Recommended Posts

Posted

Matthias has a lot of projects that many with discipline to save for professional tooling might scoff at. His ingenuity however cannot be denied. I was really taken by his pantorouter design initially. Since he posted this recently I think that this mill concept has more appeal to me. I am not certain he really gains anything over a traditional bandsaw with such small logs however. Do you think a homemade mill like this could be made with integrity in a big enough size to make it more beneficial without exceeding the threshold where you would simply buy a mobile mill?

Posted

This guy is very creative and ingenious. How does he do all this? Its horrible thing to say but I don't see how you could make money from this? Does he sell plans for his creations or is he a passionate individual who likes to share his creations?

 

I think on the question of could you scale it up, well yes, why not. Would it be worth it? Most likely not. By the time you have invested money in making it and your time it would of been quicker and better value to find someone with the correct machine and pay them to prep the stock for you (IMO). 

Posted

He must not have a bandsaw.

I guess it depends on what type of woodworking he does?

 

A short time ago I was looking at videos of those who made their own lathes with a hand drill.

 

 

 

Posted

He made his own bandsaw (or two.) I think this is one of them turned sideways. That is why it has a deep throat but not a wide cut. He shows how his all wooden bandsaw deflects less than a cast iron saw. Yes he does sell his plans. Woodgears.ca I know little of motors in some key areas and even less about bandsaw mill blades but his lam beam saw seems labor intensive but cheap. Just got me thinking. I would not invest in building a mill for logs I can easily run through a traditional bandsaw with some help from feed tables.

Posted

I have followed Mr. Wandell's website for a while now, and I get the impression that he does most of his projects to meet some particular need. However, I'd say he does just as many, like this sawmill example, just because he has a curious mindset and likes to explore the possibilities.

Sure turns out some interesting stuff, don't you think?

  • Like 1
Posted

Instead of guessing, why not go to his website and get informed:

 

http://woodgears.ca/

 

Like highlander, I've been following him for a while.  He does sell the plans for the tools he builds, he sells a big print program and he sells a gear generator program.  He offers a weekly blog post (or two), designs tools to fit his needs and updates them periodically.  His personal story is kind of interesting too.

 

Am I a fan?  Yep, a little bit.  Go check it out.  I think you will be pleasantly surprised.

  • Like 1
Posted

Really pretty cool, I knew a guy who built a little wide belt sander with wood and aluminum. The value in this is not what it does but the satisfaction of making a tool that makes lumber. Considering vibration and deflection of wood it is impressive that this saw cuts and tracks at all.

Steve

Posted

I have been following him for some time as well, and at the risk of sounding like a stalker, I can give you a little bit of the background I have found from his website.

 

He was an engineer for Blackberry (I think it was) and he was able to retire pretty early and make a good enough living off selling his plans. He was always interested in woodworking because his father did it full time, so he is familiar with the machines. He is cheap, and if he can build a better machine in a reasonable amount of time, he will. He was several bandsaws, and other amazing homemade machines.

 

I'm sure he doesn't need to make a living from selling his plans, but it helps. Most of the work he does is just experiments and trials for various things like joint strength, glue strength, tips and tricks, etc. In the end, it is all for fun.

 

He can come off as a jerk to a lot of commenters on his videos.But, if you read the comments that he comments on like that, you can understand most of the time why it was reasonable. And like he said, he is his own boss. He doesn't need to answer to someone for giving "bad customer service" when the customer is completely helpless. Coming from working 4 years in customer service at a drug store, I wish I could have told off a few of these customers. But, in the corporate world, the customer is always right.

  • Like 2
Posted

I've looked at most of his videos and never got the impression he is in it for money.    Factoring in the "cost" of his time, he probably could buy most of the machines he builds.   But then again, if you factored in the cost of my time I would never build anything, never paint a wall, never fix a toilet, never really do anthing other than work my day job. 

 

I think he is quite a funny guy.  He doesn't suffer fools lightly and that is apparent in his replies to youtube comments.   He is constantly hounded by safety police and people who just don't get what he does. He also doesn't get caught up in conventional woodworking wisdom. 

 

The best line in this sawmill video: "It works, so it must be safe."  I played it for my brother in law, who is not a woodworker, and he was cracking up. 

Might pucker a few lips here when I say that I hate the safety police. Anywhere. Seriously, do these people really think that saying, "You shouldn't do that." is going to change anything? If you don't like it, don't watch it, and go watch some My Little Pony.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 32 Guests (See full list)

  • Forum Statistics

    32k
    Total Topics
    437.5k
    Total Posts
  • Member Statistics

    26,007
    Total Members
    3,644
    Most Online
    FurniCore
    Newest Member
    FurniCore
    Joined