jimmykx250 Posted September 23, 2012 Report Posted September 23, 2012 Any one have any experience with the dewalt 1/4" impact driver- it's the cheapest one they make and amazon has it for around 80 bucks. Never used one but i hear they are a game changer for driving screws. For 80 bucks (tool only) i may check it one out. Opinions welcome. Thanks, Quote
rodger. Posted September 23, 2012 Report Posted September 23, 2012 I have an el-cheapo ryobi 18V impact driver. I have used it to drive thousands upon thousands of screws (decking/fencing/shop/sheds). Most of those screws were 2.5" or longer. If you have never used an impact gun before to drive screws, you will kick yourself for using a cordless drill for so long. Impact guns are to screwdriving what a saw is to cutting. 2 Quote
tim0625 Posted September 23, 2012 Report Posted September 23, 2012 I bought the Rigid combo set - 18v, 1/2" cordless drill and screw driver for I think $179. It's not on the internet, you have to go into the store but it comes with a nice bag, charger, 2 batteries, and lifetime warranty on the batteries. Drill and driver work great and like Franklin Pug said, the impact driver is an awesome tool. 1 Quote
Andrew Pritchard Posted September 23, 2012 Report Posted September 23, 2012 I have a DeWalt set - drill/driver and impact driver. Although I occasionally use the drill for driving (mostly for the torque control), the impact driver is my "go to" for screws. Especially if you are doing a lot of screws like deck building. Your wrist won't get so tried from working against the driver, and I feel like the battery lasts longer, (though I have no proof of that last claim). The only problems are lack of torque control, and the noise. Quote
Jfitz Posted September 24, 2012 Report Posted September 24, 2012 I have an older dewalt drill (14V) which has been a champ, and I recently got one of the Dewalt impact drivers. I like it a lot - yes it is loud as Andrew said but it fits a purpose my regular drill cannot. I believe this is different than the one you are talking about. The points I would look at are size, weight, and the addition of lights to see where you are drilling. I found the impact driver is nice and small, is not terribly heavy, and the LED lights on the front make it easy to see in tight spaces and they also stay illuminated after a trigger pull so I can see what I am lining up. Quote
mds2 Posted September 25, 2012 Report Posted September 25, 2012 I bought the Rigid combo set - 18v, 1/2" cordless drill and screw driver for I think $179. It's not on the internet, you have to go into the store but it comes with a nice bag, charger, 2 batteries, and lifetime warranty on the batteries. Drill and driver work great and like Franklin Pug said, the impact driver is an awesome tool. I bought this and drove two big lag screws like it was nothing the other night. Limited experience but im very happy with it. Quote
pghmyn Posted September 27, 2012 Report Posted September 27, 2012 Our last drills finally gave up on keeping battery life, so my dad bought a Porter Cable set. 2 batteries, charger, Impact Driver, and Drill. 18v. I think he paid $99 on sale from $149 at the time. The reason it was so cheap compared to others was because the batteries are NiCd instead of Li. But they still work, and work great. Quote
rodger. Posted September 28, 2012 Report Posted September 28, 2012 Nothing wrong with ni cad batteries. They are just a bit heavier. If you are not working over your head a lot, the weight is not a huge issue. Lithium ion is superior, but not always worth the extra cash IMO. Quote
pghmyn Posted September 28, 2012 Report Posted September 28, 2012 Nothing wrong with ni cad batteries. They are just a bit heavier. If you are not working over your head a lot, the weight is not a huge issue. Lithium ion is superior, but not always worth the extra cash IMO. There are more benefits than just the weight difference. Longer total life, more charges, holds charge for longer, etc. Quote
rodger. Posted September 28, 2012 Report Posted September 28, 2012 There are more benefits than just the weight difference. Longer total life, more charges, holds charge for longer, etc. Yes, but if you are using it in the shop where a fresh battery is always on hand, the cost for lithium ion is not always justified IMO. I have 5 nicad batteries that are almost 10 years old and have had thousands of recharge cycles. Still in great shape, and some are even protected under a lieftime replacement guarantee (ridgid). Quote
QSmits Posted October 2, 2012 Report Posted October 2, 2012 I mainly use Makita tools, but I have quite some experience with their 18V li-ion impact driver. It is fantastic for driving screws! I bought their most powerful 18V drill a while ago, then I borrowed the impact driver from one of the contractors working on our house when someone had taken my drill. What a difference! Much easier to drive screws to a specific depth (easier to stop) and much less train on your wrist. Especially useful then working high up on a ladder. I'd recommend using torx (or similar) head screws, though.. The normal PZ or PH head screws are easy to strip with a regular drill, but with the impact driver I'm almost guaranteed to destroy those... The downside is that it makes a lot of noise and on really large screws (they used some 14"x1/4" screws to attach the prefab elements of the house) it isn't powerful enough. It just sits there making a lot of noise and vibrating in your hand, but that's where the regular drill comes in... Quote
PaulMarcel Posted October 2, 2012 Report Posted October 2, 2012 The one thing about NiCad batteries is that they are apparently not allowed in the EU. Vendors will move away from them to keep a consistent product line between the EU and other markets. This is why I can't get new NiCad batteries for one of my drills. There are certainly third-parties that sell cells to pop in, but a consideration. Quote
QSmits Posted October 2, 2012 Report Posted October 2, 2012 The one thing about NiCad batteries is that they are apparently not allowed in the EU. Vendors will move away from them to keep a consistent product line between the EU and other markets. This is why I can't get new NiCad batteries for one of my drills. There are certainly third-parties that sell cells to pop in, but a consideration. Strange. Just yesterday I got an ad on the mail from a large DIY store. They have a 12V Makita drill with Ni-Cd batteries on sale. Quote
PaulMarcel Posted October 2, 2012 Report Posted October 2, 2012 Strange. Just yesterday I got an ad on the mail from a large DIY store. They have a 12V Makita drill with Ni-Cd batteries on sale. Well, then I heard wrong mea culpa Quote
QSmits Posted October 2, 2012 Report Posted October 2, 2012 Well, then I heard wrong mea culpa Well, I looked it up. You're right. In the EU Ni-Cad batteries can only be sold for replacement purposes, not with new equipment. Perhaps they're selling off old stock... They've had these things on sale for months now... Quote
rodger. Posted October 2, 2012 Report Posted October 2, 2012 Well, I looked it up. You're right. In the EU Ni-Cad batteries can only be sold for replacement purposes, not with new equipment. Perhaps they're selling off old stock... They've had these things on sale for months now... Things I did not know. Thanks for the info. Quote
TRBaker Posted October 3, 2012 Report Posted October 3, 2012 And they say you can't teach an old dog new tricks. Quote
tim0625 Posted October 3, 2012 Report Posted October 3, 2012 Well, then I heard wrong mea culpa And they say you can't teach an old dog new tricks. And there you have it....one minute you're dancing with the cute girl, and then the lights flicker, your hair is graying and you're the...."old dog". Ain't that an extreme 'Body Check'? 1 Quote
PaulMarcel Posted October 4, 2012 Report Posted October 4, 2012 And there you have it....one minute you're dancing with the cute girl, and then the lights flicker, your hair is graying and you're the...."old dog". Ain't that an extreme 'Body Check'? Dimly lit clubs are my best friend Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.