Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

rebuilding my living room, computer gaming system

Featured Replies

i'm looking to build a custom PC into my living room wall. i want to make it as quiet as possible and since its positioned directly above my houses hot water tank my plan is to run the cooling water down into the basement to a heat exchanger to pre-heat the water before it goes into the hot water heater. it will be powered by a small pool pump. (kiddie pool sized).  I'm planning  on using 4/4 cherry for the main parts of the computer case and the shelves and id like to use white pine for the detail parts like the crown molding under the shelves. These ill stain cherry. my plan is that the cabinet under the window will be used to hold power strips and that the molding around the lower part of the window will be held on with magnets and used to hide the wires for game systems and to connect my computer to the TV.  The space behind the crown molding is for that too. 

 

do you guys think that mixing the white pine with actual cherry will look ok or will it be crazyness?

 

any style changes? im aiming for a kind of colonial style.

 

 

post-13717-0-38542000-1363716953_thumb.j

post-13717-0-34325700-1363716954_thumb.j

post-13717-0-44558100-1363717025_thumb.j

I'd trade the pine for maple.  Pine is only good for framing houses.  I might get in trouble for saying that...but it's true.

  • Author

well i had hoped to buy the trim boards all premade I have a small router table but not many bits and nothing big enough to make crown or anything. maybe i could shop around a bit and find them in maple but I don't have a huge budget for this, do think the difference is big enough to really worry too much about it?

It's all personal preference.  Some people like pine.  I don't.  It's challenging to finish, though, I'll warn you.

 

Find a hardwood dealer and chances are they'll carry a selection of millwork in a few different species.

Hi Compufobia

 

How much experience do you have? Have you used hardwood much before? Are you likely to make few mistakes along the way?

Depending on you your skill level pine might be ok. I would agree for sure with Eric that hardwood would be way nicer, but pine will be forgiving and you are not going to cry if it goes a little wrong. I don't mean any of that to be rude in any way and if your skill level is good, go for hardwood if you can afford it. 

  • Author

nope none taken, id say mistakes are likely, ive been at it a while but im certainly not as experienced as i'd like to be. most of my wood experience has been in framing and concrete forms. all in all Im looking at the old thing of KISS, keep it simple stupid.  ive got a lot f things in this project all coming together at once so the simpler the better. i saw at home depot they have outside corners premade and many of the other little pieces there so my plan was just to use those.  as long as they are not so ugly that i end up having to throw them out and doing it over. thank you very much for your input so far. 

Comp, you've got my creative juices flowing now. What a neat idea, to make a computer case out of wood and glass. Hmmmmmmmmmmmm.........way to go.

This is a great project!  

 

Don't forget that wood acts differently with electricity and heat, than a typical metal and plastic tower.  In many cases, the components grounds to the case through their mounting screws.  So, make sure that your components are mounted to metal, and not wood.  Also, while a water cooled unit is much better than air cooled, most of the time, the cooling unit is only cooling the CPU.  Your other components will need to be in a well ventilated case that is moving lots of air.  Wood insulates much better than plastic/metal towers, so just compensate with additional/more powerful case fans.  

 

Good Luck!  Be sure to share pics when you are done!

Good tips from Chris, make sure your appliances are vented. 

 

Don't worry about using off the shelf components. It's a nice way to take away some of the stress on early projects. For instance we don't make our own turned stair spindles, we buy them.

 

Sounds like you were a shuttering carpenter by trade. Really interesting profession, never done anything of any scale myself.

 

As well as Kiss try the 7 Ps Proper Planning & Preparation Prevents Piss Poor Performance  ;)

 

Keep us updated with the project.

Also, keep in mind that most liquid cooling systems want some degree of additive mixed into the water to act as a lubricant / anti microbial agent / etc. Obviously, you're not running a closed-loop system so that may not need all of those benefits, but you may want to do some more research.

 

I'll second Chris H's comments - you'll still need a case fan (or two) and a good grounding path. You may also want to work in ways to reduce EM interference - apparently the metal case & fan grilles reduce this, and you lose that with a pure wooden case. That's why many people that do this actually buy a cheap, barebones PC case (sometimes just the frame and hardware itself) and build a wooden frame over/around that.

  • Author

I've built quite a few custom computer cases so i feel pretty confident there, I am hoping to go completely fanless on this one, but it will have some passive grounding and cooling parts built into the inside. mostly made of machined aluminum, ive never had much of a problem with Interference but i suppose its something to keep in mind.  I built a computer in a racing tire once and i would imagine that to have nearly the same properties or worse than wood. I plan on running a either just water with a bit of bleach in it in the cooling loop or ive got a friend that works in a lab that can get me clear glycol that i can run in the cooling loop if i have to. I built the heat exchanger in such a way that it limits the possibility of any kind of crossover between my drinking water and my cooling water to a level that I'm happy with but id still prefer to lower my risk of terrible stuff getting into my water.  I do want it to be clear though because the water after coming through the cpu,video card and possibly memory cooling blocks is going to pass into the glass tube on the left and wash over that Galileo thermometer  before dropping back down to the basement.  I also plan on putting a small air pump in there wired to an optocoupler and my HDD LED to make it blow bubbles up through the coolant whenever the hdd is accessed. its quite a bit more work but I think the payoff is going to be worth it. Im also considering working a small fire extinguisher into the top of the case with a fuse link and a spring so that if for some reason it does ever catch fire it will put itself out.  Ill just have to see what I have for room though.

