Recommended Posts

Posted

I am currently working with some poplar, and finding it just amazing to work with.  The only ever time I've used it is to make some face frames.  I feel compelled to use every hand tool I can on it which is a lot of fun. 

 

Now construction is complete and I am at the sanding stage, but instead I grabbed my card scraper and am currently going to town.   My question is, do I still need to sand?  It is fairly smooth, but not like it would be if I sanded to 220.  Am I just wasting my time with my scraper?

 

At this point I'd like to get this project off my bench and move on to the next thing.  So if I can cut out a step that is what I'd like to do.  Thanks.

 

 

 

 

Posted

I do the majority of finish work with a card scraper and finish with a quick all over 220 sanding.  I hate sanding.  Some softer wood tend to fuzz up a bit too much with a card scraper and need to be sanded at 180 or less.

  • Like 1
Posted

I've done a similar thing: get a poplar board and just practice planing and scraping on it. I found that the scraper didn't produce nearly as nice a surface on poplar as it did on just about anything else. I had similar results with a piece of basswood (for chip carving). But the scraped surface is still pretty nice.

Anything to avoid sanding is great with me.

Posted

I am still getting used to the card scrapers. Having been in industry I am used to sanders and they have been the first thing I reach for when cleaning down. I am going to experiment with a scraping plane and see how I fare with that.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.