Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Got Wood? Turning blanks

Featured Replies

I'm excited about a shipment of turning blanks I just received from Got Wood? http://www.turningbl...vlet/StoreFront I'm a novice turner so I selected a variety of different spindle blanks and bowl blanks to practice on and to see which woods I like. Here is a picture of my wood. I like it that the bowl blanks are already cut round. :)

post-5342-0-28996700-1346795632_thumb.jp

What other commercial sources do you turners use for turning blanks? BTW, Got Wood has great service. My wood was shipped the same day as my order, it arrived in perfect condition and the wood looks great!

Cindy

i have worked with black locust it sands and finishes nicely...cherry nice can be tricky to finish it......maple turns easily, takes finish well little on the bland side....... wait stop everything does that block say cucumber on it? :)

if you ever get hickory be carefull every time i used my skew and finger nail gouge on it it would catch and then i would have a deep nasty rip in the wood. i found the best way to turn hickory is by using scrapers. then it just peals right off the lathe in nice steady streams.

if you ever get a chance to turn green lilac do it i enjoyed the smell filled my entire shop with the smell of fresh pumpkins reminds me of carving them in the fall.

  • Author

Duck,

Yes that does say cucumber! Here is what they say about the cucumbertree.

Cucumbertree is a type of magnolia tree, easily identified by its cucumber-shaped seed pods. The wood is a yellowish-white color, with well defined annual growth rings that vary between black and reddish-brown. The wood is excellent for turning projects. It has an excellent appearance due to the highly contrasting annual growth rings, cuts very well, sands easily, and takes on a medium-high polish with sanding.

Cindy

A fellow on LumberJocks had a bad allergic reaction to sycamore. Cocobolo can cause a reaction as well, sanding fine dust caused a nosebleed for my grandad.

Just thought I would mention it , might not affect you but be aware of the possibilities .

let me know what the cucumber tree smells like.....i have some small magnolia blanks that i sorted out that drying now thought i would make some pens or jewlery for them. thought i would be able to sell them to women with the idea that now they have a pen made from there favorite flowers.

  • Author

A fellow on LumberJocks had a bad allergic reaction to sycamore. Cocobolo can cause a reaction as well, sanding fine dust caused a nosebleed for my grandad.

Just thought I would mention it , might not affect you but be aware of the possibilities .

That is interesting to know. My instructor has a reaction to walnut so that is out for us in class.

Anyone ever turn with camphor? I bought a chunk at Woodcraft awhile back. Cut a couple small pieces off to just smell every once in awhile.

hey cindy if you ever turn paduke its is a buet to work with at least the color and shine is great but it is probably the oiliest wood that i have tried. the oil seems to make the wood dust almost greesy.

Cindy,

Thanks for the heads up on Got Wood! They're actually 20 minutes from me - had no idea!

Lloyd

  • Author

Cindy,

Thanks for the heads up on Got Wood! They're actually 20 minutes from me - had no idea!

Lloyd

Lloyd,

Excellent, you can probably save a lot on shipping if they will let you drive down and pick up your order.

I like the way their website works. One can search by type of wood or dimension of blanks and the results come up with the exact numbers of those they have available. Plus they have a 'bargain bin' which has the same quality of wood but ones they happen to have a bunch of at an even better price.

-Cindy

  • 3 months later...

Sorry to revive an old thread here, but how was your experience with the lumber from http://www.turningblanks.net? (got wood?)

I am looking at placing an order for some bowl blanks. I am eyeing up some of the ambrosia maple, so any specifics you have on that one would be helpful!

The local mill doesn't round off the blanks and I don't have a band saw, so it could be worth the slight price difference in price just for ease.

Thanks!

? What are kiln samples of wood? They are a lot cheaper at lumber than the regular wood they carry? Anyone now? Thanks

? What are kiln samples of wood? They are a lot cheaper at lumber than the regular wood they carry? Anyone now? Thanks

Can you provide a link? I can't find what you are asking about.

When I went to pay for my lumber today the lady asked if I got the wood along the wall of kiln samples?.. I have not a clue but I'm going to use them anyway? They were way cheap for work and walnut

Can you provide a link? I can't find what you are asking about.

  • Author

Sorry to revive an old thread here, but how was your experience with the lumber from http://www.turningblanks.net? (got wood?)

I am looking at placing an order for some bowl blanks. I am eyeing up some of the ambrosia maple, so any specifics you have on that one would be helpful!

The local mill doesn't round off the blanks and I don't have a band saw, so it could be worth the slight price difference in price just for ease.

Thanks!

The wood has been excellent, shipment is quick, and communication with them is excellent as well. Bowl blanks are rounded off which is a big plus. Spindle blanks are square.

I haven't used the ambrosia maple yet, so I can't report on that. But, I have enjoyed working with each piece of wood I have purchased. I have placed two orders since my first, most recently for spindle blanks to make ornaments. It has all been lovely and I am looking forward to making some lidded boxes from some walnut. I highly recommend them.

