Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Festool

Featured Replies

What does everyone think about the festool storage containers. I was just browsing around and looking at them. They look kinda cool. But not cheap

  • Popular Post

You would have to have drunk copious amounts of the koolaid to go down that path.  That said, the insert trays available for them separately from Lee Valley (and I'm sure other places) might be a reasonable add on to some shop built drawers.  The trays seem to be the only thing even remotely connected to Festool that doesn't come with triple the price tag.

Have to agree but I do like to keep nice tools in a box with all the accessories. Easy to click onto the vac and load into the truck.

They make much more sense if you need to be mobile. The same footprint is nice to have when you are working out of a trailer or a van, but in a spacious workshop I just can't see the point. That said, I just ordered two Sys-3 boxes from Woodcraft during their sale. I don't know why, I have no idea what I'm going to store in them.

Only reason I see to get them is as mentioned above, using them in a van with a pre determined footprint. Otherwise I see them as overpriced and useless.

Unless you had a few of they're tools I don't really see the point in them sort of things.

There's always that one box or container from another company that won't fit :-/

Unless you had a few of they're tools I don't really see the point in them sort of things.

There's always that one box or container from another company that won't fit :-/

 

But they look so pretty all lined up. :)

They're fine if you already have them via a tool purchase, does make transportation a lot easier. On the other hand, sort of a burden in the shop, I have most of my Festool stuff stacked in the systainers on top of each other in columns as I have little else to store them, and it sucks playing Tetris when you just need to grab a single accessory out of a lower systainer for something. One of these days, a proper tool/Festool storage cabinet is on my list.

But back to my first comment....no, I would not buy a systainer by itself.

Preach it, EOTW.  My Festools are on shelves and in cabinets.  I'm not interested in opening a box every time I need to use a tool, or wrapping up a cord and placing it neatly in its cozy little home every time I put one away.  If they weren't so expensive, I probably would have pitched them like I've pitched every other tool case I've ever had.  But I can't bring myself to do it.  So they just take up space for no good reason.

 

If I were a pro and I had to take my tools around from job to job, different story.  In the shop?  Nah, not for me.  I certainly wouldn't spend money on the Festools when cheaper alternatives are available.

I disagree, somewhat..  

 

I don't like the systainers stacked on themselves, that is a PITA!  I also don't store the cords with them.  I built individual cabinets for the green stuff and it's a whole lot easier!  Slide out a drawer, open a lid..

 

I leave 1 cord attached to the vac and never mess with that other than to plug it into the tool.

I want to build one or two of those cabinets as well, but then you start getting into the cost of the drawer slides. It's never ending.

I want to build one or two of those cabinets as well, but then you start getting into the cost of the drawer slides. It's never ending.

 

They're not that expensive and they last a lifetime.  Just another piece of shop furniture.

They're not that expensive and they last a lifetime.  Just another piece of shop furniture.

 

I'm talking about the combined cost of the slides plus the systainers. You've spent $60+ on a piece of plastic and now you're spending around $10 or so on a set of very short slides, or more on some extra long ones so you can fit two per slot. I have a ton of 3/4 epoxy slides that really don't suit the purpose. 

I learned they burn well and will no longer keep masses of plastic in my shop. I had a wall of Festool 7ft tall 20ft long and it caused the fire in my shop to burn so hot there was never a chance of saving anything. Now the only plastic I have is 3M PPS storage and a Fein vac that is being replaced by a central vac. No more storage boxes of any brand.

I'm talking about the combined cost of the slides plus the systainers. You've spent $60+ on a piece of plastic and now you're spending around $10 or so on a set of very short slides, or more on some extra long ones so you can fit two per slot. I have a ton of 3/4 epoxy slides that really don't suit the purpose. 

 

The tools came in the systainers.  I have no plans of adding storage systainers.  For my shop, they're just impractical. I showed a couple pics of the ones I built in the shop section here in the forums.  They were built from scrap material left over from other projects so the only things purchased were the glides.  I had about 30 bucks in each cabinet.

 

This certainly isn't the answer for everyone, just worked well for me.

 

Sorry to hear of your fire PB! 

I think it would be nice if they gave you the option of buying without the systainer. Id bet money that the systainer is the real key to festoons success. :)

I disagree, somewhat..  

 

I don't like the systainers stacked on themselves, that is a PITA!  I also don't store the cords with them.  I built individual cabinets for the green stuff and it's a whole lot easier!  Slide out a drawer, open a lid..

 

I leave 1 cord attached to the vac and never mess with that other than to plug it into the tool.

 

That's pretty much what I want to do. I have considered sliding drawers with systainer top access, but in the dimensions I want, only so many systainers you can fit. So when I do eventually get around to building it, I might just do regular drawers as several tools can take up one spot and I can have an accessories drawer. I'll probably put the systainers up in my storage closets in my loft and bring them out if I need to work on something out of the shop. Don't agree with tossing them out entirely, they are well designed and have thought put into them (compared to other tool manufacturer's 'cases') and it could harm resale value a bit if I ever choose to do that.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.