Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Shop Cleaning Day! (before and after)

Featured Replies

No projects going this weekend, so I decided to spend some time cleaning/reorganizing the shop. Usually I will clean it up really good before a big project. Then I'll do a series of various smaller projects that I've been putting off for too long or I try to finish or repair other projects that have been shelved. Thought it would be fun to post some before and after pics... 

 

Before:

post-13786-0-80274400-1370818868_thumb.j post-13786-0-51659300-1370818869_thumb.j post-13786-0-55495900-1370818870_thumb.j

 

After:

post-13786-0-10984700-1370818866_thumb.j post-13786-0-77941100-1370818866_thumb.j post-13786-0-76594400-1370818867_thumb.j

 

 

 

And here is a storage solution I came up with:

post-13786-0-53669300-1370818871_thumb.j

 

Top shelf is jig storage, next is jig material, next is unfinished projects, bottom shelf is miscellaneous material.

According to my wife, if I had a 'shop cleaning week', I could just about make your 'before' case :)

  • Author

I dread cleaning day....more dust gets kicked up than during a real project! Every time I clean the shop, it also turns into a big re-organizing project too. I think of about 15 things I need to build to solve my problems. Next on my shop build list is a storage area for all the little pieces of hardware I've accumulated. I plan to hoard little nuts and bolts and screws for years to come.

==> everytime you go in shop put 10 things away

 

that's not the problem....  the problem is that i take-out 20....

My current project is my hand tool cabinet.  I ended up having to just about completely rip my shop apart to make sure I had room to get the wall cleared off (including taking down an unneeded cabinet) and to get the hand tool cabinet up.  I am by no means a clean freak (quite the opposite actually) but I can't stand my shop being out of whack.  So as you did this weekend I did as well. 

 

There is nothing like having a clean shop so you can mess it up again!  :)

my shop is the size if a closet so if I don't put everything away I cant even turn around. cant afford to be messy.

I have a very narrow shop, and every recent project has been on the larger size. I cant count how many times i had to push the bandsaw and cabinet saw down the back hallway. Right now i am laminating a 12' long mahogany back bar top and my shop is in complete shambles. Everythings is piled in hills along all the walls. Hopefully after this project i can start the full demo so i can insulate the garage in preperation for next winter. I also have a snapon toolbox that is over 7' long that i am considering selling to supplement shop funds and open back up a large part of the wall.

Was thinking about a tidy up this weekend while almost finishing the weekend wall shelf project. Have decided most benificial change in my garage would be an additional small bench for bench top planer/thicknesser/mitre saw with shelf under so I can use top to 'extend' my main bench. Also got lots of small offcuts to add to kindling...nice to know I'm not alone in needing such tidy ups.

  • 3 weeks later...

I have a rule - finish a project, clean the shop.  Once that's done I get to sit on my work bench and admire my shop for a few minutes before I mess it all up again.

When I can fill two plastic carrier bags with wood shavings and assorted detritus it's time for a clean and vac - Rob

  • 2 weeks later...

My shop is a closet (ok, outdoor "shed") that doesn't have room to be cluttered.  (So of course it is.)

 

would love to have even a quarter the storage space you've got there, Daniel, but it looks nice!  I did build a storage shelf out of 2x4 and OSB once at a previous house.  Planned on taking it with me when I moved.  Thought I had everything taken care of, but the darn thing wouldn't fit up the stairs.  (The height of the access at one end of the stairs was larger than the rest of the stairwell... so rather than wedge the shelves in place, I left them.)  But I turned the 2x4s on edge, rather than face like you've got.  (I also went with a butt joint, rather than lapped like you've done.)  How's the structural side of that shelf holding up?  Any sag?  Racking?  Concerns?  (If not, then I know I did it wrong.)

  • Author

My shop is a closet (ok, outdoor "shed") that doesn't have room to be cluttered.  (So of course it is.)

 

would love to have even a quarter the storage space you've got there, Daniel, but it looks nice!  I did build a storage shelf out of 2x4 and OSB once at a previous house.  Planned on taking it with me when I moved.  Thought I had everything taken care of, but the darn thing wouldn't fit up the stairs.  (The height of the access at one end of the stairs was larger than the rest of the stairwell... so rather than wedge the shelves in place, I left them.)  But I turned the 2x4s on edge, rather than face like you've got.  (I also went with a butt joint, rather than lapped like you've done.)  How's the structural side of that shelf holding up?  Any sag?  Racking?  Concerns?  (If not, then I know I did it wrong.)

 

I made some osb shelves in the garage that were 8' long and 2' deep and I turned the 2x4's up on that one. I turned the 2x4's on this one flat because it was only 4' long and also to gain 2 inches of access for taller items. so far there's no sag, but there's nothing too heavy on it. I also added a couple of diagonal braces in the corners in the back to prevent racking. So far, so good.

I have a rule - finish a project, clean the shop.  Once that's done I get to sit on my work bench and admire my shop for a few minutes before I mess it all up again.

 

Ditto.

That's funny, I do the exact same thing.

A clean shop sure is nice...for those 10-15 minutes that it stays clean!  I try to clean up after each project, but what do you do if you have several projects going on at once?  :rolleyes:

I really can't handle a messy shop, messy anything for that matter.  What feels messy for me would probably be "good" for most people.  I typically clean up and put tools away as I go and some things still accumulate, so I usually clean up a little when I am done working of for the day.  It is amazing how much cleaner things stay if you just do it for 10-15 minutes when done for the day.   Periodically I still have to dedicate some time to deep cleaning, but it is never too bad.    

 

I have been accused of being a be "obsessive" about organization, but what can I say it just makes me feel better and its so much easier to work.  I am also on a continuous quest for better organization and storage.  

 

Josh

I will be in the middle of a project, and i will feel compelled to take shop vacuum break. Whats that all about?!?!

So I've got two weeks off coming up (finals this week, and it'll be two weeks until Fall semester starts).  So I can finally get to the shop for some brief time.  First thing on the list is a cleanout.  Kinda difficult, since the first thing you see when you open the shop door is the bench top.  (I have to prop it against the sawhorses to close the door.)

 

First day of the break will probably be a cleanout day.  (Depending on weather, of course.)  Then there will be a day of spider and bee chasing, so I can reclaim my shop.  Finally, probably a day of organizing.  By this time, it should be close to nice weather to be able to finish that "college table" build I started in April...

 

you know, I don't think I've ever been this excited by a class break before...

  • 3 weeks later...

I will be in the middle of a project, and i will feel compelled to take shop vacuum break. Whats that all about?!?!

I kind of do the same thing. Clean as I go. I'm not sure what that means. LOL

I typically clean each day during a project and then do a deeper clean when the project is finished. 

I clean my shop when the wind is blowing over 20.  It has big doors on the front and back, and is on top of a hill that accelerates any available wind.  I'll open both doors, start at the windward door, and use an electric leaf blower to get any dust airborne.  The wind carries it out the other door.  No neighbors anywhere close, or even in sight.  I do the same thing in the barn.

 

I always did this in houses I built on the lake too.  Open all the windows on the windward side, and just the windows in the room I was cleaning on the lee side, except I used the air hose instead of a leaf blower.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.