Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Osborne EB3 Vs Incra 1000 HD

Featured Replies

Hey All,

I am looking to upgrade my miter gauge and cannot decide between the Osborne EB3 (currently $109 + free shipping) and the Incra 1000 HD ($160 + free shipping). I'm sure both will be a massive upgrade over my stock gauge, but would really like to hear pros and cons to both from people who have used them. I mostly need to make repeatable cross cuts as I do not have a good method for that now besides setting up a stop block system with my saw horses and using my miter saw. This isn't the best set up or very accurate, so I want to get a miter gauge that can help with that and I do plan on getting a miter sled down the road.

Thanks for the help

For plain old 90 degree crosscuts, I don't think any miter gauge is as good as a homemade sled. If you need to do a bunch of crazy angles, then that's a different story.

-- Russ

I have the Osborne and really like it. The preset detents for the different angles are for the most part dead on (once the face of the miter is set to 90 from the blade) and has good adjustibility for a solid fit into the miter track. I still double check things before making a bunch of cuts but overall am happy with it. Probably the single feature that I like most is the size of the miter face. Nice and long providing good support for longer pieces which can sometimes get a little squirley with shorter faces. I don't have any experience with the Incra but am sure that you would be very happy with either one.

I have the osborne as well. Bar has t slot washer and can expand to provide a slop free fit in the slot. You can set it up for either side of the blade and the angled brace keeps the long face rock steady. I find the tape measure scale useless especially on angled cuts, just not worth the time to calibrate it . I have an extra stop so we can set 2 lengths and swap between them as we cut parts.

For plain old 90 degree crosscuts, I don't think any miter gauge is as good as a homemade sled. If you need to do a bunch of crazy angles, then that's a different story.

-- Russ

I agree with the CC sled , I finally made one after years of putting it off . I use it all the time , you can't beat it for 90 degree work .

BTW I have an Incra 1000SE and like that for miter work .

I use an Incra V120 and love the indexing stops for each degree. I have an Incra TSLS fence system for my table saw and Incra router table system - the red "shop stop" works great on repeating cuts and is highly adjustable to dial in a length of cut. The 1000's fence is the same as is on the TS fence and router systems - extruded aluminum, rigid, and you can add additional stops for different cuts that you may not be repeating. I have no experience with the Osborne.

  • 2 weeks later...

Listen to Russ and Jerry and build yourself a good crosscut sled - you won't regret it. I have had an Incra Miter 2000 for about 15 years and its still my go to for cuts other than 90 degrees, but it's lacking in that it only adjusts through about a 95 degree range, unlike all their other miter gauges which adjust 180 degrees. But it has a MUCH beefier protractor plate than all the other miter gauges they make, so it's rock solid. I also have an EB3 (I won it as a door prize), and although it is very rigid because of the 3 point triangular design, I don't like it as much because of the way you set the angles that don't utilize the detent button - you have to align marks by eye - less than precise if you're doing work like segmented turning. In my opinion, you can't beat the accuracy and repeatability of the Incra products. But if your the kind of woodworker that is rough on his tools, then the EB3 might be a better choice since it can probably stand up to the occasional knock or drop better than the Incra.

I have the Osborn but don't care for it. The detent for 90 isn't accurate (could be just my gauge) and anytime I change angles it us a hassle to get it reset. It's not off by much, maybe 1/4 if a degree, but too much to trust.

The big bonus with sleds is there is no drag on your work piece. I use my sleds, 90 and 45, more than anything else.

The big bonus with sleds is there is no drag on your work piece.

One of the big bonuses is no drag on your work piece. But there are so many others:

1. They're as accurate as you care to make them.

2. They act as their own zero-clearance inserts.

3. You can clamp your workpiece to them. This means you can safely deal with oddly shaped pieces, or tiny little pieces that you wouldn't think of cutting with a miter gauge.

4. You can clamp other stuff to them. This means you can cook up all kinds of jigs very easily.

5. You know exactly where the cut is going to be.

Etc.

-- Russ

I have two sleds, an Incra 3000, an Incra v57. What I reach for first is the OEM miter gauge. It's set for a perfect ninety and cuts a perfect ninety. I set it for any angle with this:

post-206-0-71276600-1349446754_thumb.jpg

  • 2 weeks later...

I had the incra 1000se, I actually posted on this forum because for me at least, that thing was a pain in the ass to get set up. And when I say a pain in the ass, I am talking hours of trying with no real success. The problem I have is to adjust the fence to 90 degrees, you have to loosen 3 screws, tap the fence (pray its in the right spot) tighten the screws, (pray it doesn't move) make a test cut to find out your not even close, then do it all over again. At least the osborne has a cam adjustment.

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.