Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

In the market for a track saw

Featured Replies

  • Author

After borrowing one for a couple of days i finally purchased the ts55 yesterday. love that saw.

They are bottom line excellent, I will be moving to my new house in a couple months. Finally can setup my shop the way I want.... at that time and can arrange for blue foam storage for breaking sheets down... so much easier.

I was wondering if I was the only TS75 fan. I made this decision because of the extra capacity for thicker stock ... more flexibility.

I was wondering if I was the only TS75 fan. I made this decision because of the extra capacity for thicker stock ... more flexibility.

When I did on site wor I was a serious festool junkie. The TS55 is a neat little saw but they dont hold up to serious use and are a little light on power. The ts75 besides the depth will last longer and cut easier. If I were going to invest in another track saw it would be the ts75 for those reasons alone. The depth of cut would have no influence on my decision.

Don

I just ordered a ts 75 with additional 55" track with holes (might come in useful), 11" screw clamps and a track joiner as well as the ct 36. You're all the first to know.

I just ordered a ts 75 with additional 55" track with holes (might come in useful), 11" screw clamps and a track joiner as well as the ct 36. You're all the first to know.

well done! I hope you didn't make the same mistake as me and presumed the track joins came as a pair.

==> I joined up two tracks (1400 and 1900) again tonight to rip some oak ply. .

i actually broke down and got the 8'6" track for sheet goods. is more robust then my jointed setup. was a few $$, but the ease of use is much nicer. now storing it is a pain...

==> I joined up two tracks (1400 and 1900) again tonight to rip some oak ply. . i actually broke down and got the 8'6" track for sheet goods. is more robust then my jointed setup. was a few $$, but the ease of use is much nicer. now storing it is a pain...

If you have a garage shop, pop it up on the garage door. I have two on mine with room for a third; convenient when the door is up or down.

well done! I hope you didn't make the same mistake as me and presumed the track joins came as a pair.

You need 2 of them? Seriously ?

Why the heck would they sell just 1? $15 each seems expensive, I'm reading that a lot of people don't care much for the connectors and would another longer rail for 8' cutting. I hope I don't find the same alignment issues. I just spent enough on the system and extra track, I really can't go out and get an 8 foot rail that costs more than my miter saw did. I don't mind hauling out a track to connect to when I need it but if I find I have to get a straight edge out just to make sure the connected tracks aren't bent or out of line and clamp them down straight I'll be upset.

Does that MFT come with a rail? If I buy that down the road I'll find myself with yet another short rail which I didn't need.

I use the connectors. They're easy to use if you're remotely logical about how to get them aligned. To me, I would MUCH rather have the small annoyance of using the connectors than the huge problem of storing the 3m rail without damaging it.

I use the connectors. They're easy to use if you're remotely logical about how to get them aligned. To me, I would MUCH rather have the small annoyance of using the connectors than the huge problem of storing the 3m rail without damaging it.

What he said.... I have the two and I have only done it once or twice, but it really isnt that hard to get them aligned and good to go.

You do know that hey actually sell them in lengths up to nearly 16'? You just have to order them. So, if you really want an extra long one they are easily acquired, for a nominal fee of course.... B)

Joining in the TS55 love. Prior to owning one, the only way I could get 'within' final dimensioning on large pieces (plywood, MDF, etc) was cutting on the tablesaw. Sometimes this worked fine - though the slightest move off path could throw the accuracy off - but other times it made me nervous as the boards weren't always supported sufficiently. Not to mention I don't have much shop space to maneuver in. Prior to owning the tablesaw, the best I could do was a straight clamp guide and a jigsaw....ha, no need to mention how accurate that was. The clamp guide I have can also slightly shift when engaging the clamp, so that was also a frustrating bout of trial and error.

I waffled back and forth between the TS55 and TS75, as the TS75 does come with a longer track. But after holding both at the store, I felt the TS55 'felt right' in the hand and like someone said above, the shorter tracks are easier to store. Don't regret my purchase, people are not kidding when they say the track is dead-on accurate. Where you lay it is where it will cut. I know there are parallel clamp guides for the track, but I just use a machinist's square butted up against the track to check both sides, and my corners have been perfect on large panels.

But in reference to the OP, yeah, the TS55 is overkill for just roughing. Honestly, I think even a jigsaw works fine for that (I never owned a circular saw).

==>But in reference to the OP, yeah, the TS55 is overkill for just roughing. Honestly, I think even a jigsaw works fine for that

+1... I use jigsaw for roughing.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.