EvilRick Posted January 26, 2014 Report Posted January 26, 2014 I picked up a couple of Stanley planes and the flea market today. No. 4 & No. 5, $20/ea. The No. 4 has a chipped frog. Is it worth trying to repair or will it make a difference? It's just on the leading edge and not on the part that makes contact with the top of the sole. The contact points look good and there's no rocking. Quote
Tom King Posted January 26, 2014 Report Posted January 26, 2014 It shouldn't matter. There is still plenty of support for the iron. Quote
Spencer_J Posted January 26, 2014 Report Posted January 26, 2014 Should not matter. As long as it clamps your chipbreaker and blade evenly. Might not hurt to give it a light clean/file/sand. Score!Sent from my thumbs Quote
jhl.verona Posted January 26, 2014 Report Posted January 26, 2014 As has been said above, doesn't look like a problem. Just get rid of the rust and start making shavings! Beat them down on the price too? That's ... evil ... Rick! John Quote
EvilRick Posted January 26, 2014 Author Report Posted January 26, 2014 I can't take credit for a beat down. She offered them both to me for $20/ea. I didn't balk of course. I just took them apart to check the guts. With some TLC they'll make good shavings. Now I just need to learn how to use 'em . . . Quote
calblacksmith Posted January 26, 2014 Report Posted January 26, 2014 Great price! Just tune them up and go to work, I would not worry about the chip. I thought I got a deal for two junker #4s for $30 to rebuild into one plane, you did MUCH better than I did, Congrats! Quote
G S Haydon Posted January 26, 2014 Report Posted January 26, 2014 No worries here, a light removal of rust, sharp blade = happy days. Quote
EvilRick Posted January 26, 2014 Author Report Posted January 26, 2014 Since neither seems to be in bad shape I'm just going to throw some steel wool and WD-40 at them to to take care of the rust. The smaller parts I'll hit with some WD-40 and a toothbrush. The sole is going to get some 120-220 work and I'm going to pick up some wet/dry for the iron. I'm referencing Paul Sellers. Quote
calblacksmith Posted January 26, 2014 Report Posted January 26, 2014 While many people freehand sharpening the irons, I strongly advise using a jig. I do freehand my knives but for other tools, I use a Veritas jig, yes it is pricey and there are less expensive jigs on the market, it is easy to use and get the same angle time after time. Any jig will keep the irons stable through the process and that is key to getting a very keen edge. Great score, enjoy! Quote
EvilRick Posted January 27, 2014 Author Report Posted January 27, 2014 I'll probably use a jig. Here's some before/after shots of just some WD-40 and Scotch-Brite. Quote
EvilRick Posted January 27, 2014 Author Report Posted January 27, 2014 Oh, and I think the No. 4 is a Type 20 (1962-67) and the No. 5 is a Type 17 (1942-45). Quote
TimV Posted January 27, 2014 Report Posted January 27, 2014 Cleaned up nicely. How does it feel? The chip on the frog doesn't matter a lick. (get it, Frog, lick....haha) Quote
EvilRick Posted February 8, 2014 Author Report Posted February 8, 2014 I got them both cleaned up pretty good. I need to stop by the local granite dealer to get a scrap piece so I can lap the sole. I took most of the rust off with a piece of MDF with some 100,220 glued down. I do not want to use my table saw top. I also need to really polish the lever cap and such. I do not have a bench grinder but I do have a Dremel. What polish compound should I use? I have Brasso, will that work with the non-brass parts? I think I also need to remove the japaning. There are rust spots coming through on both planes. I have someone that can sandblast it for me, but is there another way to remove it? 1 Quote
EvilRick Posted February 8, 2014 Author Report Posted February 8, 2014 Oh, and I just sanded the tote and knob with 100 and 220 and then used some Minwax mahogany stain and sealer. I did a couple of coats. I'm not sure I like the varnish so figure some wax will be fine. I like the dull look over the shiney. Quote
EvilRick Posted February 16, 2014 Author Report Posted February 16, 2014 I'm sure you're getting tired of seeing these, but here they are with fresh paint. I'm going to paint the frogs as well so they're stripping right now. I'll spare everybody anymore photos till the I'm done. Quote
EvilRick Posted February 17, 2014 Author Report Posted February 17, 2014 I'm waiting on my new honing guide and granite before I seriously lap the soles and sharpen the irons. This is addicting. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.