Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Resawing a slab near st louis?

Featured Replies

My friend has an oak slab that his grandfather cut with a chainsaw. It's approximately 2' x 3' x 6". We don't have the tools to do anything with it (too wide and thick), and he'd like to get two 3ish" thick slabs if possible. Anyone know of a place in the St. Louis area that could resaw it? I tried Hibdon Hardwoods, and they said they don't do that, and they referred me to Fehlig Brothers. I've emailed them but not gotten a response.

Thanks.

How about a rip panel saw?  Mark a center line down the whole slab, grab a six pack, work from both sides, take turns making slow progress, have some laughs.  By the time you and your buddy finish the six pack you should be through it.

 

I don't know of any place around here that can do that...of course I've never looked.

  • Author

I don't imagine a business would keep going too long taking a six pack and all day to rip a board.

Most places with a 24" resaw capacity would not take the risk of cutting such a relatively small plank. They would be cutting up entire trees, and big ones at that!

A very sharp handsaw and trading off when you get tired is the best idea . Maybe a couple of saws so they don't get too hot from constant use. The six pack is just to lure the extra help !

Or get a big chainsaw and take a chance on getting the cut fairly straight with that.

I bet the 2 pieces will move, cup, twist,or crack somewhat as they dry out.

Look on the Woodmizer site to see if they have a local person with a mill.  Otherwise, maybe someone with an Alaskan chainsaw mill.

 

I checked the Woodmizer website, and they have 16 owners listed in Missouri.

  • Author

Can't seem to find the page you're talking about on the woodmizer site.

Also don't know what a Follansbee is.

I'm thinking he might be out of luck. We don't have a saw that would cut through it. We don't even have a chain saw. Thanks for all the info.

I don't imagine a business would keep going too long taking a six pack and all day to rip a board.

 

What business?  I'm talking about you and a buddy, a six pack and a 20" panel saw.  What's the rush?  You got one of these to do, yeah?

  • Author

What business? I'm talking about you and a buddy, a six pack and a 20" panel saw. What's the rush? You got one of these to do, yeah?

That was my horrible attempt at a joke. Sorry. I don't actually know what a panel saw is.

  • Author

Well yes, i do actually have a panel saw. An old, big one.

Look up instructions on sharpening your hand saw or send it out to be sharpened. Draw a line and follow it as best you can, cut a shallow kerf all the way around and then work in deeper. Clamp the slab on edge while you are sawing.

What he said^^ Just remember you can cut that kerf the easiest way. Clamp a board to the edge of your slab to widen the table, clamp a fence to your circ saw plate and run the saw around the board at half depth for one pass and full depth after. You'll have around six inches of free kerf to guide your hand saw.

I guess I'm a hillbilly but as I think this through I'd be tempted to start with the circ or table saw, then buy a long recip saw blade before I hand ripped three foot of board. This is especially true if your handsaw is not rip filed and set.

  • Author

Okay, so this is actually sounding like a fun adventure/workout. I'll see if he's willing to do it. If we do I'll post some pics.

I ran into this problem myself recently with a large slab of walnut, and found nothing in the STL area (unless you bought from them) that would resaw, or didn't get an email reply. I ended up just biting the bullet by losing the excess and using a combination of a router sled and drum sander to get it to the size I needed. If you do find anyone who will definitively resaw large pieces, I'd like to know about them.

  • Author

That certainly does look easy. But the closest city is a still a bit far for me. Do we might end up doing it by hand.

I've used a guy named Wayne Hetlzer in St. Charles, north on Hwy 94.  He has a limited website, http://www.sawlogstolumber.com/

 

He's milled 3 cherry logs for me and did a good job at a very reasonable price.  He charges by the hour, but his mill is outside so I'm not sure this weather is that good for it right now.

 

I also am uncertain about your need.  He could do it, but it really is a small one time cut. It might cost you $75 for this one cut.  Got anything other logs to cut too?  Anyway, you could give him a call.

 

 

Tim

  • Author

Well, i do have a small black locust log that I'm holding on to. Thanks for the heads up, though.

I can resaw slabs for any of you free of charge, but you have to get it to middlesex NJ. My buddy has a woodmizer that I have full access to.

  • Author

If I ever find myself in New Jersey with a slab issue, I'll look you up.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.