Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

My first bent wood project

Featured Replies

I'm kind of proud of this one. I had to make a set of bannisters for thes brick steps and the boss said, "Here" and handed me a hand-drawn sketch of what he wanted. I scratched my head for a while and then went to work. The newel posts are tapered, with square bases so that when the caps were added they would look like lighthouses. Each run had five 1-1/2" square tubes epoxied into the brick steps for anchor posts and I had to lay out the spindles so they all lined up. Tell me what you think of the finished product.post-7382-0-03708600-1346636484_thumb.jppost-7382-0-83578200-1346636498_thumb.jppost-7382-0-80472700-1346636514_thumb.jppost-7382-0-11331400-1346636528_thumb.jppost-7382-0-97945500-1346636539_thumb.jp

  • Author

First you have to buy every clamp in the world and then start gluing up strips, in place. I then disassembled the parts for machining. There might be a better way of doing it, but it was my first time and it seemed the way to go for me. I sent the top rail back to the shop for machining because we didn't have a shaper on the job site. I tapered the posts on the jointer, they were hollow, and then split them to put them around the steel anchor posts at each end.

i'm guessing you did a dry bend rather then steaming a larger piece of wood and manually bending it. but this is impressive for a first try.

  • Author

I didn't use any steam on this project. All the pieces were glued up in 1/4" to 3/8" strips, glued and clamped, one layer at a time. I used Titebond III as the glue of choice. Once the outside portion was completed, I installed the spindles, and then constructed the inside radiuses.

TRBaker,

Great job. I would have done it the same way you did. I would have build forms and then bent the strips to the forms. The only way you get around using a million clamps is by building a set of forms an inside and outside form and use good high quality ratchet straps. Still end up using other clamps just cuts down the amount :) Again amazing job looks awesome would have loved to worked on that with ya.

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.