Recommended Posts

Posted

I've seen lots of talk online of how block planes are the woodworker's number one plane. But so far, I don't think I've ever seen one used for anything other than chamfering edges. What are block planes best at? Do they work as little smoothing planes? Rabbiting planes? What is the best one to buy?

Posted

Block planes are not really the best at anything but they are good at a lot of things. A lot of people use them to dial in on their miters. They can be used as a shooter. They are good when using edge banding (either the thin store bought stuff or the thick homemade stuff). They can be used as a smoother on small pieces. They are used to clean up end grain. Most people would agree that the Veritas low angle block plane would be the one to get.

Posted

Block planes are not really the best at anything but they are good at a lot of things. A lot of people use them to dial in on their miters. They can be used as a shooter. They are good when using edge banding (either the thin store bought stuff or the thick homemade stuff). They can be used as a smoother on small pieces. They are used to clean up end grain. Most people would agree that the Veritas low angle block plane would be the one to get.

Thanks!

Posted

Block planes are good for planing blocks of course. You know when you have to hide out from the wife in the shop and make a pile of shavings so it looks like you've been working.

Posted

Depends on how you work and what you build. I don't find them particularly useful and sold all mine years ago. I prefer a full sized bench plane for furniture work. If you make a lot of small things you might find them useful.

Posted

I use my block plane constantly for trimming edges to fit. Today I had to cut off the bottom four inches of some windows that had rotten bottom rails. I used my block plane to scribe the replacement pieces to the windows. I use it on doors when I'm trying to get equal reveals around the edges and on cabinet doors when I need to have a consistent 1/16th reveal around an inset door. It's just a handy tool to have for lots of different fitting applications. It isn't intended to be a go to tool for smoothing, jointing, etc., but is great for those little jobs that require just a fart-skin of wood taken off to make it look good.

Posted

If you have never used a hand plane, I highly recommend you try to incorporate them into your woodworking.

I constantly see people asking the question "which hand plane should I get?". This question is very similar to which utensil should I buy. There are many different types of planes just like there are different types of utensils... each with a specific use. A fork, knife, and spoon all have different uses but they are all utensils; hand planes are very similar. Everyone can share their opinion on which hand plane to purchase first just like anyone can share their opinion on which utensil to buy first. Someone who predominantly eats cereal every day may suggest that a spoon is the best utensil to buy first, but this wouldn't be a good choice for someone who eats steak every day.

Woodworking forums are a great resource for information, but sometimes a book on the subject is simply the better way to go. If you are interested in hand planes, I highly recommend Chris Schwarz's book: Handplane Essentials

The book isn't cheap, but it's worth the investment if hand planes are something you want to start using. The book is an all inclusive guide that covers essentially every aspect of hand planes including types and their uses.

Just my two cents!

Posted

Joe,

I'm fairly new to handplanes but I know this much....I reach for my block plane on almost every single project I do and multiple times I've come up from the basement and told my wife, " I don't know how I ever did woodworking without a block plane." I bought a Lie Nielsen low angle rabbeting block plane almost a year ago. I use it for chamferring edges, cleaning up tenons, dados too if they're large enough, shaving off end grain to the line, and sometimes if I'm too lazy to dig out an actual square it works well since I know the sides and sole form a perfect 90 degree angle.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.