Recommended Posts

Posted

I have a Grizzly G1073 16 inch band saw that is in great shape. I picked it up at an estate sale and thought it would serve me well. I was wrong. The saw is great, but its just too much for me. I am a disabled veteran in a wheelchair. I can't reach the tension knob at the top of the saw and changing blades is horrif when you can't stand up! The table is about at the same level as my chin. I have previously owned a cheap Skil bench top saw and don't want that kind of garbage again. I am looking to sell the Grizzly and buy a smaller saw, but I want something that will cut hard woods and still be usable for me. My price range would be about what I could get for the used Grizzly (along with the roller base and a good number of unused blades). Any suggestions for a new saw or how much I should ask for the Grizzly?

Posted

I have an old craftsman 14" that i got from my dad which sounds like would fit your situtation. It has enough muscle to go thru everything i threw at it and was a real solid performer. The only reason i dont use it daily is because i came across a 16" craftsman at a steal of a price and i have to say im happy with that one as well. Both saws should work providing you could make a custom stand to lower the over all height.

Posted

The newer 14" saws with the motor above the base I would think you could be adapted to wheelchair height, shouldnt be anything more than building a short base. Call equipment sales and surplus in Auburn WA. Tell them what you need, they get saws all the time with bases that have been destroyed in shipping and the saws are fine.

Don

Posted

I just paid 250 for a 1990 16" Grizzly off of Craigslist. It is in near perfect condition.

I think all the 16's have motors in the stand. Something like this so the legs can get cut off or just placed on a plywood box to lower the height.

http://www.google.com/products/catalog?q=jet+bandsaw&oe=utf-8&rls=org.mozilla:en-US:official&client=firefox-a&um=1&ie=UTF-8&tbm=shop&cid=14759474164336385221&sa=X&ei=dQmHT8LRL8WniAKIlcnTDw&ved=0CJ4BEPMCMAU

Posted

I just paid 250 for a 1990 16" Grizzly off of Craigslist. It is in near perfect condition.

How can you tell what year the saw is? Mine is pristine (the deceased gentleman who originally owned it barely used it and I have used it twice) but I don't see a data plate on the saw housing. My saw is also on an HTC mobile base and has a dozen or so blades (most still coiled from the factory) of various widths. Did the saw you purchased come with any accessories?

Posted

I'd get with Sac. He's got an awesome shop that is customized for wheelchair accessibility. He'd also be great for advice on how you'll need to tackle procedures differently.

(null)

Posted

Look at the Laguna 14" saws. They have an unusually low table height that gets pointed out in just about every review of them. The LT14 SUV verision also has probably as much resaw capacity as your 16 (if not more) and the motor to back up the threat.

Posted

Hey collinstomj, I feel your frustration. I too am a disabled veteran in a chair. This was one of the same problems that I encountered when I was setting up my bandsaw. What I ended upo doing was making a new base for the bandsaw. Now, in your case I am not sure how much that would help because of that motor that is hanging off of the bottom. I ended up getting this saw. I willpost a pic so you can see what it looks like now. My entire shop is set up. If you need any ideas, you can look through these. Hope this helps. Also, dont know if you have a jointer yet, but I used to have that little Griz 6" there, it was pretty easy to chop off the lower mobile base part of it and drop it 6". Worked great until I decided that I needed to get a bigger jointer.

DSC00196.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 46 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined