Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The wood is to blame, right?

Featured Replies

Novice here making shop furniture out of softwood to learn woodworking skills before moving on to hardwood. So far the shop cabinets I am making are turning out well except I am experiencing a lot of tear out during many steps of the build despite being careful and taking precautions along the way.

The wood is "white wood", the cheapest construction lumber you can buy at Lowes. Purchased the cheap stuff not only because this is a practice project, but also because they are only shop cabinets.

Is construction lumber particularly splintery and hard to work, or is the tear out just a sign of my inexperienced hands? Trying to figure out if I need to learn more skills before moving on to more expensive wood.

Thanks!

Really soft and lots of "space" between the grain leads to tear out.  It's really difficult to avoid tear out on soft woods except for leaving a little extra thickness to sand on the finished product.

==> Trying to figure out if I need to learn more skills before moving on to more expensive wood

 

Don't know your budget...  So ignore me if I'm off base.

 

I prototype, build jigs and some shop furniture out of Poplar.  It's plentiful, machines well, and would provide a more realistic experience than 'white wood' (what ever that is).  Not knowing what 'white wood' costs, I will predict that poplar would be more expensive, but maybe not strikingly so....

 

I would also suggest you build a relationship with your local hardwood dealer.  He can source poplar very easily and probably cheaper than a box store.

 

Another source not to be over looked...  The local cabinet shop...  It's well worth building relationships...  When I got started, I sourced my initial hardwood purchases through a local cabinet shop -- he simply added my bf to his order... Win-Win for both of us...  You could ask to pick-through his scrap pile :)

+1 ^^^

 

Get some poplar or other cheap hardwood.  I can get red oak for $2/bf.  That's gonna give you a much better idea of how "real" wood will respond under the knife...and your shop cabinets won't dent if you breathe on them wrong.

 

That said, if you have sharp tools and sound technique, you shouldn't be getting too much tearout on that pine.  The stuff is impossible to chisel because the fibers just compress like you're trying to cut into a sponge.  But I get clean results out of the jointer and planer, save for the gnarly, knotty areas.  You may need to make sure your blades aren't dull.  Not sure where else you're having problems...if you back up your crosscuts it's physically impossible to get tearout there.

 

Bottom line, don't use SPF from the box store unless you're framing a house...that's all it's good for...not even practice. :)

  • Author

Thanks all, I think I got the answers I was looking for. The cabinets are nearly finished, so that project is cooked but the next project will definitely be hardwood.

Planing, jointing, sawing all went fine. Problems more with routing, chiseling, end and cross grain trimming. Here is a picture of some dovetails I attempted to trim with a new out of the box LN Low angle block plane. Looks like hell. :-)

post-14334-0-59836600-1385468643_thumb.j

  • Popular Post

Chiseling and planing end grain on super-soft wood like that is a fool's errand...just doesn't work.  It's like trying to plane shag carpet.  Getcha some hard(er) stuff to play with. :)  All things considered those DTs don't look half bad, especially for shop furniture.  My grandpa was a professionally trained cabinetmaker and some of his dovetails were worse than that...of course his were usually hand cut...100 miles an hour.

Christopher, on that Spruce (white wood), you would probably be better off using a sanding block with 80 grit paper to flush those tails to the surface.

  • Author

Christopher, on that Spruce (white wood), you would probably be better off using a sanding block with 80 grit paper to flush those tails to the surface.

Thanks or answering the question I forgot to ask. Once flush I will work through increasing grits. I once heard a wise man say "you should never skip your grits".

Novice here making shop furniture out of softwood to learn woodworking skills before moving on to hardwood. So far the shop cabinets I am making are turning out well except I am experiencing a lot of tear out during many steps of the build despite being careful and taking precautions along the way.

The wood is "white wood", the cheapest construction lumber you can buy at Lowes. Purchased the cheap stuff not only because this is a practice project, but also because they are only shop cabinets.

Is construction lumber particularly splintery and hard to work, or is the tear out just a sign of my inexperienced hands? Trying to figure out if I need to learn more skills before moving on to more expensive wood.

Thanks!

 

Like Eric says they aint half bad.

 

FWIW I really like pine, picking some good stuff is the key which is much like any other wood. My bench is made from European Redwood, my tool chest is Eastern White Pine (EWP). EWP is so forgiving to work with, the only issue, like you mention, in when paring to the baseline breakout can happen. On through DT's use a coping or fret saw to remove as much stock as possible and pare the final bit of waste away. All of the other cuts should be off the saw with no paring. Keep the chisel very sharp, perhaps even lower the honing angle too. I usually find most pines yield very nicely to a decent #4 although 80 grit is also a good shout.

Also FWIW I'm no fan of Poplar. 

 

c309ceb5d22ba9062c508008bfa7787e.jpg

  • 3 weeks later...
  • Author

Hey, so thanks all for the suggestions, I think they worked out well. Used a flush trim saw to get most of it then leveled it out with 80 grit sandpaper. Left with only a little tear out, acceptable for a practice project. :-)post-14334-0-55594600-1386902334_thumb.j

Hey great work on those cabinets and very brave choice with those dovetails for a beginner !!!

Please don't get discouraged with your material, looking at your first picture the wood definitely belongs to the pine family Douglas firr or sitca Spruss but I can't be sure. it's a great entry level material because of the price and the fact that it's so forgiving its easy to repair small mistakes.

Tools and technique are very important when dealing with less dense woods ( not all soft woods are soft and not all hard woods are hard they are just terms do describe the climate and region they grow in but that's another discussion ). Make sure your tools are sharp most importantly, try to use some sort of marking knife when marking your lines instead of a pencil this will sever the fibers on the cut line where tearout is most likely. Until you gain more confidence with your tools try to cut 2 or 3 millimeters away from the line and pare down to it with a chisel and also try to work from the outside in when parring for example when removing material from the base and sides ( shoulders and cheeks ) of your dovetails work from the outside face to the centre and then flip the pice and repeat the process. The same applies when plaining end grain, work from the outside in to the middle and angle the plane slightly so it's more of a slicing action than a chopping one.

One last thing these techniques can be used no matter what the species of wood you are using.

Keep up the good work and happy woodworking :)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.