Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

when to wear a respirator

Featured Replies

Clearly, when spraying finish a respirator is not optional.

If one is applying finish by hand (like brush or wipe on poly), is an organic respirator cartridge respirator necessary?

I always wear one. But my shop isn't that well ventilated. I don't like that headache I can sometimes get from the smell. Call me a whimp if you like.

even in a 3000 square foot shop i put a fan on to blow away fumes. i rarely do harsh finishes sometimes superglue for inlays and finishes that can be pretty harsh. wipe on poly is about the max but it helps.

when spraying or hand-applying high VOC finished (lacquer, etc). Or when cleanup lacquer thinner, acetone, etc.

  • 2 weeks later...

Wear a respirator when what you are breathing is not natural air. Any airborne solids are generally expelled from the lungs over days - exotic wood dust can stay longer due to the inflammation they cause in the lungs and consequently do more damage due to the natural toxins in them. Any fumes/gasses/faint smells of what you're working with, end up incorporated into your blood and filtered by your liver in 30 seconds after breathing. Me thinks a respirator is a good thing. Being with my dad who died of lung complications, shined a light on these issues. I'm with Chet, call me what you like but I'd rather die of old age.

I wear mine more and more as I get older, even for pictures! I just naturally reach for it. The blue nitrile gloves, too...

What's interesting is when you take it off after completing the work. The smell is far more noticeable when it can't slowly build. I figure it can't hurt to put it on, and current models are plenty comfortable, so on it goes...

When I tried to wear my glasses, the respirator, and goggles, there were too many things trying to sit on my nose. So, I switched to a face shield instead of goggles. I find it easier to "suit up" when I start working and leave everything on until I'm done. The only problem is that with my hearing protection on, I can't tell if the DC is on or off.

There are some finishes (CPES in particular) that absolutely require it even if you do have good ventilation. Actually with that one, I force evacuate the garage with a fan since I don't want the fumes finding their way through the garage ceiling into the second-story living space.

I usually spray finishes in the back yard and don't use one there; usually spray water-borne finishes with low VOC. Usually hardly smell them; yes, i hold my breath :)

Burritos. Always after burritos.

Some finishes I really try to use only outdoors CPES, lacquer, etc. I've always considered these to be the 'really bad ones' from a health perspective.

I wear mine more and more as I get older, even for pictures! I just naturally reach for it. The blue nitrile gloves, too...

What's interesting is when you take it off after completing the work. The smell is far more noticeable when it can't slowly build. I figure it can't hurt to put it on, and current models are plenty comfortable, so on it goes...

Heck yeah....my friend at Fastenal got me the respirator by Norton with the replaceable cartridges and it is great. Even when I work with lacquer thinner, there's no smell and the list of what it filters is very long. My boys work at a chemical plant and got me the 'you can play with uranium' gloves. They're always close by.

Beech....what about Norm glasses that are prescription and safety built into one?

Beech....what about Norm glasses that are prescription and safety built into one?

I have considered prescription "sport goggles", but those are expensive. The face shield was cheaper, and provides more protection. And also works if I ever do any turning.

I have considered prescription "sport goggles", but those are expensive. The face shield was cheaper, and provides more protection. And also works if I ever do any turning.

Thanks to the internet, there are several sellers that can get you Rx sport goggles for much less than your eye doctor. I have a pair of saftey glasses that are Rx from http://www.cheapglasses123.com/safety-glasses. I think they set me back about $65-$70. It was a while back, but considering my local Lenscrafters (who I think are out of bussines now???) wanted almost $400, I was pretty pleased. Thankfully I haven't taken any serious blows to the face yet, so I can't vouche for durability, but they are maybe ~2 years old, and I have no complaints.

Oh, and if you have Flex Spending Money you have to spend before the year end, they count! :)

I wear mine more and more as I get older, even for pictures! I just naturally reach for it.

Yeah I tend to reach for mine more often now, also added an overhead air cleaner recently. My asthma has gotten a little worse the past few years (more due to the air quality in Dallas than anything else) and it helps when I blow my nose and it's not black :).

The blue nitrile gloves, too...

Two by two, with hands of blue...

Clearly, when spraying finish a respirator is not optional.

If one is applying finish by hand (like brush or wipe on poly), is an organic respirator cartridge respirator necessary?

When spraying a finish a respirator is totally necessary!!! If using something like a 7500 series from 3M, you must use the organic vapor cartridges AND IN ADDITION the P100 or N95 filters that attach on top of the vapor cartridges.

If you are applying a finish by hand (brush or wipe on), an organic vapor cartridge is still totally necessary, however you NO LONGER NEED a particle filter b/c you are not creating a mist (ie. you can use the organic vapor cartridges alone and do not need to attach the P100 or N95 to the outside of them).

Hope this helps!

EG

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.