Cindy

Thanks Cindy!!!

I went ahead and ordered a box of bowl blanks and wow, fast doesn't do it justice! I recieved the order within 2 business days, with regular shipping. Also, they tossed in an extra spindle blank. I don't know if that was an oops, or a thank you for either a sizeable order or first order, or what. I choose to give them the benefit of the doubt and assume it was on purpose, and was great customer service!

I ordered 13 blanks in total. I figured if I was going to pay that much in shipping, I would make it worth my while. Blanks with shipping ended up being about $10 a blank averaged out, which was comparable to the local mill that doesn't round off the blank or wax it. Their selection of figured domestic lumber was also far more impressive than the local mill.

I rough turned one of the three "Curly Maple" blanks this evening and it turned fantastic. It is green lumber, so I won't have a finished product to show you yet, but you can see it in the pic, bottom left.

I would definatley reccomend Got Wood? to anyone looking for some bowl blanks. As you can tell the figure in the lumber is fantastic! The Curly Maple blanks on the left (3) were the only "figured" blanks I ordered, though several of the others clearly have some figuring in them. BONUS!

I am not sure if this belongs in Market Place, Reviews, or Wood, but I appologize if this is in the wrong spot.

post-7224-0-63874700-1356407119_thumb.jp

wow you paying 10 bucks from a local mill ! the guy i get my stuff from nocks them out from the scrap wood he cant cut into lumber out of the crotches and odd size logs for 3-5 dollers. he just tosses them through his mill cuts the log in half then puts on band saw making a rough circle. still has bark on them and is no where near a perfect circle but they all mount onto my lathe. never know how big he is going to give me he just cuts a bunch and stacks them sometimes they are anywhere between 5-10in and i come in and wax em. he even lets me store them in his barn while they dry.

How thick are you able to get your blanks from the mill? Maybe I need to strike up a better deal with the local mill!

Ours doesn't seem to have much cut off that is thicker than 8/4. They are usually willing to work with me on most stuff, so I will have to press a little next time I am in there!

  • Author

Thanks Cindy!!!

I went ahead and ordered a box of bowl blanks and wow, fast doesn't do it justice! I recieved the order within 2 business days, with regular shipping. Also, they tossed in an extra spindle blank. I don't know if that was an oops, or a thank you for either a sizeable order or first order, or what. I choose to give them the benefit of the doubt and assume it was on purpose, and was great customer service!

I ordered 13 blanks in total. I figured if I was going to pay that much in shipping, I would make it worth my while. Blanks with shipping ended up being about $10 a blank averaged out, which was comparable to the local mill that doesn't round off the blank or wax it. Their selection of figured domestic lumber was also far more impressive than the local mill.

I rough turned one of the three "Curly Maple" blanks this evening and it turned fantastic. It is green lumber, so I won't have a finished product to show you yet, but you can see it in the pic, bottom left.

I would definatley reccomend Got Wood? to anyone looking for some bowl blanks. As you can tell the figure in the lumber is fantastic! The Curly Maple blanks on the left (3) were the only "figured" blanks I ordered, though several of the others clearly have some figuring in them. BONUS!

I am not sure if this belongs in Market Place, Reviews, or Wood, but I appologize if this is in the wrong spot.

post-7224-0-63874700-1356407119_thumb.jp

Looks nice! I'm glad your experience was as good mine.

i have goten 2-4 inch thick blanks- on average depends on the quality of the logs and the wood. i think the guys gives me a discount because he uses them so much and if he is cuting some for himself he can just as easily batch out 5-6 more for me

I take alot of walks through forests where ive been given permission to cut, any domestic woods i use, i cut myself of find a way of getting it for free. Obviously if i need a special piece for a special project i will buy a domestic blank but i dislike to, exotic blanks i like to pick and choose idk if i could just order something ithout seeing the actual pieces. I plan my projects around the blanks grain for the most part so just buying something without seeing it wont work for me.

So the only real advise i can give is if you are willing to do the work, make friends with people that have forested property, eventually a tree will need to be taken down or falls and volenteering for cleanup is my favorite way to get stock.

the local Woodcraft is operated by a turner, so that's my first choice for getting turning stock. He usually gets a pallet in of sale stuff every three months, and when I can afford it, I drop by.

lately, I've been kicking around some pens made from old furniture that used to belong to family members. The parts broke off, so there's no guilt (well, no major guilt) involved, and the furniture does not exist any more, so I thought it might be an interesting project. I just need to deal with the snow to run power to the shop... not to mention get into the shop... (have I mentioned I don't like winter?)

we have hardly goten any snow but good god its cold out maybe its just that i live in the basement and i didnt realize the vents were closed :) hahaha i spent most of the morning standing out in the wind and sunshine using my router to joint the edge's of a board. i now realize that hate hand tools and i want my jointer, planer, table saw and of obvously my lathe back got a stack of blanks in my shop and hundreds of board feet to glue up with no way to get my lathe out. at least untill it gets warm and i can drag my lathe into the driveway for a few hours.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.