tdale51@yahoo.com Posted November 30, 2012 Report Posted November 30, 2012 So, I was cruising EBay tonight and I stumbled upon a really cool looking plane. A Stanley #45. I'm absolutely clueless when it comes to this plane. It looks like it's used for making molding or routing a profile on the edge of a board???? Am I in the right ballpark? Also if anyone has any good resources that cover the "how to's" of this interesting little gizmo I'd appreciate that as well. Thanks a lot. Quote
jwatson Posted November 30, 2012 Report Posted November 30, 2012 this lady is pretty knowledgeable about plow planes etc http://www.cornishworkshop.co.uk/ Quote
nateswoodworks Posted December 1, 2012 Report Posted December 1, 2012 I have a 45 and I like it. I bought it this summer and it has taken a fair bit to get used to but now it's becoming a trusted friend. In straight closed grained wood the results are great but in open grained wood the results can be questionable. I need to get a couple of new knickers as mine are worn down but for now I just use my marking gauge to score the lines first then go to town. The only downside is when you have no choice but to go against the grain. Quote
Vic Posted December 1, 2012 Report Posted December 1, 2012 I I believe I found an old manual a few years back. I'll see if I saved it on my computer. I have two of those. One is a Wards Montgomery and its actually nicer than the Stanley. Both are made by Stanley, btw. As far as I know I have all the blades, too. They're all pretty new. I need to clean them up. They so grooving, rabbeting, tongues, and I think a couple more profiles. I update this sometime tomorrow. Quote
aengland Posted December 1, 2012 Report Posted December 1, 2012 The #45 is a solid (but finicky) tool for plowing groves with the grain--most famously the Tongue and Grove. But it also has knicker for cross-grain dado cuts along with additonal cutters that can make some limited molding cuts--flutes, v-groves, and few rounds. But, the angle of cut can be rather brutal; hence, the skew #46 was deemed the better cutting "gizmo." The 45, bundled with typically 23 blades (or less in the earlier years) including the slitter, can provide some "good" service; but, that often falls short of "great"! Compared to the LV plow, my older 45s just don't perform as well, as quickly. But, I still like my #45. To purchase one complete usually costs around $200. Better deals can be had but beware of missing parts or "buried" repairs. Quote
Vic Posted December 1, 2012 Report Posted December 1, 2012 Sorry, I'm not sure we're talking about the same tool. This is the planes to which I'm referring: Record No. 405 Multi-Plane. They both look the same. The No. 45 Stanley and this Record No. 405. I'm betting the owner's manual would answer any of your questions. Quote
tdale51@yahoo.com Posted December 1, 2012 Author Report Posted December 1, 2012 Thank you for the replies! Vic, we can always count on you to come through with good info! Quote
nateswoodworks Posted December 2, 2012 Report Posted December 2, 2012 One other thing I forgot to mention. One of the main reasons I bought mine is my kids. My son just turned 12 and my daughter is 9, they both love making projects of every shape and size and take pride in being able to do much of it themselves (with me watching over of course) Using a router is completely out of the question at their age as far as I am concerned so enter the #45 and now they can put edge profiles on their work. I tend to grab it more for dado's and such. You can look on ebay to get an idea of the different cutters for the #45, most are very reasonably priced. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.