  • Author

i talked to a friend of mine who is a carpenter and he thought that id have a real hard time with cupping and bowing using this type of setup.  he recommended using plywood with a wood face or ripping the shelves into strips and flipping every other one and re gluing them together to make a panel.  what do you guys think?  if i cant do the shelves out of whole wood can i get away with at least just doing the computer that way?

He does have a point, but I think your build should hold them flat.

Ripping the boards is to narrow strips does in principle make a more stable item as the natural moisture movement works in opposite directions. However if the wood is damp or cold one side and hot warm the other they will still bow. 

What's the motivation for the piece? If it's a well made and functional piece built in the spirit of a skilled fit out carpenter/joiner nothing wrong with plywood with a lip, it would be more stable and would look fine. The fitted wardrobes in my house are simple painted affairs with mdf in there too. Not every project has to be fine furniture. Most people would struggle to fit out a house to a fine furniture standard before they had to move house.

If you want to make it like a cabinetmaker (see eric1978s cabinet in project journal) take the time to use solid timber and traditional joints.

For me the project feels joiner/carpenter skills, but it's your project. Go for what feels right and if it ends up wrong no stress, stand back, reflect and go again.

  • 5 months later...
  • Author

So, Ive been plugging away at this and figured I'd post some progress.  I'm nearly ready to begin finishing I think, if "finishing" includes tons of sanding.  I'm a bit terrified of that, Ive had a hand full of finishes that ive been happy with but none that ive been thrilled with, hopefully this one comes out better than most

also, if anybody's interested they are welcome to join my FB group and check out some of the other Weird crap I'm Building your welcome to it.

 

1146211_3430276933813_2013903631_o.jpg1167557_3418489519135_2123361816_o.jpg

  • Author

Thanks, its mostly 4/4 cherry, this is the first time i've worked with it and so far i love it, has been a dream to route and almost glows when sanded.  the back panel is made of white pine, I used the old c clamp a board over my table saw to make the raised panel trick and i'm pretty happy with that, the balusters are oak I just bought them at a  big box store.  Its starting to look like a thing.

Love wooden computer cases! Actually made one myself. Heat and grounding are really not that big of a deal. I believe the only reason that a metal case is grounded is so you don't get zapped if there is a short in your system and you touch the case. Otherwise all the components share a common ground. A fan or two will be all you need to move a little air in the case since you are wc'ing.

Question about your water setup. So you are going to have water circulating from your homes water supply? I've heard talk about that but never seen it myself. Personally I think a closed loop would be ideal. Circulating unfiltered water is not going to be good for your components. I would guess that the water deposits will clog your heatsinks in no time. May be wrong though. I just used an kuhler 620 and it keeps my htpc plenty cool.

Anyways, sorry for ramblings. Hope to see some more progress soon! And you should post this in the case mod section of overclock.net!

  • Author

Thanks, yeah itll be a closed loop circulating through a heat exchanger I'm not sure about what i'll use for coolant yet, but I think a mix of windshield washer fluid and water maybe with a bit of extra alcohol added to it.  I have done akll i can to make sure that the coolant can never mix with the water supply but I still want to keep it non toxic just in case. maybe i'll check overclock out too.

  • Author

Just finished putting the third coat on, so far the best varnish i think I've done. using Hellmans Spar Urethane cut down with mineral spirits and wiped on with a sponge. Then I used 400 grit paper to sand between coats, I'm very happy with how its coming along so far, by far the best finish ive done yet.

 

1277638_3468165721009_2087565464_o.jpg1269696_3468165441002_1441676050_o.jpg1278953_3468165841012_759960887_o.jpg

I haven't used a sponge for that but, I like the results!  Nicely done!

  • Author

Thanks! They were little finishing sponges, had like peach fuzz on one side, I got them at Mardens for 2/ $.25, they seemed to work fine, but I'm pretty sure they are a one time use sort of thing.

  • 3 weeks later...
  • Author

Just another update, I got the door hung and the glass in it, I think its nearly ready to hang the whole thing in the living room and plumb up the coolant pipes. sorry the pics came out a bit fuzzy, apparently I was jumping on a pogo stick while taking the pictures, who knew.

1292874_3527299079306_1645297538_o.jpg1374877_3532085758970_1660299586_n.jpg166029_3532085998976_1337584049_n.jpg

Fantastic idea & no worries on the pictures - compared to mine they look like you hired a pro.  Looking forward to seeing more photos & updates.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.