure make things easier. Thanks for your thoughts.

Posted

For what it's worth, I can't comment on Grizzly, but do have an opinion on Delta.. I have the 6" Delta X Series jointer and IMO would not buy it again (same with my delta X planer). Granted this isn't an 8", but quality is quality.. This line is touted as being excellent but what I found was cheap parts and sloppy machining.. Half of the threaded holes were burred requiring me to chase them with a tap and the bolts had a VERY low shearing strength. A few of the bolt heads twisted right off before I even had them snug (far from tight)... A lot of adjusting later and they work decent but not what I was expecting.. If I had to do it over again I would have saved and gotten the PM stuff. I have their tablesaw and mortiser and there is a night and day difference in quality. So, Grizzly.. cant say, but based on my experience would not put delta in the mix of options... Maybe they were just having a bad run on quality control at the time and have gotten better.. Would be curious to hear what others say as well..

Good luck!

Posted

Jwest, there is nothing wrong woth Grizzly. I personally am a big fan. THey took care of me one time, and I will continue to go back. As for customer service, they are top notch. I have the Griz 12" jointer w/spiral head and as far as I am concerned, you cant go wrong. The fit and finish is good and I have had absolutely no problems with it what so ever. For an 8" jointer, you probably cant go wrong with this one. If you can squeeze out a few hundred more, then I would get this one, with the spiral head. Popular Woodworking did an article last year about straight knives vs. spiral heads. Good read. Good luck with your purchase. Let us know what you did.

Posted

I too have the Griz 12" jointer with spiral cutterheads. Before that, I had the 8" Griz and it too had spiral heads. I agree with Sac. If you can spare the extra $$$, go for one with spiral cutterheads. You'll be glad you did.

Posted

Spiral cutterheads are a big plus, especially in the long run.

I have the Delta DJ-20 (about 5-years old) and it is a solid machine. One of the Grizzly 8" jointers looks identical, with the exception of the switch location. I have a friend who has one and is very happy with it. He also has a Grizzly 19" bandsaw he loves; I have a Grizzly sliding table saw which is exceptional value.

Posted

Well, I guess grizzly it is. I'll probably save a few hundred extra and get the parallelogram spiral head one. Nice thing is, grizzly has a show room out here about 3 hours from me so I can go check it out. Do you guys use the parallelogram feature very often on your jointers...if you have that? If so, for what purpose do you generally use that? Thanks for the feedback.

Posted

I have a DJ20, which replaced a 6" Ridgid. At the Williamsport showroom, I've touched most Grizz models in person.

I really like my DJ-20, but would not hesitate to buy a Grizzly parallelogram machine. I find parallelogram machines operate more smoothly, for longer, with less maintenance, than dovetail machines. A guy near me has a 12" Grizz in his pro shop, and has been happy with it for 4-5 years.

One thought... If the spriral head is cheap, get it. If not, my thought is that face jointed faces often get thickness planed anyway, so if I could only afford one spiral cutter, it would be on the planer, not the jointer. If you can get both with spirals, that's the ticket.

Posted

==> Spiral cutterheads are a big plus

on a jointer? planer can see it, but i prefer tersa on a jointer. why do you prefer sprial on a jointer?

Would be nice if Powermatic and the others made tersa heads. I almost went with all felder but just was to leary about downtime. I cant really justify the cost of spirals and would not have one on a planer again. My jointer is spiral, not something to call home about compared to regular blades.

Don

Don

Posted

I was all set to buy a 6 inch spiral head jointer but now I am considering a 10 inch spiral head combination machine, thicknesser and jointer in one. The one I have linked to can have the laguna spiral head fitted for a few hundred more than the standard blades. I still have my old 733-xe dewalt for slightly wider thicknessing if needed. This machine offers me a small footprint in the workshop, planing up to 10 inches wide, thicknessing up to 10 inches wide and 7 inches thick at 25 feet per minute.

I believe the difference between spiral and standard heads is much cleaner cuts, no chatter marks, much quieter operation, a nicked blade is a quick rotational adjustment- not downtime for full width blade replacement, curly grain is not an issue and the little cutters are a snap to change.

Any thoughts?

Posted

==> Spiral cutterheads are a big plus

on a jointer? planer can see it, but i prefer tersa on a jointer. why do you prefer sprial on a jointer?

Tersa heads are super easy and quick to change. Spiral cutterheads are the next best thing in that regard. What I like about the spiral cutterheads is that the individual carbide teeth can be rotated and changed positions. When I use my jointer, the front cutters see the most wear and the back ones the least. So I can rotate the front cutters to the back and back to front to extend the life of a single set of edges. There are other benefits that the others have mentioned, but this is the big one for me.

Posted

i'm using tersa on the jointer and helical on the planer at the moment. i'm switching back to tersa on the planer (it takes quite a while two swap 130 or so cutterheads).

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 50 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined