Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Getting a dye to penetrate

Featured Replies

Hi guys, I have been trying to get some great dye I have to penetrate several 1/8" strips of red oak. I need the dye to literally penetrate all the way through so when I laminate the strips of different color dyed wood together I can get the "Dymond Wood" effect when I cut into them and sand. I have put at least 20 coats of dye on today yet once it dried fairly well and I cut into one, the dye didn't even make it 1/32" into the lamination. Any ideas on how to get this to change or what I am doing wrong? I did sand the wood so it was ready to soak it up, and this was bare wood, nothing ever applied to it. Is there better hardwood to use for dye penetration?

 

Any info would be great!

 

 

Perhaps make thinner veneer if your getting 1/32" penetration than 1/16" veneer might be enough.

==> literally penetrate all the way through

 

​alchohol-based dyes penetrate the deepest... But it's usually only about 3/32 to 1/8 depending on species.

 

There is a company (forget the name) that sells wood grown hydroponically with colored water...  The harvested lumber is colored all the way through.  They demoed at WIA a couple of years... It was cool, but probably only of much use for turners...

Put the strips and dye in a container you can pull a vacuum on. Have the strips completely submerged with enough air space to prevent the dye from getting sucked into your vacuum pump. Let it soak that way overnight, then drain and dry for a few days.

==> Put the strips and dye in a container you can pull a vacuum on

 

I completely forgot about that... I've used vacuum for resin, but didn't think about color... Great...

Starting with super-dry wood, then using the vacuum, should make the dye penetrate well. Just make sure you apply enough. I would think you would almost have to have the wood floating in the dye solution to make certain it achieved full penetration. Wdwerker hit it right on the head.

My dad does this for making knife scales.  He just puts them in a mason jar full of dye and leaves them there until he needs them.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.