Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Shop heater

Featured Replies

Anyone know how much room you need in front of one of those tube looking propane forced air shop heaters. Im thinking about picking one up to help warm it up in the morning. The shop heat does fine all day but we start at 3:45am and turn the heat down at night so its pretty darn cold and takes awhile to get warm.

Most recommend 15+. If you don't have it in a straight line, tack some tin to a half sheet of ply and redirect the gas flow. Be prepared for a big jump in humidity.

  • Author

Most recommend 15+. If you don't have it in a straight line, tack some tin to a half sheet of ply and redirect the gas flow. Be prepared for a big jump in humidity.

 

Didn't think about that, thank you. I think I will just buy another electric. 

I've used one for a long time.  I've never thought about an exact distance.  I'm sure you have plenty of room from seeing pictures of your shop, and have enough common sense to figure it out quickly. 

A couple of years ago, when the previous one wore out, I had a hard time getting one that worked. They all come from China now, as far as I know. I went through every one on the shelf in Tractor Supply, and none of them worked.  I finally ordered a "Factory Reconditioned" one off ebay, and it's worked like a charm for two Winters now.  I figured they just sent the ones that people like me bought, that didn't work, back to some factory service place in this country, and they knew how to fix them.

 

The one I have is a Mr. Heater Contractor 30,000-55,000 btu. and I like it better than any I've had before.  Most are made in the same Chinese factory and just painted differently, but this one is a bit different, and I haven't seen any others like this with different paint.  The factory reconditioned one was a few dollars cheaper, no sales tax, and free shipping off ebay.

 

I'm using it now in a 20x20 room with a 12 foot ceiling to warm it up first thing in the morning, and when we get back from lunch.  The room just has a sheet of 6 mil poly over the door going out into a cold space. One 20 lb. cylinder was last filled up three weeks ago, and may last this week.  I just run it until we feel the need to take our coats off, which doesn't take long at all.   It has run more than a full work day at another site, but I can't remember exactly how much longer, on one 20 lb. cylinder. 

 

I wouldn't want to be without it.  No electric will warm the place up as fast, and it's good for cold hands too.  Just running it for 15 or 20 minutes a couple of times a day hasn't hurt humidity at all.  We have finish wood in there that we are keeping a close check on anyway, and no thousandths of an inch of movement in any wood yet.

  • Author

Thanks I have electric and it does a good job but it sucks being bundled up waiting for it to get warm. Now that Im paying two guys Id rather have them working rather than complaining about being cold for the first few hours.

 

My shop is not insulated I wonder if that would make a difference as far as humidity goes.

Don I believe the humidity is from the exhaust gasses of the torpedo heater. Insulating your shop might just hold more of it in :)

Why not get your electric heaters on a timer?

  • Author

Don I believe the humidity is from the exhaust gasses of the torpedo heater. Insulating your shop might just hold more of it in :)

Why not get your electric heaters on a timer?

 

I have an electrician coming out tomorrow to explore some options. I'll ask that may be a better idea.

For sure, I'm an early riser but, WOW, that's early!

I have a small one 40,000 btus.  I only need about 5 feet in front of it.   Saturday I was using it in my uninsulated garage when it was 0 degrees outside with a -20 windchill.  After about an hour it was 55-60 degrees and after a couple more hours it was 80 degrees.

 

My dad uses a 250,000 btu in his shop to heat it up, then he switches on the electric heater to keep it warm. 

The constant up and down of temperature may cause humidity as well.. don't raise the temperature to fast or tools will get wet..... RUST.

I have one and it depends on how high you set the heat flow. Generally I leave about 6 feet clear from the hot air exit when on the lowest setting 35kW or 171000 btu/hr.

It goes up to 82kW on high (or 281000 btu/hour) and is very hot at that setting. I would leave a good 10 feet away from the exit on high power.

  • 2 weeks later...
  • 3 weeks later...

I've used them before and had to rely on one recently when my shop propane tank ran out for the hanging furnace. 

 

There are a few downsides to those:

 

1. They do not vent outside so you are breathing the carbon monoxide coming off that thing can get real strong real fast. 

2. My pressure valve recently froze over while in operation and let the tank dictate the pressure which resulted in about a 20ft flame coming out of the front of the heater. 

3. Referencing #1 headaches..( literally ) 

 

I remember my dad used to have kerosene force heaters and I don't ever remember having headache issues like with propane. Not sure why or if I was just too young to care. Something that I have done with my propane heater when I used to use in my garage was to set the garage door on top of it so it was always pulling fresh air from outside while it was running. 

I use a chimney style kerosene heater in my garage shop.  Have spent many hours working in the shop with it going, and have not experienced a headache from it.

I run one of these in my 35x55 insulated shop , it's not real tight theres plenty of air leaks . http://www.globalindustrial.com/p/hvac/heaters/kerosene-propane/50k-80k-lp-convection-heater-246645 . I  don't get any smells from it , run it with a 50 gallon tank .  Depending on the temp outside I get the shop up too 65 -70 .

PB, don't wait. Insulate. 

 

Install a ductless mini with heat pump. Then your guys will be working all the time with no excuses and it will pay for itself fast.

A friend of mine has a ductless heat pump. It's pretty sweet but he paid a mint for it. I'm not 100% that thing is designed for a dirty dusty wood shop. 

 

I have one like this ( could even this exact one ) 

http://www.northerntool.com/shop/tools/product_200577751_200577751

 

I can heat a 30x40 shop from below freezing in just 5-10 minutes. The coldest I've been out there was -10 and I was able to keep the shop at a very comfortable 65 degrees. Mine runs on propane and uses a double ducted exhaust. It pulls fresh air in one side and dumps the carbon monoxide out the other. 

  • 2 weeks later...

Late to the party here.

 

I use a 250,000 btu LP unit in my 30 x 75 x 20 shop. It is on a plug in thermostat, you plug the thermostat into the wall and the heater into it then the thermostat turns the heater on and off as needed. I keep the thermostat set to about 68F and it will warm the shop from about 40F to temp in about half an hour then kicks on for about 8 to 10 minutes every half hour or so.

 

This has been a VERY mild winter, I have not used it at all this year, I have a couple of the "tree" style patio heaters, I just put one on low in the location of where I am working and that has worked this winter. I do have 3 ridge vents that make up about 35% of the total ridge of the building, they are very effective at venting the shop, a inch or two under the 10 x 10 door (roll up) to supply make up air and I have yet to get a headache from either heater setup.

 

The shop is 100% insulated though, including all the doors, this will keep the shop about 15 deg F either warmer or cooler than the outside air without any heating/cooling at all. It is pretty handy to open the vents in the summer and let out some of the heat high up when it is 100+ F outside.

 

 

I have an electrician coming out tomorrow to explore some options. I'll ask that may be a better idea.

 

 

Programmable t-stats are so cheap nowadays, and lots of utility heaters have the provision to use them with very simple wiring.

callblacksmith can you share more about this thermostat you are using? I have a mercury thermostat and it's annoying and offers no swing temp adjustments, so it kicks on and off frequently vs programming say a -2 degree kick on cycle. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.